











In our production and life, Capping Machine is also called a Capping Machine, Capping Machine, or Capping Machine, which is used for screwing and unscrewing the caps of plastic bottles and glass bottles (molded bottles or tube bottles). equipment. Capping Machine is highly intelligent capping equipment with advanced technology, unique design, and easy operation. During the entire capping process, workers only need to place the cap on the mouth of the bottle, and then the bottle is automatically sent to the capping wheel and automatically tightened to complete the capping operation. The Capping Machine evacuates the packaging bottle and then tightens it, which prolongs the storage time of the packaging, reduces the failure rate of the Capping Machine, and improves the packaging efficiency of the Capping Machine. So what are the matters needing attention when operating Capping Machine correctly? Let's take a look together next.
This is the content list:
l Capping Machine rolling wheel adjustment
l Capping Machine lock wheel adjustment
l Capping Machine cap lock
l Capping Machine height adjustment
Capping Machine rolling wheel adjustment
Place the Capping Machine bottle on the bracket and raise the bracket to the highest point. First, loosen the lock nut to adjust the rolling wheel so that the (sprung) edge of the two Capping Machine rolling wheels is at the threading of the bottle. Click on it, then loosen the lock nut, and then adjust the adjusting screw so that the edges of the two rolling wheels are in contact with the cover, and a little pressure is appropriate, and then tighten the nut.
Capping Machine lock wheel adjustment
Adjust the two Capping Machine locking wheels, first loosen the locking nuts, adjust the locking wheels so that the edges of the two locking wheels are in contact with the lower edge of the bottle cap, a little pressure is appropriate, and then tighten the nuts (Note: Adjust Capping Machine Should be from loose to tight, adjust while pulling the lock).
Capping Machine cap lock
Loosen the top screw, remove the Capping Machine gland head, and then remove the entire Capping Machine lock head, install the appropriate plastic lock head on the cone sleeve, and then adjust the lifting height of the bracket to meet the working requirements.
Capping Machine height adjustment
Start the Capping Machine to lower the bracket to the lowest point, then place the bottle on the bracket, loosen the brake nut, turn the adjusting screw to raise the bracket, and then adjust the appropriate distance between the cap of the Capping Machine and the capping head (generally All are adjusted in place at the factory).
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream/ointment, fluid, and semi-fluid materials. We have obtained ISO9001 quality management system certification, and some products have passed CE certification. Our company has obtained more than 20 invention patents and utility model patents. If you are interested in Capping Machine, you can contact us, our website is www.cnzpack.com.
Wenzhou Zungwan Intelligent Machine Co.,Ltd. is the professional equipment manufacturer to keep researching and developing the packing machinery for every type of liquid, powder, cream/ointment, fluid and half-fluid etc. materials. We have Obtained ISO9001 quality management system authentication and parts of our products have passed CE authentication. Our company has obtained more than 20 invention patents and utility model patents. The main products range from nail polish filling machine, perfume machine,perfume filling machine, powder serial automatically volume-measuring packing machine and inline capping machine, rotary capping machine and labeling machine, bottle unscrambler , screw capping machine ,tube filling and sealing machine, cartoning machine and other Packaging equipments.
So far we have more than 100 domestic customers and more than 400 foreign customers. The quality of our machines and our service as well as our integrity is acclaimed both in China and abroad. we will carry forward the spirit of "integrated innovation, and perseverance," discipline ourselves to be the first, and provide better and more perfect service for our new and old customers with enthusiasm and a new attitude.
In our production and life, the unscrambler has an important influence on us. So what are the types of Bottle Unscrambler? Let's take a look together next.
This is the content list:
l Gravity Bottle Unscrambler
l Water-floating and baffled Bottle Unscrambler
l Friction Bottle Unscrambler
l Centrifugal Bottle Unscrambler
Gravity Bottle Unscrambler
The basic principle of the gravity-centered Bottle Unscrambler is to use the characteristics of the division of the bottle's center of gravity during the finishing process. If the bottle is facing forward, the center of gravity of the Bottle Unscrambler will be close to the bottom of the bottle, so that the bottle will not change its arrangement. If the bottle is reversed, the center of gravity will be at the upper part of the bottle, the center of gravity of the bottle will be unstable, this function is suitable for use in the Bottle Unscrambler, which is a heavy glass bottle.
