Automatic Electronic Counting Machine manufacturer- China Manufacturers Suppliers Factory

With the continuous development of our production life, the emergence of Pharmaceutical Filler and Capper has brought great convenience to the industry. So what are the procedures and precautions for Pharmaceutical Filler and Capper? Let's take a look at it.

This is the content list:

l The operation method of Pharmaceutical Filler and Capper

l Safety rules for the use of Pharmaceutical Filler and Capper

l Precautions for Pharmaceutical Filler and Capper

The operation method of Pharmaceutical Filler and Capper

Pharmaceutical Filler and Capper installation precautions before use check, after the machine is installed, turn on the power, test runs the three-phase motor to ensure that the correct direction of operation, ensure that the pressure and flow of compressed air, check whether the motor, bearings, etc. need to be lubricated, no oil-free operation is strictly prohibited, normal before starting Pharmaceutical Filler and Capper. Filler And Capper at the same time, observe whether the fasteners of each part are loose, and only after the operation of each part is stable, can it be used normally. Check whether the function of the safety facilities of Pharmaceutical Filler and Capper is normal, check carefully whether there is water in all water tanks, whether the chainplate is stuck, whether there is debris on the conveyor belt, whether there are caps in the storage box, whether the water, power, and gas sources are connected before starting the machine. After all, conditions are ready, then close the main power QF, power indicator light, fault indicator, emergency stop indicator light is not on, then the start conditions are available, press the start button on the control box and the start switch at the filling, after the buzzer three warning, the whole machine starts running, take external washing, rinsing, filling fully automatic work mode, stop can be at the filling and control box press the stop button after the stop should turn off the main power.

Pharmaceutical Filler and Capper safety rules of use

1. No foreign objects (such as tools, rags, etc.) in Pharmaceutical Filler and Capper equipment.

2. Pharmaceutical Filler and Capper should not be allowed to have abnormal noise, if there is, it should be stopped immediately to check the reason.

3. All protective materials should be safe and reliable, it is strictly prohibited to wear clothing that may be hung by moving parts (such as scarves, bracelets, watches, etc.).

4. Long hair, should wear a hair cover.

5. Do not use water and other liquids to clean the electrical unit.

6. Cleaning should wear work clothes, gloves, glasses, etc., to prevent strong acid, strong alkali corrosion.

7. When Pharmaceutical Filler and Capper is running, someone must monitor it and do not approach the machine with tools or other objects.

8. Don't let the staff who are not related to the operation approach the installation of Pharmaceutical Filler and Capper.

Precautions for Pharmaceutical Filler and Capper

1、After unpacking Pharmaceutical Filler and Capper, first check whether the random technical information is complete and whether the machine is damaged in transportation, to solve the problem in time.

2、Install and adjust the feeding and discharging components according to the shape illustration in this manual.

3、Lubricate each lubrication point with new lubricant.

4、Turn the Pharmaceutical Filler and Capper by shaking the handle, check whether the Pharmaceutical Filler and Capper are running in the correct direction (facing the motor spindle in the counterclockwise direction), and the installation precautions of the Pharmaceutical Filler and Capper must be protected from grounding.

If you are interested in Pharmaceutical Filler and Capper, please contact us, our website is www.cnzpack.com.

Tube Filling machine And Sealing machine adopt the latest module circuit, stable working performance, high efficiency, and all components adopt famous brand products. Under the careful design of our company, various advanced Tube Filling Machine And Sealing machines have been produced. Mainly used for sealing toothpaste, cosmetics, medicine, food, industrial products, and various hoses. Next, let's take a look at the cleaning and maintenance of the Tube Filling machine And Sealing machine. Here are some answers.

Here is the content list:

• Tube Filling machine And Sealing machine cleaning.

• Daily maintenance of Tube Filling machine And Sealing machine.

Tube Filling machine And Sealing machine cleaning.

