











After the Labeling machine sensor sends a signal that the labeling object is ready to be labeled, the drive wheel on the Labeling machine turns up. As the rolled label is in a tight state on the equipment, when the Labeling machine backing paper is tightly attached to the peeling plate and changes direction, the Labeling machine label is forced to disengage due to the rigidity of its material and is ready to be labeled. At this time, the labeling object is located just below the label, under the action of the labeling wheel, to achieve synchronous labeling. After the Labeling machine has finished labeling, the sensor under the roll label sends a stop signal, the drive wheel comes to a standstill, and a labeling cycle end. No matter which type of Labeling machine, the labeling process is roughly the same. The difference is that the installation position of the Labeling machine is different, the labeling object is conveyed differently and positioned differently, and the form of the labeling roller of the Labeling machine is also different. So, what are the Labeling machine's requirements for labels? Let's look at it together next.
This is the content list:
l Surface material
l Release force
l At the end of the paper
l Processing quality
Surface material
Labeling machine label stiffness is the key to labeling, so the Labeling machine surface material is required to have a certain strength and hardness. Labeling machine label stiffness and the thickness of the material and the area of the label, so the Labeling machine in the use of soft film material should be appropriate to increase its thickness, generally controlled at 100μm or more. Labeling machine thin paper materials, such as 60 ~ 70g/m2 labeling paper, are generally not suitable for the production of large labels, but suitable for processing into small labels, such as price tags used on the price tag. Labeling machine label stiffness is not good, it will cause labeling out of the label, or label and backing paper reward so that the automatic labeling failure.
Peel-off force
Labeling machine peel-off force is the force at which the label is separated from the backing paper by the Labeling machine. The Labeling machine release force is related to the type and thickness of the adhesive, the silicone coating on the surface of the backing paper, and the ambient temperature at the time of labeling. If the Labeling machine release force is too small, the label will easily fall off (leave the backing paper) during the conveying process. The Labeling machine's release force is too large, the label will be difficult to detach from the backing paper, and it will not be able to produce labels. The Labeling machine should be integrated control of the technical indicators so that the release force is maintained within a reasonable range.
At the end of the paper
Is also an important indicator to control automatic labeling. The requirements of the Labeling machine base paper surface silicon-coated evenly, the Labeling machine peeling force is consistent. Uniform thickness and good tensile strength ensure that the Labeling machine will not break when labeling. Uniform thickness and good light transmission of the Labeling machine ensure that the sensor can correctly identify the location of the label.
Processing quality
Requires that both sides of the Labeling machine backing paper after slitting should be flat and free of fracture to avoid the backing paper from breaking when the tension changes. Labeling machine die-cutting, to avoid cutting through the backing paper or damage to the silicone layer. If the Labeling machine backing paper and silicone coated layer are destroyed, the Labeling machine backing paper will break easily or the glue in the label will penetrate the backing paper. In addition, the static electricity in the web label must be eliminated before Labeling machine labeling, because static electricity will lead to Labeling machine labeling failure or labeling inaccuracy.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. Before the Labeling machine leaves the factory, it will conduct a large number of tests on the Labeling machine to maintain the healthy development of the Labeling machine market. If you are interested in the Labeling machine, you can contact us, our website is www.cnzpack.com.
We know that Labeling Machine brings great convenience to our production and life, so what are the working principles and performance characteristics of Labeling Machine? Let's go take a look next.
This is the content list:
l How the Labeling Machine works
l Performance characteristics of Labeling Machine
How the Labeling Machine works
First of all, the working principle of the Labeling Machine is to put the roll of labels in place, and then put the round bottle on the conveyor belt. The labeling head of the Labeling Machine is set at a fixed distance. The labeling wheel and the rotating shaft are used to move the label. Separate from the base film, it should be noted that the Labeling Machine label tape needs to be kept in a constant state during this operation.
Then, the Labeling Machine conveyor belt pushes the round bottle. When it is transferred to the area, the driving wheel will slow down and stop applying the label to the bottle. The Labeling Machine logo can be applied to the entire bottle or half of the bottle. The basic working principle is the same.
The above is the working principle of the Labeling Machine. At present, Labeling Machine has been widely used in the market, gradually replacing manual labeling, and the labeling speed of the prototype Labeling Machine is much higher than that of manual operation, and the accuracy is also higher. The cost of manual operation is lower than that of manual operation. Therefore, the circular Labeling Machine is more demanded by consumers.