Water-floating and baffled Bottle Unscrambler
The basic principle of the water-floating and baffled Bottle Unscrambler is to use the buoyancy principle of water in the conveying stage to convey the bottles to the finishing stage. In the Bottle Unscrambler finishing stage, baffle A is used to make the bottles forward. There is a rectangular cavity on the baffle that fits the bottle mouth. When the bottle mouth of the Bottle Unscrambler comes over, the mouth of the bottle will enter the rectangular cavity, so that the bottom of the bottle is lowered first, and the mouth of the bottle is lowered, and the bottle will be output in the forward direction. When the bottom comes over, the baffle does not work, and the Bottle Unscrambler bottle is output in the forward direction.
Friction Bottle Unscrambler
The basic principle of the friction Bottle Unscrambler is to use the friction of the belt to transport the bottles in the finishing stage, and to adjust the bottles by the friction in the finishing stage. Compared with the above two schemes, this scheme has the advantage of high-efficiency Z, and there are no other unnecessary processes, such as cleaning phases. The structure design of the Bottle Unscrambler mainly utilizes the friction of the belt, and the friction type Bottle Unscrambler enables the bottle to flip under high-speed movement, and achieves high efficiency, and improves processing efficiency.
Centrifugal Bottle Unscrambler
The basic principle of the centrifugal Bottle Unscramble is to use the centrifugal force of the disc to bring the bottle close to the outside of the ring, and then use the different characteristics of the bottom and the width of the bottle mouth to turn the bottle mouth downwards. The function of the centrifugal Bottle Unscrambler is to manually add materials to the storage bottle library for storage. The materials in the storage bottle library will be automatically quantified and fed to the turntable at a set speed. The turntable rotates at a high speed to supply the bottles as required. The web wheel the irregular bottles are removed, and the bottle dividing part sends the bottles from the turntable to the bottle unscramble part at a certain speed. The unscrambler part clamps the bottles to the working surface of the conveyor through the conveyor belts on both sides, and at the same time sorts out the bottles through the bottle turning device. It is an indispensable machine for high-speed production to realize fully automated operation, and it saves a lot of labor costs and avoids losses caused by human error factors.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer with good development in the quality of Bottle Unscrambler products. If you are interested in Bottle Unscrambler, you can contact us. Our website is www.cnzpack.com.
Wenzhou Zungwan Intelligent Machine Co.,Ltd. is the professional equipment manufacturer to keep researching and developing the packing machinery for every type of liquid, powder, cream/ointment, fluid and half-fluid etc. materials. We have Obtained ISO9001 quality management system authentication and parts of our products have passed CE authentication. Our company has obtained more than 20 invention patents and utility model patents. The main products range from nail polish filling machine, perfume machine,perfume filling machine, powder serial automatically volume-measuring packing machine and inline capping machine, rotary capping machine and labeling machine, bottle unscrambler , screw capping machine ,tube filling and sealing machine, cartoning machine and other Packaging equipments.
So far we have more than 100 domestic customers and more than 400 foreign customers. The quality of our machines and our service as well as our integrity is acclaimed both in China and abroad. we will carry forward the spirit of "integrated innovation, and perseverance," discipline ourselves to be the first, and provide better and more perfect service for our new and old customers with enthusiasm and a new attitude.
There is already a lot of knowledge about the Labeling Machine in the market, but the Labeling Machine will appear crooked in the process of using it. How should this be solved? Let's take a look together next.
This is the content list:
Reasons for Labeling Machine crooked during use
Labeling Machine appears to "post crooked" solution
Why does Labeling Machine post crookedly during use? There are two factors: one is running in an environment that is not suitable for Labeling Machine work, and the other is the lack of maintenance of Labeling Machine equipment. The round Labeling Machine adopts self-adhesive roll labeling paper, and the labeling adopts the rolling method to complete the labeling process. The self-adhesive Labeling Machine is clean and hygienic, non-mold, beautiful, and firm after labeling, and will not fall off by itself, and production efficiency Higher merits. If you can do both of these things, you can eliminate the problem of inaccurate labeling.