First, regularly clean the surface of the Tube Filling machine And Sealing machine, the bottom plate and the lower mold slide plate, grooves, the upper mold inner pressure plate, and the positioning rod. Second, grease should be added to the transmission parts of the lower mold slide plate, pressing rod bearing, eccentric wheel and guidepost, guide rail, and so on regularly to ensure the performance of the Tube Filling Machine And Sealing machine. Third, the method of cleaning the toothed knife: first plug the two drain holes of the lower mold with a cotton ball, pour boiling water into the groove of the lower mold, until it is full, then push the slide of the lower mold into place, and lower the upper mold. Press to the lowest point, let the toothed knife soak for a few minutes until it is clean, repeat several times.

Daily maintenance of Tube Filling machine And Sealing machine.

First, check the equipment ground wire frequently to ensure reliable contact; clean the weighing platform frequently; check whether the pneumatic pipeline is leaking and whether the air pipe is broken. Second, change the lubricating oil of the reducer motor every year, check the tightness of the chain, and adjust the tension in time. Third, the sensor of the Tube Filling Machine And Sealing machine is a high-precision, high-sealing, and high-sensitivity device. Impact and overload are strictly prohibited, and no contact is allowed during the working process, and it is not allowed to be disassembled if it is not required for maintenance. Fourth, if it is not used for a long time, empty the material in the pipeline. Fifth, observe the moisture filter and oil mist device of the pneumatic combination two-piece before going to work every day. Sixth, during the production, we should always patrol and observe the mechanical parts to see if the rotation and lifting are normal if there is any abnormality, and if the screws are loose. Seventh, do a good job of cleaning and sanitation, keep the surface of the Tube Filling machine And Sealing machine clean, often remove the accumulation on the scale body, and pay attention to keeping the electric control cabinet clean.

Wenzhou Zungwan Intelligent Machine Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream, ointment, fluid, and semi-fluid materials. If you are engaged in work related to Tube Filling machine And Sealing machine or want to know more about our company, you can contact us. Our official website is https:// www.cnzpack.com/.

Cosmetic Filling Machine And Capping machine is very simple and convenient in operation, accuracy error, installation adjustment, equipment cleaning, maintenance, etc. Next, let’s take a look at the introduction of the Cosmetic Filling machine And Capping machine. Here are some answers.

Here is the content list:

l Information about Cosmetic Filling machine And Capping machine.

l Attention to the installation of Cosmetic Filling machine And Capping machine.

l What are the safety rules of Cosmetic Filling machines And Capping machines?

Information about Cosmetic Filling machine And Capping machine.

The Cosmetic Filling machine And Capping machine integrates light, machine, electricity, and pneumatics, with a high degree of automation, high yield, wide adaptability, and good stability. The Cosmetic Filling machine And Capping machine adopts PLC control, which is easy to operate and easy to adjust. Due to its high technical content and good quality, it is an ideal piece of equipment for perfume manufacturers! Cosmetic Filling Machine And Capping machine is mainly suitable for different material specifications and different specifications of caps, screw (rolling) caps. The structure is compact and reasonable, and it can be easily linked with other equipment into a line. The dust cover can be purchased. The machine is of linear design and the assembly line is convenient and beautiful.

Attention to the installation of Cosmetic Filling machine And Capping machine.

First, after unpacking the Cosmetic Filling machine And Capping machine, first check whether the random technical information is complete and whether the machine is damaged during transportation, to solve it in time. Second, install and adjust the feeding component and the discharging component according to the outline diagram in this manual. Third, add new lubricating oil to each lubrication point. Fourth, use the crank handle to turn the machine to check whether the Cosmetic Filling machine And Capping Machine is running in the correct direction, and the machine must be grounded.

What are the safety rules of Cosmetic Filling machines And Capping machines?