Performance characteristics of Labeling Machine
1. The Labeling Machine is equipped with a double-labeling mechanism. Labeling Machine to ensure the accuracy of labeling, Labeling Machine double extrusion labeling can effectively eliminate air bubbles, to ensure that the label head and tail are tightly attached.
2. Labeling Machine intelligent control, automatic photoelectric tracking, Labeling Machine with no labeling, no label automatic correction and automatic detection of the label function, Labeling Machine to avoid wasting labels and missing labels.
3. Labeling Machine with elastic pressure top mechanism to ensure stable product delivery, Labeling Machine effectively eliminates the inherent error of the bottle height.
4. The Labeling Machine is equipped with an automatic bottle splitting mechanism, which automatically separates the spacing before the bottle guide, Labeling Machine to ensure the stability of the subsequent bottle guide, conveying, and labeling.
5. The Labeling Machine adopts a double-sided hard plastic synchronous guide chain to automatically ensure the neutrality of the bottle.
6. Labeling Machine has little requirement for workers to put bottles and assembly line to receive bottles, which greatly reduces the difficulty of workers' work or assembly line docking. Labeling Machines can be produced on a single machine or connected with assembly-line production.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It strictly controls the production of Labeling Machines and uses the working principle and performance characteristics of Labeling Machines to produce Labeling Machines that are more in line with consumer needs. If you are interested in Labeling Machines, you can contact us, our website is www.cnzpack.com.
As people are enjoying life more and more now, most of the manual labor has been replaced. It is machine consumption. Mechanized operations not only restrict our hands, but more importantly, machine consumption is more efficient than our manual work. It is not only a little bit higher but also more hygiene, which has many benefits. Cartoning Machine is one such automated equipment. So, what are the feed inlets and characteristics of the Cartoning Machine? Let's go take a look next.
This is the content list:
l The feed inlet of the Cartoning Machine
l Features of Cartoning Machine
The feed inlet of the Cartoning Machine
Cartoning Machine feed is generally divided into three entrances: manual entrance, medicine bottle entrance, and machine package box entrance. The entire process of the Cartoning Machine from the machine package box feeding to the final packaging molding can be roughly divided into four stages: the carton is fixed by a guide rail and a push plate is used to open the carton. At the same time, there will be two cards that can move forward. The position is raised from below, jamming the sides of the carton from front to back, so that the box opens at a right angle and moves forward to the loading area.
After filling in the Cartoning Machine loading area, the mechanism of the machine folds the ears into the left and right guide rails and then performs the lid closing action. The front mechanism of the Cartoning Machine will first bend the tongue of the carton, and then a push plate pushes the lid to bend so that the tongue is inserted into the box and the lock is fastened. The closing action of the Cartoning Machine is critical, and the quality of the completion has a lot to do with the structure of the carton and the accuracy of the machine adjustment.
Features of the cartooning machine
1. Cartoning Machine has a low cost. Cartoning Machines can continue to work 24 hours a day. As long as the regular maintenance work is done, it can continue to produce as much as possible, and the production line only needs one or two people to take care of it, which effectively saves labor costs. Moreover, since the work of the Cartoning Machine is mass production, the products produced are more up to the standard with small differences. In addition to the high labor costs and individual differences in products, manual packaging is also affected by the emotions of workers.
2. Cartoning Machine has high production efficiency. The Cartoning Machine takes a fixed amount of time to complete a piece of cartooning work. In a fixed period, the total amount of products that can be completed is also fixed, and it will not be fluctuating. For enterprises, it is easier to calculate and control the cost. In addition, the Cartoning Machine has a fixed time to complete a piece of boxing work, and its efficiency is relatively improved. It can reduce the pressure on the staff in related positions, better manage, make the work orderly, and create more profits for the enterprise. many.
3. The Cartoning Machine has a high safety factor. Manual cartooning is unavoidable for negligence and fatigue, and accidents are prone to work accidents. The Cartoning Machine is used throughout the machine, with high accuracy of repeated operations, good stability, and strong safety. It can effectively prevent injuries to workers. Contribute to the safe and civilized production of enterprises.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It has a lot of experience in the production of cartooning machines. A large number of tests have been carried out before the Cartoning Machine leaves the factory to ensure the quality of the Cartoning Machine. If you are interested, you can contact us, our website is www.cnzpack.com.
