Perfume filling machine wholesale- Manufacturers Suppliers Factory From China

The Cosmetic Filling Machine and Capping machine is a professional cosmetic filling and capping equipment, which can make the cap tighter without damaging the mouth of the bottle and effectively protect the cosmetics from contact with the outside world. Next, let's take a look at the use and maintenance of the Cosmetic Filling machine and the capping machine. Here are some answers.

Here is the content list:

l Instructions for use of Cosmetic Filling machine And Capping machine.

l How is the daily maintenance of the Cosmetic Filling machine And Capping machine?

Instructions for use of Cosmetic Filling machine And Capping machine.

First, because the Cosmetic Filling Machine and Capping machine is an automated machine, the dimensions of the pop-up bottle, bottle liner, and bottle cap are required to be uniform. Second, before driving, you must first use the crank handle to turn the machine to see if there is any abnormality in the rotation, and then you can drive after it is confirmed that it is normal. Third, when adjusting the machine, the tools should be used appropriately. It is strictly forbidden to use excessive tools or excessive force to dismantle the parts to avoid damage to the machine parts or affect the performance of the machine. Fourth, the Cosmetic Filling machine and the Capping machine must be kept clean. Before the shift, all parts of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department. It should be scrubbed once a week, especially the areas that are not easily cleaned in normal use or blown with compressed air.

How is the daily maintenance of the Cosmetic Filling machine And Capping machine?

First, the Cosmetic Filling Machine and the Capping machine has strict requirements for the placement environment and must ensure the indoor humidity is moderate, ventilated, and hygienic. Because the Cosmetic Filling Machine and Capping machine is a mechanical device, after all, the raw materials are some steel electromechanical, etc. It is easy to rust when placed in a humid environment, and a closed environment is not conducive to the heat dissipation of the equipment during operation. Second, you must ensure that the power supply is normal and the grounding wire is safe before use. Voltage instability can cause considerable damage to the machine. Third, the non-woven soft cloth and cleaning agent must be added to wipe off the oil or dirt and wipe dry before the Cosmetic Filling machine and capping machine are operated. After use, take out all the remaining materials to prevent the materials from corroding the equipment and scrub them clean. Periodically clean the invisible dust and garbage in the chassis. And adhere to the tightness of the mechanical parts. Fourth, clean up the machine regularly. Many companies conduct major maintenance on machinery and equipment once a year in autumn. Fifth, add lubricating oil to the mechanical components of the Cosmetic Filling machine and Capping machine regularly to reduce frictional resistance and make the machine run faster.

Our official website is https:// www.cnzpack.com/. If you are engaged in work related to Cosmetic Filling machines and Capping machines or want to learn more about our company, you can communicate with us on the website.

Tube Filling machine And Sealing machine adopt the latest module circuit, stable working performance, high efficiency, and all components adopt famous brand products. Under the careful design of our company, various advanced Tube Filling Machine And Sealing machines have been produced. Mainly used for sealing toothpaste, cosmetics, medicine, food, industrial products, and various hoses. Next, let's take a look at the cleaning and maintenance of the Tube Filling machine And Sealing machine. Here are some answers.

Here is the content list:

• Tube Filling machine And Sealing machine cleaning.

• Daily maintenance of Tube Filling machine And Sealing machine.

Tube Filling machine And Sealing machine cleaning.

First, regularly clean the surface of the Tube Filling machine And Sealing machine, the bottom plate and the lower mold slide plate, grooves, the upper mold inner pressure plate, and the positioning rod. Second, grease should be added to the transmission parts of the lower mold slide plate, pressing rod bearing, eccentric wheel and guidepost, guide rail, and so on regularly to ensure the performance of the Tube Filling Machine And Sealing machine. Third, the method of cleaning the toothed knife: first plug the two drain holes of the lower mold with a cotton ball, pour boiling water into the groove of the lower mold, until it is full, then push the slide of the lower mold into place, and lower the upper mold. Press to the lowest point, let the toothed knife soak for a few minutes until it is clean, repeat several times.

Daily maintenance of Tube Filling machine And Sealing machine.