First, check the Cosmetic Filling machine And Capping machine equipment for foreign matter, such as residual liquid material or other stones, iron pieces, and other garbage, and clean it up in time. Second, do not clean the motor with water or other liquids. Third, you cannot use tools or other irrelevant things to contact the Cosmetic Filling Machine And Capping Machine. Fourth, wear gloves, glasses, and work clothes when cleaning the machine. Non-professional operators cannot approach the Cosmetic Filling machine And Capping Machine.

Wenzhou Zongwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer that continuously develops various liquid, powder, cream, ointment, fluid, and semi-fluid material packaging machinery. If you are engaged in work related to Cosmetic Filling machines And Capping machines or want to learn more about our company, you can communicate with us on the website. Our official website is https:// www.cnzpack.com/. Our company adheres to the corporate culture of "quality first, customer first", and has always made unremitting efforts to become a professional supplier of Cosmetic Filling machines And Capping machines in the industry.

Wenzhou Zungwan Intelligent Machine Co.,Ltd. is the professional equipment manufacturer to keep researching and developing the packing machinery for every type of liquid, powder, cream/ointment, fluid and half-fluid etc. materials. We have Obtained ISO9001 quality management system authentication and parts of our products have passed CE authentication. Our company has obtained more than 20 invention patents and utility model patents. The main products range from nail polish filling machine, perfume machine,perfume filling machine, powder serial automatically volume-measuring packing machine and inline capping machine, rotary capping machine and labeling machine, bottle unscrambler , screw capping machine ,tube filling and sealing machine, cartoning machine and other Packaging equipments.

So far we have more than 100 domestic customers and more than 400 foreign customers. The quality of our machines and our service as well as our integrity is acclaimed both in China and abroad. we will carry forward the spirit of "integrated innovation, and perseverance," discipline ourselves to be the first, and provide better and more perfect service for our new and old customers with enthusiasm and a new attitude.

They ordered two hand sanitizer filling lines, requiring a speed of 150 bottles per minute, from automatic bottle management - automatic filling - automatic cap management - automatic capping - automatic labeling.

The whole production line was designed, developed and produced by our company, and it took 70 days from the finalization of the contract to delivery. Because of the outbreak of New Crown epidemic in the U.S., we completed the delivery of the equipment ahead of schedule and flew it to the U.S.

In our production and life, Capping Machine is also called a Capping Machine, Capping Machine, or Capping Machine, which is used for screwing and unscrewing the caps of plastic bottles and glass bottles (molded bottles or tube bottles). equipment. Capping Machine is highly intelligent capping equipment with advanced technology, unique design, and easy operation. During the entire capping process, workers only need to place the cap on the mouth of the bottle, and then the bottle is automatically sent to the capping wheel and automatically tightened to complete the capping operation. The Capping Machine evacuates the packaging bottle and then tightens it, which prolongs the storage time of the packaging, reduces the failure rate of the Capping Machine, and improves the packaging efficiency of the Capping Machine. So what are the matters needing attention when operating Capping Machine correctly? Let's take a look together next.

This is the content list:

l Capping Machine rolling wheel adjustment

l Capping Machine lock wheel adjustment

l Capping Machine cap lock

l Capping Machine height adjustment

Capping Machine rolling wheel adjustment

Place the Capping Machine bottle on the bracket and raise the bracket to the highest point. First, loosen the lock nut to adjust the rolling wheel so that the (sprung) edge of the two Capping Machine rolling wheels is at the threading of the bottle. Click on it, then loosen the lock nut, and then adjust the adjusting screw so that the edges of the two rolling wheels are in contact with the cover, and a little pressure is appropriate, and then tighten the nut.

Capping Machine lock wheel adjustment

Adjust the two Capping Machine locking wheels, first loosen the locking nuts, adjust the locking wheels so that the edges of the two locking wheels are in contact with the lower edge of the bottle cap, a little pressure is appropriate, and then tighten the nuts (Note: Adjust Capping Machine Should be from loose to tight, adjust while pulling the lock).