The tube Filling machine And the Sealing machine are determined by multiple parameters. It is impossible to describe a Tube Filling machine And Sealing machine with any single parameter. Shaft power, blade displacement, pressure head, blade diameter, and filling speed are the five basic parameters that describe a Tube Filling Machine And Sealing machine. So, let's take a look at the principle of the Tube Filling machine And Sealing machine together. Here are some answers.
Here is the content list:
l Basic parameters.
l The shear rate of the fluid.
l Small slot and big slot.
Basic parameters.
The displacement of the blade is proportional to the flow rate of the blade itself, the first power of the blade speed, and the third power of the blade diameter. The shaft power consumed by the filling is proportional to the specific gravity of the fluid, the power standard of the blade itself, the third power of the speed, and the fifth power of the blade diameter. In the case of a certain power and blade form, the blade displacement and pressure head can be adjusted by changing the diameter of the blade and the matching of the speed. That is, the large diameter blade is equipped with a low-speed Tube Filling machine And a Sealing machine. High flow effect and low-pressure head, while the small diameter blade with high speed produces a higher pressure head and lower flow effect.
The shear rate of the fluid.
In the filling tank, the only way to make the micelles collide with each other is to provide a sufficient shear rate. According to the mechanism of the Tube Filling Machine And Sealing machine, it is because of the existence of fluid velocity difference that the fluid layers are mixed. Therefore, where the filling process always involves the fluid shear rate lhhaha620. Shear stress is a force that is the real cause of bubble dispersion and droplet breaking in filling applications. It must be pointed out that the shear rate at each point of the fluid in the entire stirred tank is not the same.
Small slot and big slot.
Experimental research shows that, as far as the blade area is concerned, no matter what type of blade, when the diameter of the blade is constant, the maximum shear rate and the average shear rate increase with the increase of the speed. However, when the rotation speed is constant, the relationship between the maximum shear rate and the average shear rate, and the diameter of the blade is related to the slurry type. When the rotation speed is constant, the maximum shear rate of the radial blade increases with the increase of the blade diameter, and the average shear rate has nothing to do with the diameter of the blade. These concepts about the shear rate of the blade area require special care in the design of the Tube Filling Machine And Sealing machine to reduce and enlarge. Because the small groove is compared with the large groove, the small groove Tube Filling Machine and Sealing machine often has the characteristics of high speed, small blade diameter, and low tip speed. The large groove Tube Filling Machine And Sealing machine often has the characteristics of low speed, large blade diameter, and high tip speed.
Our official website is https:// www.cnzpack.com/. If you are engaged in work related to the Tube Filling machine And Sealing machine, you can communicate with us on the website.
Now Bag Packing Machine is the most popular packaging equipment in the market, and it is used in all walks of life. Now the ubiquitous refractory materials, coffee, salt, MSG, potato chips, etc. are packed in a variety of packaging, then What are the general characteristics of a Bag Packing Machine? Let's take a look together next.
This is the content list:
l Standardization and modularization of Bag Packing Machine structure design
l Bag Packing Machine packaging speed increases
l High-precision structure movement of Bag Packing Machine
l Bag Packing Machine control is intelligent and flexible
Standardization and modularization of Bag Packing Machine structure design
When using a Bag Packing Machine to complete the packaging of different materials, the modular design of the original model can be used to quickly change the specifications or convert to other packaging models in a short time. The Bag Packing Machine is not the metering system that provides enough space.
Bag Packing Machine packaging speed increases
At present, the single-line packaging speed of the small Bag Packing Machine is generally 30-120 bags/min. Compared with the manual, the packaging speed is greatly accelerated. The Bag Packing Machine is more helpful for enterprises to realize automatic packaging and save time and cost.
High-precision structure movement of Bag Packing Machine
Because Bag Packing Machine adopts various new technologies, such as high-precision mechanical control of various actions through servo motors, encoders and digital control (NC), power load control PLC, etc., the filling and metering accuracy of the Bag Packing Machine is reduced. The bag-making accuracy has been improved.