First, stop the Labeling Machine, and then inspect whether the labeling heads on both sides of the Labeling Machine are loose. Use the tools configured by the manufacturer to stabilize the Labeling Machine. Check whether the Labeling Machine wraps the label's trays for looseness or uneven rotation speed. Add engine oil to lubricate. Round bottle Labeling Machine realizes labeling or filming on the circumferential surface of cylindrical and conical products, such as glass bottles, plastic bottles, etc. It can realize circumferential, semicircular, circumferential double-sided, circumferential positioning labeling and other functions, mainly vertical There are two ways of labeling and horizontal labeling. Then inspect the parameters of the Labeling Machine operating system to avoid labeling different products under the same parameters of the Labeling Machine. Finally, adjust the labeling head and place the labeling product separately. When the conveyor belt is conveyed, whether the Labeling Machine shakes or shakes the first two These steps must be performed after the Labeling Machine stops. If the above two cannot solve the labeling problem of the Labeling Machine, please do not disassemble and replace the internal parts of the device privately. You need to transfer the professional to repair the Labeling Machine.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. So far, we have more than 100 domestic customers and more than 400 foreign customers. The quality of our Labeling Machine and service as well as our integrity are widely praised at home and abroad. We will carry forward the spirit of "comprehensive innovation and perseverance", self-discipline and strive for the first place, and provide new and old customers with better and more complete services with enthusiasm and a new attitude. It can be seen that we have developed well in the quality of Labeling Machine products. Labeling Machine's first-class product quality and efficient and fast after-sales service have created excellent products of "Zhonghuan". If you are interested in Labeling Machine, you can contact us, our website is www.cnzpack.com. I look forward to your coming and hope to cooperate with you.
Nowadays, the number and types of Cosmetic Filling machines And Capping Machines on the market are very large. Customers who use the Cosmetic Filling Machine And Capping machine for the first time will inevitably be a little confused when purchasing this equipment and don't know how to buy a cost-effective Cosmetic Filling machine And Capping machine suitable for their factory. Next, let's take a look at how to choose a Cosmetic Filling machine And a Capping Machine. Here are some answers.
l Here is the content list:
l Four purchasing principles for Cosmetic Filling Machine And Capping Machine.
l Precautions for purchasing Cosmetic Filling machine And Capping machine.
Four purchasing principles for Cosmetic Filling Machine And Capping Machine.
First, high-cost performance is the first principle. At present, the quality of the domestically produced Cosmetic Filling Machine And the Capping machine has been greatly improved than before, and it keeps pace with the imported machines. Second, choose as far as possible the famous brand Cosmetic Filling machine And Capping machine company with a long history, and the quality is guaranteed. If you purchase a low-quality Cosmetic Filling Machine And Capping machine, the amount of packaging film that will be wasted over time in daily production is not a small number. Third, if there is an on-site inspection, we must pay attention to the big aspects, but also the small details. The details often determine the quality of the whole machine. Fourth, in terms of after-sales service, we must have a good reputation and prompt after-sales service. For example, in beverage companies, summer is the peak season for production. If there is a problem with the machine during the production process that cannot be solved immediately, there will be a great loss. Wenzhou Zungwan Intelligent Machine Co., Ltd.'s after-sales service is super timely.
Precautions for purchasing Cosmetic Filling machine And Capping machine.
See whether the Cosmetic Filling machine And the Capping machine can meet a variety of bottle types. Many companies will choose to produce products with different packaging specifications and materials. In this case, bottle compatibility is very important. Because the investment in purchasing multiple types of equipment is too large, purchasing a Cosmetic Filling machine And a Capping Machine that can be used in one machine can effectively reduce the investment cost of the equipment.