First, check the equipment ground wire frequently to ensure reliable contact; clean the weighing platform frequently; check whether the pneumatic pipeline is leaking and whether the air pipe is broken. Second, change the lubricating oil of the reducer motor every year, check the tightness of the chain, and adjust the tension in time. Third, the sensor of the Tube Filling Machine And Sealing machine is a high-precision, high-sealing, and high-sensitivity device. Impact and overload are strictly prohibited, and no contact is allowed during the working process, and it is not allowed to be disassembled if it is not required for maintenance. Fourth, if it is not used for a long time, empty the material in the pipeline. Fifth, observe the moisture filter and oil mist device of the pneumatic combination two-piece before going to work every day. Sixth, during the production, we should always patrol and observe the mechanical parts to see if the rotation and lifting are normal if there is any abnormality, and if the screws are loose. Seventh, do a good job of cleaning and sanitation, keep the surface of the Tube Filling machine And Sealing machine clean, often remove the accumulation on the scale body, and pay attention to keeping the electric control cabinet clean.

Wenzhou Zungwan Intelligent Machine Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream, ointment, fluid, and semi-fluid materials. If you are engaged in work related to Tube Filling machine And Sealing machine or want to know more about our company, you can contact us. Our official website is https:// www.cnzpack.com/.

Bottle Unscrambler scientific maintenance and daily management institutionalization are very important. Scientific maintenance and the establishment of a daily management and use system have a very important role and significance for the actual use of mechanical products. It improves the standardization and performance of daily maintenance. It is more convenient for people to choose, especially it can be better suited to play the role of mechanical products in actual production. It is necessary to carry out reasonable maintenance and management of Bottle Unscrambler to improve the performance advantages of the product itself and let Bottle Unscrambler can help production in time during operation. So what are the precautions for Bottle Unscrambler? Let's take a look together next.

This is the content list:

l Things to do when installing Bottle Unscrambler

l Precautions when using Bottle Unscrambler

l Matters needing attention when cleaning the automatic Bottle Unscrambler

Things to do when installing Bottle Unscrambler

1. Before installing the Bottle Unscrambler, we need to check the Bottle Unscrambler thoroughly to see if the materials are complete and whether it is damaged. If you find a problem, please communicate with the manufacturer in time to solve it.

2. After checking the completion of the Bottle Unscrambler, follow the installation instructions to assemble the Bottle Unscrambler and adjust accordingly. Then add lubricating oil to the place that needs lubrication to ensure the flexibility of the Bottle Unscrambler.

3. After the test run Bottle Unscrambler, if it runs normally, it means that the installation of Bottle Unscrambler is completed.

Precautions when using Bottle Unscrambler

1. According to Bottle Unscrambler production conditions, choose to use a power supply that meets Bottle Unscrambler specifications.

2. To prevent electric shock, the Bottle Unscrambler must be well-grounded. Please equip the Bottle Unscrambler with a power socket with a ground wire.

3. After turning off the Bottle Unscrambler power switch, there is still strong voltage in some circuits in the electrical control of the machine. If the control circuit needs to be repaired, the power cord must be unplugged to avoid electric shock.

Matters needing attention when cleaning the automatic Bottle Unscrambler

1. If the company needs to disassemble and wash the Bottle Unscrambler, please do not turn off the air source and power supply.

2. Avoid electric shock to Bottle Unscrambler. When disassembling the Bottle Unscrambler, do not directly rinse the body with water, because the Bottle Unscrambler is equipped with electrical control components. If the components contact the water source, there is a risk of electric shock and may damage the Bottle Unscrambler components.

3. It is strictly forbidden to show the residues of the filled items on the Bottle Unscrambler, such as oil stains, paints, etc. The existence of these things will accelerate the corrosion of the Bottle Unscrambler and affect its service life. If any residual items are found, they should be cleaned up in time.

4. Lubricate the Bottle Unscrambler regularly, clean the Bottle Unscrambler every once in a while, and make a cleaning record for later review.

We have obtained ISO9001 quality management system certification, and some products have passed CE certification. The production of Bottle Unscrambler is strictly controlled. If you are interested in Bottle Unscrambler, you can contact us. Our website is www.cnzpack.com.