Bag Packing Machine control is intelligent and flexible
Most Bag Packing Machines track and adjust various mechanical parameters through intelligent control instruments and menu-type software on the touch screen. The Bag Packing Machine electronic display shows the length of the bag, the packing speed, the net content of the filling and the packing output, etc., which can be understood at a glance. The standard color code tracking photoelectric system can ensure the correct printing patterns of the packaged products. In addition, Bag Packing Machine can perform online status monitoring and fault diagnosis analysis of the working process. Once a problem occurs, Bag Packing Machine will automatically stop and display the cause and solution of the fault.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream/ointment, fluid, and semi-fluid materials. The quality of our machines and services as well as our integrity are widely praised at home and abroad. We will carry forward the spirit of "comprehensive innovation and perseverance", self-discipline and strive for the first place, and provide new and old customers with better and more complete services with enthusiasm and a new attitude. The production of the Bag Packing Machine is strictly controlled. The company uses the characteristics of the Bag Packing Machine to improve it to meet the needs of consumers. If you are interested in Bag Packing Machine, you can contact us. Our website is www.cnzpack.com. We look forward to your coming and very much hope to cooperate with you.
They ordered two hand sanitizer filling lines, requiring a speed of 150 bottles per minute, from automatic bottle management - automatic filling - automatic cap management - automatic capping - automatic labeling.
The whole production line was designed, developed and produced by our company, and it took 70 days from the finalization of the contract to delivery. Because of the outbreak of New Crown epidemic in the U.S., we completed the delivery of the equipment ahead of schedule and flew it to the U.S.
Celebrate the 10th anniversary of ZUNGWAN intelligent machine
——A letter from ZUNGWAN machine to you
Hello, partners, customers and friends of ZUNGWAN machine!
April 12 is the 10th anniversary of the establishment of ZUNGWAN intelligent machine. I'm 10 years old. From April 12, 2011 when I officially got my birth certificate (business license) to today, I've accompanied my close partners and colleagues through 10 spring, summer, autumn and winter, 10 special birthdays, and cooperated with more than 200 large, medium and small enterprises, companies and factories at home and abroad, It has sold more than 2000 automatic filling and sealing machines, more than 1000 automatic filling and capping machines, more than 3000 semi-automatic filling machines and more than 500 filling and packaging production lines.
My name is Wenzhou ZUNGWAN Intelligent Machine Co., Ltd. now has more than 50 employees. I am a well-known brand enterprise specializing in the R & D, production and sales of hose filling and sealing machine, aluminum tube filling and folding machine, various material filling and capping machine, full-automatic linear filling machine, capping machine, labeling machine, water cream filling and capping machine and other related packaging machinery and equipment supporting products, It has a complete and scientific quality management system. The enterprise integrity, company strength and product quality of ZUNGWAN Intelligent Machine have won the full support, trust and recognition of customers and friends at home and abroad.
Since the establishment of the company in 2011, our main sales and production staff have worked in the packaging machinery industry for more than 5 years. They have rich experience in R & D, production, sales and after-sales of cosmetics, skin care products and drug packaging production equipment. After successfully completing hundreds of enterprise order projects, Further promote our strategic sales of machinery and improve after-sales tracking service. In the next development period of the enterprise, it will participate more in the cooperation with famous brand companies, have a close relationship with cosmetics, skin care products, drugs and food enterprises, and create new brilliance in central machinery design, innovation and breakthrough with more like-minded people.
By combining the production technical strength of both supply and demand sides and using advanced machine professional knowledge, since 2011, we have been engaged in the sales of packaging machinery industry for more than 15 years. The chief engineer of filling and sealing machine production workshop, Potter and director Wu, who has been engaged in quality control for more than 20 years, have combined their own electronic pneumatic professional knowledge and years of technical training to launch various filling and sealing machines and filling capping machines, Plastic molding filling and sealing machine filling and sealing machine, fully meet the production requirements of customers and help customers create benefits; Time and again improve the service life of products and the simplicity of operation, so that the equipment I make is favored by enterprises, companies and factories at home and abroad.
I adhere to the enterprise oriented ideology and policy of "customer-oriented and product-based", so as to realize the integration of industrial chain, provide customers with multiple production engineering schemes, and provide packaging machinery and equipment with stable performance, excellent quality and reasonable price and immediate and thoughtful after-sales service, so as to solve actual production problems for customers with the most sincere attitude, Avoid unnecessary waste of expenses caused by enterprises. Strive to meet customers' purchase intention of value for money and value for money.
ZUNGWAN is the leading manufacturer of perfume and cosmetic filling machines and lines, providing all solutions from the smallest to the fastest machines (400 bpm) for a vast range of applications :
Perfumes (bottles, samples, miniatures), liquid Cosmetics (shampoo, conditioner, lotions, gel, serum, foam bath, liquid soap, shower gel, hair dye, nail varnish, foundation, makeup remover, suntan lotion, deodorant, roll-on, etc.) and Cosmetic creams (jars, lip-gloss, mascara).