Purchasing Cosmetic Filling Machine And Capping Machine is a one-time expense, while after-sales service is a daily expense. Many companies care about how much they spend on equipment when purchasing, and they rarely discuss and estimate the cost of after-sales service. This is a common omission in equipment procurement by many companies. When purchasing Cosmetic Filling Machine And a Capping Machine, it is necessary to compare the level of operating cost and comprehensively weigh the purchasing cost. The operating cost of the machine includes energy consumption, the number and quality of operators, the price and replacement frequency of spare parts and wearing parts, the cost of after-sales service engineers, the service life and depreciation of the equipment Rate, etc.
For more questions about Cosmetic Filling machines And Capping Machines, please consult Wenzhou Zungwan Intelligent Machine Co., Ltd. Our official website is https:// www.cnzpack.com/. Years of accumulated experience in the R&D and production industry will provide you with more product services and technical support!
Korea East Asia Pharmaceutical Company, ordered a syrup filling line from our company, from bottle management - bottle washing - filling - corking - capping - labeling, the whole line in the Korean factory to complete the commissioning task, the whole line production design speed of 120 bottles per minute high-speed filling line.
Bottle Unscrambler is suitable for automatic unscramble of plastic round bottles, flat bottles, and tube-top bottles. Disordered bottles are poured into the bottle storage box. The bottles enter the filling machine conveyor line in an upright and orderly manner. The use of the Bottle Unscrambler equipment greatly reduces the labor intensity of the operators, and the equipment is stable and reliable with a high degree of automation. So, what is the structure of Bottle Unscrambler? Let's take a look together next.
This is the content list:
l The lifting mechanism of Bottle Unscrambler
l Bottle Unscrambler's unscrambler mechanism
l Bottle delivery mechanism of Bottle Unscrambler
l Bottle Unscrambler's bottle-out mechanism
The lifting mechanism of Bottle Unscrambler
Bottle Unscrambler has a stainless steel shell, stainless steel support feet, stainless steel large-capacity hopper, no bottle alarm and cap opening function, engineering plastic conveyor belt, which meets GMP requirements.
Bottle Unscrambler Bottle Unscrambler
Bottle Unscrambler adopts automatic quantitative feeding and turntable technology to maintain the dynamic balance of the number of bottles in the unscrambler tray to ensure stable and continuous bottle output. The Bottle Unscrambler enters the Bottle Unscrambler turntable by the lifting mechanism, and the turntable rotates at a high speed to sort out the bottles as required. Bottle Unscrambler web wheel removes irregular bottles.
Bottle delivery mechanism of Bottle Unscrambler
The bottle delivery mechanism of Bottle Unscrambler is a conveyor belt that meets GMP and FDA standards and requirements and uses flexible cushioning to facilitate bottle turnover. The structure of single-motor-driven double-belt pulleys ensures the same speed as the two clamping belts. The bottle-feeding mechanism of the Bottle Unscrambler clamps the bottles to the working surface of the conveyor through the conveyor belts on both sides. The bottle delivery mechanism of Bottle Unscrambler sorts out the bottles through different bottle flippers.
Bottle Unscrambler's bottle-out mechanism
The Bottle Unscrambler's single-motor drive double-pulley structure ensures that the two clamping belts have the same speed. Adjustable clamping belt speed. When the clamping belt sends out the bottle, the speed of the Bottle Unscrambler is the same as that of the main conveyor belt. The Bottle Unscrambler does not invert the bottle. The conveyor belt conforms to GMP and FDA standards and requirements. It adopts flexible buffering and is convenient. The bottle is turned over.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. So far, we have more than 100 domestic customers and more than 400 foreign customers. The quality of our Bottle Unscrambler and service as well as our integrity are widely praised at home and abroad. We will carry forward the spirit of "comprehensive innovation and perseverance", self-discipline and strive for the first place, and provide new and old customers with better and more complete services with enthusiasm and a new attitude. Bottle Unscrambler is in great demand in the domestic and foreign markets. Keep improving, develop to satisfy customers, and meet market needs are our eternal topic and our sincere commitment to customers. If you are interested in Bottle Unscrambler, you can contact us, our website is www.cnzpack.com. We look forward to your coming and hope to cooperate with you.