The Cosmetic Filling machine And Capping machine has a wide range of applications, not only in the cosmetics industry but also in food, daily chemical, pharmaceutical, and other industries. It is very flexible to use, can be adapted to different bottle mouths, and the operation is relatively simple and quick. Because of its unique advantages, it has won unanimous praise from customers. Next, let's take a look at the advantages, characteristics, and manufacturer introduction of Cosmetic Filling machines And Capping Machines. Here are some answers.

Here is the content list:

l Advantages of Cosmetic Filling machine And Capping machine.

l The performance characteristics of Cosmetic Filling machine And Capping machine.

l Introduction of Cosmetic Filling machine And Capping machine manufacturer.

Advantages of Cosmetic Filling machine And Capping machine.

Cosmetic Filling Machine And Capping machine integrates mechanical, pneumatic, and automatic. The characteristics of a high degree of automation, high output, wide application, and good stability make this machine more popular. The Cosmetic Filling machine And Capping machine can automatically unscramble bottles, fill, seal, cap, and label. Equipped with an automatic internal plug-in row and external cover plug test, it can realize no internal plug and non-external plug and eliminate the non-external plug. The labeling adopts a belt rolling structure, a fast-rolling structure, and an 8-dimensional angle adjustment label to realize the labeling of two symmetrical labels or high-precision labeling.

The performance characteristics of Cosmetic Filling machine And Capping machine.

First, the man-machine interface setting, intuitive and convenient operation, PLC control, accurate loading. Frequency conversion control, arbitrary adjustment of production speed, automatic counting. Second, the Cosmetic Filling machine And Capping machine is made of stainless steel, which meets GMP requirements. Third, the equipment fully complies with GMP requirements. Microcomputer setting, accurate filling volume, convenient operation, automatic shutdown function, automatic shutdown for any track with continuous no filling and no internal clogging. Fourth, the Cosmetic Filling machine And Capping machine is easy to operate and easy to maintain.

Introduction of Cosmetic Filling machine And Capping machine manufacturer.

Wenzhou Zungwan Intelligent Machine Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream, ointment, fluid, and semi-fluid materials. We have obtained ISO9001 quality management system certification, and some products have passed CE certification. Our company has obtained more than 20 invention patents and utility model patents. The quality of our Cosmetic Filling Machine And Capping machine and service as well as our integrity are widely praised at home and abroad.

The first-class quality of Cosmetic Filling machine And Capping machine and efficient and fast after-sales service have created the excellent products of "Zhonghuan". Cosmetic Filling Machine And Capping machine is in great demand in domestic and foreign markets. Keep improving, develop to satisfy customers, and satisfy market demands are our eternal topic and our sincere commitment to customers.

Our official website is https:// www.cnzpack.com/. If you are engaged in work related to Cosmetic Filling machines And Capping machines or want to learn more about our company, you can communicate with us on the website. We wholeheartedly provide users with better products and services!

With the increasingly fierce competition in the manufacturing and production of plastic bottles in the food and pharmaceutical industries, Bottle Unscrambler has become more and more solid backing for the food and pharmaceutical plastic bottle markets. So how does it play a role? We will introduce the work process and personnel operation specifications of Bottle Unscrambler. Let's take a look together next.

This is the content list:

• The workflow of Bottle Unscrambler

• Personnel operation specification of Bottle Unscrambler

The workflow of Bottle Unscrambler

The workflow of Bottle Unscrambler is generally as follows: manually put materials into the storage bottle library, the materials in the storage bottle library will be automatically quantified and fed to the turntable at the set speed. The turntable rotates at a high speed to supply the bottles as required, the web wheel The irregular bottles are removed, and the bottle dividing part sends the bottles from the turntable to the bottle unscramble part at a certain speed. The Bottle Unscrambler part of the Bottle Unscrambler clamps the bottles to the working surface of the conveyor through the conveyor belts on both sides, and at the same time sorts the bottles through the bottle turner. The Bottle Unscrambler electronic control system performs real-time monitoring and feedback through the sensors of each part to achieve fully automated operation requirements, and save a lot of labor costs and avoid losses caused by human error factors.

Personnel operation specification of Bottle Unscrambler

To ensure the normal and safe operation of Bottle Unscrambler, there are special operating procedures established for it. Operators and equipment management personnel shall perform standardized operations of Bottle Unscrambler under these procedures. This safe operation specification is commonly used in Bottle Unscramblers, mixers, high-speed automatic Bottle Unscramblers, etc.