Capping Machine cap lock

Loosen the top screw, remove the Capping Machine gland head, and then remove the entire Capping Machine lock head, install the appropriate plastic lock head on the cone sleeve, and then adjust the lifting height of the bracket to meet the working requirements.

Capping Machine height adjustment

Start the Capping Machine to lower the bracket to the lowest point, then place the bottle on the bracket, loosen the brake nut, turn the adjusting screw to raise the bracket, and then adjust the appropriate distance between the cap of the Capping Machine and the capping head (generally All are adjusted in place at the factory).

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream/ointment, fluid, and semi-fluid materials. We have obtained ISO9001 quality management system certification, and some products have passed CE certification. Our company has obtained more than 20 invention patents and utility model patents. If you are interested in Capping Machine, you can contact us, our website is www.cnzpack.com.

Celebrate the 10th anniversary of ZUNGWAN intelligent machine

——A letter from ZUNGWAN machine to you

Hello, partners, customers and friends of ZUNGWAN machine!

April 12 is the 10th anniversary of the establishment of ZUNGWAN intelligent machine. I'm 10 years old. From April 12, 2011 when I officially got my birth certificate (business license) to today, I've accompanied my close partners and colleagues through 10 spring, summer, autumn and winter, 10 special birthdays, and cooperated with more than 200 large, medium and small enterprises, companies and factories at home and abroad, It has sold more than 2000 automatic filling and sealing machines, more than 1000 automatic filling and capping machines, more than 3000 semi-automatic filling machines and more than 500 filling and packaging production lines.

My name is Wenzhou ZUNGWAN Intelligent Machine Co., Ltd. now has more than 50 employees. I am a well-known brand enterprise specializing in the R & D, production and sales of hose filling and sealing machine, aluminum tube filling and folding machine, various material filling and capping machine, full-automatic linear filling machine, capping machine, labeling machine, water cream filling and capping machine and other related packaging machinery and equipment supporting products, It has a complete and scientific quality management system. The enterprise integrity, company strength and product quality of ZUNGWAN Intelligent Machine have won the full support, trust and recognition of customers and friends at home and abroad.

Since the establishment of the company in 2011, our main sales and production staff have worked in the packaging machinery industry for more than 5 years. They have rich experience in R & D, production, sales and after-sales of cosmetics, skin care products and drug packaging production equipment. After successfully completing hundreds of enterprise order projects, Further promote our strategic sales of machinery and improve after-sales tracking service. In the next development period of the enterprise, it will participate more in the cooperation with famous brand companies, have a close relationship with cosmetics, skin care products, drugs and food enterprises, and create new brilliance in central machinery design, innovation and breakthrough with more like-minded people.

By combining the production technical strength of both supply and demand sides and using advanced machine professional knowledge, since 2011, we have been engaged in the sales of packaging machinery industry for more than 15 years. The chief engineer of filling and sealing machine production workshop, Potter and director Wu, who has been engaged in quality control for more than 20 years, have combined their own electronic pneumatic professional knowledge and years of technical training to launch various filling and sealing machines and filling capping machines, Plastic molding filling and sealing machine filling and sealing machine, fully meet the production requirements of customers and help customers create benefits; Time and again improve the service life of products and the simplicity of operation, so that the equipment I make is favored by enterprises, companies and factories at home and abroad.

I adhere to the enterprise oriented ideology and policy of "customer-oriented and product-based", so as to realize the integration of industrial chain, provide customers with multiple production engineering schemes, and provide packaging machinery and equipment with stable performance, excellent quality and reasonable price and immediate and thoughtful after-sales service, so as to solve actual production problems for customers with the most sincere attitude, Avoid unnecessary waste of expenses caused by enterprises. Strive to meet customers' purchase intention of value for money and value for money.

Liquid Filling Machine is used in the beverage, drinking water, and liquor industries and has become a very important equipment in the liquid food industry. function. So what are the main structural designs of Liquid Filling Machine? Let's take a look at it together.

This is the content list:

l The transmission system of Liquid Filling Machine

l Liquid Filling Machine's actuator

l Liquid Filling Machine's control system

l The body part of the Liquid Filling Machine

The transmission system of Liquid Filling Machine

Liquid Filling Machine's transmission system, this part is to transmit power and motion to various actuators, control elements, and auxiliary mechanisms. Liquid Filling Machine's main transmission components include gears, sprockets, worm gears, screws, and nuts, etc.

Liquid Filling Machine's actuator

Liquid Filling Machine's actuator, this part is mainly to achieve the Liquid Filling Machine packaging process operation and auxiliary operation part, packaging process operation refers to filling, auxiliary operation part refers to packaging materials and products supply and delivery, Liquid Filling Machine packaging material output, etc., the actuator is the core of the machine, its action sequence, and movement law according to the process principle and requirements.

Liquid Filling Machine's control system

The control system of the Liquid Filling Machine is to control the relevant parts of the Liquid Filling Machine, allocate the movements to the actuators, and make them coordinate the movements according to the time and sequence, thus realizing the process functions of the Liquid Filling Machine.

The body part of the Liquid Filling Machine

The body of the Liquid Filling Machine is the skeleton of the Liquid Filling Machine, which mainly plays the role of supporting and positioning the parts. The stability of the body is the first consideration in the design, and the center of gravity of the Liquid Filling Machine should be lowered as much as possible to make the Liquid Filling Machine work smoothly.

The mainframe of Liquid Filling Machine is to fix and support all the working actuators, transmission parts, control systems, to ensure their relative position correctness and stability. The vacuum system of the Liquid Filling Machine sucks the air out of the bottle, thus generating negative pressure inside the bottle, the liquid is filled into the bottle from the liquid tank through the liquid supply system and the filling head, when the liquid reaches the required liquid level, the inlet port is closed and the suction port sucks the excess liquid and foam away.

Liquid Filling Machine of Wenzhou Zungwan Intelligent Machinery Co., Ltd. is first-class product quality and efficient and fast after-sales service, which has created the excellent products of "Zhonghuan". To meet the market demand of Liquid Filling Machine is our eternal topic and sincere commitment to our customers. If you are interested in Liquid Filling Machine, please contact us, our website is www.cnzpack.com. We will carry forward the spirit of "comprehensive innovation, perseverance", self-discipline and strive to be the first, with enthusiasm, new attitude to provide new and old customers with more perfect service. We are looking forward to cooperating with you.

Multi lane vertical coffee powder back sealing sachet bag packing machine CX-280 Multi lane …

Ultrasonic tube filling and sealing machine adopts newest module circuit, working performance is stable, the efficient is high, and all the components adopt famous brand. Under our company’s elaborate designing, we have produced various advanced ultrasonic series products. And mainly used for toothpaste, cosmetics, medicine, food, in dustrial ...

It is used to produce high-quality lipstick and other hot filling new products, such as hip ointment and cosmic pencil. In order to drill more accurately, it uses a servo piston. It uses the maltiple flling model to better fill, and the filling mold uses the automatic circulation system. In order to improve the product quality, the regeneration function is used after filling.

Automatic Bottle Washing-filling-capping Machine

The dynamic Accu-Feed 110 Stick Tubing and Wire Feeder provides high speed, precise stick feeding of wire, metal and plastic tubing and metal rods for medical applications. Learn More …

After-sales Service: Online Service; Warranty: One Year; Automatic Grade: Manual; Applicable Industry: Food Clothing Chemical Industry Home Textiles Dail; Application ...

Labeling Machine> Contact Supplier 1/6 ZONESUN ZS-50 Manual Mineral WaterPlastic Round BottleLabelingMachineFor Round BottlesSticker LabelPacking Machine Ready to Ship

Haven't found the right supplier yet ? Buying Request Hub. 1 request,multiple quotations 1-click quotation comparison OEM,ODM