1. First check the Bottle Unscrambler's intact, clean, and expiration status identification and the equipment operation record of the shift. If the inspection finds that the Bottle Unscrambler has exceeded the cleaning validity period, it is necessary to further clean the equipment according to the equipment cleaning operation rules and fill in the equipment status identification.

2. Check the Bottle Unscrambler and the Bottle Unscrambler to confirm that there is no foreign matter, and turn the bottle plate and unscrambler to confirm that it can work normally.

3. Turn on the Bottle Unscrambler power switch, check the touch screen and three photoelectric switches. If both are energized, the lack of a bottle alarm will be displayed on the touch screen. When the electric eye is blocked by hand, the screen displays the blocking alarm, and the two photoelectric switches are in a normal state.

4. Turn on the Bottle Unscrambler compressed air, use the bottom of the bottle to shake under the electric eye of the bottle puller, compressed air will be sprayed out, and the equipment can be turned on normally.

To ensure that the various parts of the Bottle Unscrambler can work normally, the formal operation can be divided into five steps: click the host start and lift start on the touch screen respectively, and observe whether the Bottle Unscrambler has abnormal noise when it is running. After powering on the Bottle Unscrambler and confirming that there is no abnormal condition, stop the device, but the qualified infusion bottle upright in the bottle feeding bracket, and start the device again. The bottle will pass through the rotating carousel of the device and enter the conveyor belt to start the bottle unscramble operation. Run at low speed when starting up, and then adjust the lifting speed and unscramble speed according to the actual production, so that the speed of the Bottle Unscrambler equipment can match the actual production speed. To prevent such phenomena from happening. If such a phenomenon occurs, stop the machine immediately to eliminate the fault before it can continue to run. During the operation of the equipment, the bottles should be put in continuously, and observe whether there are phenomena such as pouring, jamming, broken bottles, etc. If any, stop the machine immediately and start the production after troubleshooting. After the production is over, stop the equipment, turn off the power of the Bottle Unscrambler, and clear the remaining materials out of the equipment.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. When the Liquid Filling Machine leaves the factory, it will provide customers with detailed Liquid Filling Machine operation procedures and operating specifications. If you are interested in Liquid Filling Machine, you can contact us, our website is www.cnzpack.com.

Pharmaceutical Filler and Capper, whether semi-automatic or fully automatic, will encounter more or less in the process of using different places of failure, in the face of Pharmaceutical Filler and Capper's special parts of the failure, how do we find the problem as soon as possible and solve it? Let's take a look at it.

This is the content list:

l Pharmaceutical Filler and Capper's PLC failure

l Pharmaceutical Filler and Capper's Magnetic Switch Failure

l Pharmaceutical Filler and Capper solenoid valve failure

Pharmaceutical Filler and Capper PLC Failure

If the point controls Pharmaceutical Filler and Capper, the fault phenomenon is that the motor runs after the signal start Pharmaceutical Filler and Capper, but the motor does not stop running after the stop signal is issued. And Capper only stops running when the PLC is powered down. If the point controls the solenoid valve. The fault phenomenon is that the solenoid valve coil is not energized, and the cylinder is not reset. If the PLC of Pharmaceutical Filler and Capper is hit with external force to make the sticking point separate, it can assist to determine the fault of Pharmaceutical Filler and Capper.

Pharmaceutical Filler and Capper's magnetic switch failure

Pharmaceutical Filler and Capper's magnetic switch is used to detecting the position of the cylinder and control the cylinder travel. The four cylinders of laminating, pushing, pressing, and fusing knife are interrelated, and the magnetic switch is used to detect and control their positions. Pharmaceutical Filler and Capper failure is mainly manifested as the subsequent cylinders do not move, because the cylinder speed of Pharmaceutical Filler and Capper is faster, which causes the magnetic switch cannot detect the signal. Such as pushing the package cylinder speed is too fast, after pushing the package reset, the pressure package and fusion knife cylinder do not move.

Solenoid valve failure of Pharmaceutical Filler and Capper

Pharmaceutical Filler and Capper solenoid valve failure is mainly manifested as the cylinder does not move or does not reset, the reason is that Pharmaceutical Filler and Capper cylinder solenoid valve cannot change direction or tampering air. If the solenoid valve falters, the air pressure of Pharmaceutical Filler and Capper can't reach the working pressure because the inlet and outlet air paths are connected, and the knife beam doesn't rise to the place. the proximity switch of Pharmaceutical Filler and Capper knife beam protection doesn't work, and the precondition of full machine operation is not established. Pharmaceutical Filler and Capper does not operate, which is easily confused with an electrical fault. Solenoid valve air leakage sound, listen carefully to the source of sound and hand search for air leakage points, generally can easily identify the air leakage solenoid valve.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer, with first-class product quality and efficient and fast after-sales service, forging the excellent products of "Central". Pharmaceutical Filler and Capper will undergo a lot of product testing before leaving the factory to reduce the probability of failure of Pharmaceutical Filler and Capper, and also provide customers with high-quality Pharmaceutical Filler and Capper warranty service. If you are interested in Pharmaceutical Filler and Capper, you can contact us, our website is www.cnzpack.com.

In our production and life, the unscrambler has an important influence on us. So what are the types of Bottle Unscrambler? Let's take a look together next.

This is the content list:

l Gravity Bottle Unscrambler

l Water-floating and baffled Bottle Unscrambler

l Friction Bottle Unscrambler

l Centrifugal Bottle Unscrambler

Gravity Bottle Unscrambler

The basic principle of the gravity-centered Bottle Unscrambler is to use the characteristics of the division of the bottle's center of gravity during the finishing process. If the bottle is facing forward, the center of gravity of the Bottle Unscrambler will be close to the bottom of the bottle, so that the bottle will not change its arrangement. If the bottle is reversed, the center of gravity will be at the upper part of the bottle, the center of gravity of the bottle will be unstable, this function is suitable for use in the Bottle Unscrambler, which is a heavy glass bottle.

Water-floating and baffled Bottle Unscrambler

The basic principle of the water-floating and baffled Bottle Unscrambler is to use the buoyancy principle of water in the conveying stage to convey the bottles to the finishing stage. In the Bottle Unscrambler finishing stage, baffle A is used to make the bottles forward. There is a rectangular cavity on the baffle that fits the bottle mouth. When the bottle mouth of the Bottle Unscrambler comes over, the mouth of the bottle will enter the rectangular cavity, so that the bottom of the bottle is lowered first, and the mouth of the bottle is lowered, and the bottle will be output in the forward direction. When the bottom comes over, the baffle does not work, and the Bottle Unscrambler bottle is output in the forward direction.

Friction Bottle Unscrambler

The basic principle of the friction Bottle Unscrambler is to use the friction of the belt to transport the bottles in the finishing stage, and to adjust the bottles by the friction in the finishing stage. Compared with the above two schemes, this scheme has the advantage of high-efficiency Z, and there are no other unnecessary processes, such as cleaning phases. The structure design of the Bottle Unscrambler mainly utilizes the friction of the belt, and the friction type Bottle Unscrambler enables the bottle to flip under high-speed movement, and achieves high efficiency, and improves processing efficiency.

Centrifugal Bottle Unscrambler

The basic principle of the centrifugal Bottle Unscramble is to use the centrifugal force of the disc to bring the bottle close to the outside of the ring, and then use the different characteristics of the bottom and the width of the bottle mouth to turn the bottle mouth downwards. The function of the centrifugal Bottle Unscrambler is to manually add materials to the storage bottle library for storage. The materials in the storage bottle library will be automatically quantified and fed to the turntable at a set speed. The turntable rotates at a high speed to supply the bottles as required. The web wheel the irregular bottles are removed, and the bottle dividing part sends the bottles from the turntable to the bottle unscramble part at a certain speed. The unscrambler part clamps the bottles to the working surface of the conveyor through the conveyor belts on both sides, and at the same time sorts out the bottles through the bottle turning device. It is an indispensable machine for high-speed production to realize fully automated operation, and it saves a lot of labor costs and avoids losses caused by human error factors.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer with good development in the quality of Bottle Unscrambler products. If you are interested in Bottle Unscrambler, you can contact us. Our website is www.cnzpack.com.

We know that Labeling Machine brings great convenience to our production and life, so what are the working principles and performance characteristics of Labeling Machine? Let's go take a look next.

This is the content list:

l How the Labeling Machine works

l Performance characteristics of Labeling Machine

How the Labeling Machine works

First of all, the working principle of the Labeling Machine is to put the roll of labels in place, and then put the round bottle on the conveyor belt. The labeling head of the Labeling Machine is set at a fixed distance. The labeling wheel and the rotating shaft are used to move the label. Separate from the base film, it should be noted that the Labeling Machine label tape needs to be kept in a constant state during this operation.

Then, the Labeling Machine conveyor belt pushes the round bottle. When it is transferred to the area, the driving wheel will slow down and stop applying the label to the bottle. The Labeling Machine logo can be applied to the entire bottle or half of the bottle. The basic working principle is the same.

The above is the working principle of the Labeling Machine. At present, Labeling Machine has been widely used in the market, gradually replacing manual labeling, and the labeling speed of the prototype Labeling Machine is much higher than that of manual operation, and the accuracy is also higher. The cost of manual operation is lower than that of manual operation. Therefore, the circular Labeling Machine is more demanded by consumers.

Performance characteristics of Labeling Machine

1. The Labeling Machine is equipped with a double-labeling mechanism. Labeling Machine to ensure the accuracy of labeling, Labeling Machine double extrusion labeling can effectively eliminate air bubbles, to ensure that the label head and tail are tightly attached.

2. Labeling Machine intelligent control, automatic photoelectric tracking, Labeling Machine with no labeling, no label automatic correction and automatic detection of the label function, Labeling Machine to avoid wasting labels and missing labels.

3. Labeling Machine with elastic pressure top mechanism to ensure stable product delivery, Labeling Machine effectively eliminates the inherent error of the bottle height.

4. The Labeling Machine is equipped with an automatic bottle splitting mechanism, which automatically separates the spacing before the bottle guide, Labeling Machine to ensure the stability of the subsequent bottle guide, conveying, and labeling.

5. The Labeling Machine adopts a double-sided hard plastic synchronous guide chain to automatically ensure the neutrality of the bottle.

6. Labeling Machine has little requirement for workers to put bottles and assembly line to receive bottles, which greatly reduces the difficulty of workers' work or assembly line docking. Labeling Machines can be produced on a single machine or connected with assembly-line production.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It strictly controls the production of Labeling Machines and uses the working principle and performance characteristics of Labeling Machines to produce Labeling Machines that are more in line with consumer needs. If you are interested in Labeling Machines, you can contact us, our website is www.cnzpack.com.

ARANOWs offers food stick pack and flat sachet packaging solutions. Food and cosmetic industries, especially for products in granulate, liquid or powder form that are sold Flat sachet for powdered shampoo (Cosmetics and Chemical ) ARANOW Packaging Machinery is speciallized in stickpack packaging machines. Contact Us Send Inquiry

Ton-bag Packaging Machine Brand: Finopack Model: FP1000AG/FP1000SG Warranty: 1 Years Factory direct sale

21/10/2021· This machine is suitable for filling production and freezing molding of lip balm.

The number one mid-range counting and bottle filling solution for solid dose products. Fills up to 55 bottles per minute. Extremely versatile and reliable tablet and capsule counting and bottle filling system for the pharmaceutical, nutraceutical and generic drug industry. IBC 150 Integrated systems: innovative bottle lines for solid dose products.

Being a pioneer Perfume Filling Machine Manufacturer in the industry, we are backed with the enriched industrial experience. Striving our best in the domain of the industry, our well-experienced Perfume Filling Machine Manufacturer manufacture a volumetric liquid filling machine which is only meant for the volume filling applications.

Handheld Bottle Capping Machine Sealing Screwing Machine With Security Ring from

Machine is motorized incorporating rotating threading

Aninsen CLC-3600 on textile products, can suppress mosquito-transmitted diseases such as West Nile fever, malaria and Japanese encephalitis. Finishing textiles with Aninsen CLC-3600 keeps mosquitoes away from the processed surface before blood sucking behavior. Aninsen CLC-3600 MECHANISM OF REPELLENT ACTION: