In our production and life, Capping Machine is also called a Capping Machine, Capping Machine, or Capping Machine, which is used for screwing and unscrewing the caps of plastic bottles and glass bottles (molded bottles or tube bottles). equipment. Capping Machine is highly intelligent capping equipment with advanced technology, unique design, and easy operation. During the entire capping process, workers only need to place the cap on the mouth of the bottle, and then the bottle is automatically sent to the capping wheel and automatically tightened to complete the capping operation. The Capping Machine evacuates the packaging bottle and then tightens it, which prolongs the storage time of the packaging, reduces the failure rate of the Capping Machine, and improves the packaging efficiency of the Capping Machine. So what are the matters needing attention when operating Capping Machine correctly? Let's take a look together next.
This is the content list:
l Capping Machine rolling wheel adjustment
l Capping Machine lock wheel adjustment
l Capping Machine cap lock
l Capping Machine height adjustment
Capping Machine rolling wheel adjustment
Place the Capping Machine bottle on the bracket and raise the bracket to the highest point. First, loosen the lock nut to adjust the rolling wheel so that the (sprung) edge of the two Capping Machine rolling wheels is at the threading of the bottle. Click on it, then loosen the lock nut, and then adjust the adjusting screw so that the edges of the two rolling wheels are in contact with the cover, and a little pressure is appropriate, and then tighten the nut.
Capping Machine lock wheel adjustment
Adjust the two Capping Machine locking wheels, first loosen the locking nuts, adjust the locking wheels so that the edges of the two locking wheels are in contact with the lower edge of the bottle cap, a little pressure is appropriate, and then tighten the nuts (Note: Adjust Capping Machine Should be from loose to tight, adjust while pulling the lock).
Capping Machine cap lock
Loosen the top screw, remove the Capping Machine gland head, and then remove the entire Capping Machine lock head, install the appropriate plastic lock head on the cone sleeve, and then adjust the lifting height of the bracket to meet the working requirements.
Capping Machine height adjustment
Start the Capping Machine to lower the bracket to the lowest point, then place the bottle on the bracket, loosen the brake nut, turn the adjusting screw to raise the bracket, and then adjust the appropriate distance between the cap of the Capping Machine and the capping head (generally All are adjusted in place at the factory).
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream/ointment, fluid, and semi-fluid materials. We have obtained ISO9001 quality management system certification, and some products have passed CE certification. Our company has obtained more than 20 invention patents and utility model patents. If you are interested in Capping Machine, you can contact us, our website is www.cnzpack.com.
Bottle Unscrambler scientific maintenance and daily management institutionalization are very important. Scientific maintenance and the establishment of a daily management and use system have a very important role and significance for the actual use of mechanical products. It improves the standardization and performance of daily maintenance. It is more convenient for people to choose, especially it can be better suited to play the role of mechanical products in actual production. It is necessary to carry out reasonable maintenance and management of Bottle Unscrambler to improve the performance advantages of the product itself and let Bottle Unscrambler can help production in time during operation. So what are the precautions for Bottle Unscrambler? Let's take a look together next.
This is the content list:
l Things to do when installing Bottle Unscrambler
l Precautions when using Bottle Unscrambler
l Matters needing attention when cleaning the automatic Bottle Unscrambler
Things to do when installing Bottle Unscrambler
1. Before installing the Bottle Unscrambler, we need to check the Bottle Unscrambler thoroughly to see if the materials are complete and whether it is damaged. If you find a problem, please communicate with the manufacturer in time to solve it.
2. After checking the completion of the Bottle Unscrambler, follow the installation instructions to assemble the Bottle Unscrambler and adjust accordingly. Then add lubricating oil to the place that needs lubrication to ensure the flexibility of the Bottle Unscrambler.
3. After the test run Bottle Unscrambler, if it runs normally, it means that the installation of Bottle Unscrambler is completed.
Precautions when using Bottle Unscrambler
1. According to Bottle Unscrambler production conditions, choose to use a power supply that meets Bottle Unscrambler specifications.
2. To prevent electric shock, the Bottle Unscrambler must be well-grounded. Please equip the Bottle Unscrambler with a power socket with a ground wire.
3. After turning off the Bottle Unscrambler power switch, there is still strong voltage in some circuits in the electrical control of the machine. If the control circuit needs to be repaired, the power cord must be unplugged to avoid electric shock.
Matters needing attention when cleaning the automatic Bottle Unscrambler
1. If the company needs to disassemble and wash the Bottle Unscrambler, please do not turn off the air source and power supply.
2. Avoid electric shock to Bottle Unscrambler. When disassembling the Bottle Unscrambler, do not directly rinse the body with water, because the Bottle Unscrambler is equipped with electrical control components. If the components contact the water source, there is a risk of electric shock and may damage the Bottle Unscrambler components.
3. It is strictly forbidden to show the residues of the filled items on the Bottle Unscrambler, such as oil stains, paints, etc. The existence of these things will accelerate the corrosion of the Bottle Unscrambler and affect its service life. If any residual items are found, they should be cleaned up in time.
4. Lubricate the Bottle Unscrambler regularly, clean the Bottle Unscrambler every once in a while, and make a cleaning record for later review.
We have obtained ISO9001 quality management system certification, and some products have passed CE certification. The production of Bottle Unscrambler is strictly controlled. If you are interested in Bottle Unscrambler, you can contact us. Our website is www.cnzpack.com.
The Tube Filling machine And Sealing machine, as its name implies, is a machine that can be filled and sealed. There are different models for different industries. The more commonly used industries are chemicals, food, etc. Next, let's take a look at the introduction of the Tube Filling machine And Sealing machine. Here are some answers.
Here is the content list:
l Basic information of Tube Filling machine And Sealing machine
l Application performance of Tube Filling machine And Sealing machine.
l The main characteristics of the Tube Filling machine And Sealing machine.
Basic information of Tube Filling machine And Sealing machine
Tube Filling machine And Sealing machine adopts closed and semi-closed filling pastes and liquids. The seal has no leakage. The filling weight and volume are consistent. Filling, sealing, and printing can be completed at one time. It is suitable for medicine, daily chemicals, and food. Chemical and other fields of product packaging. Such as: filling and sealing of materials such as piping, ointment, hair dye, toothpaste, shoe polish, adhesive, AB glue, epoxy glue, neoprene, and other materials. Tube Filling machine And Sealing machine is an ideal, practical, and economical filling equipment for pharmaceutical, daily chemical, fine chemical, and other industries.
Application performance of Tube Filling machine And Sealing machine.
First, the transmission part of the Tube Filling machine And Sealing machine is enclosed under the platform, which is safe, reliable, and pollution-free. Second, the filling and sealing part is installed in a semi-closed non-static outer frame visible cover above the platform, which is easy to observe, operate and maintain. PLC control, man-machine dialogue interface. The rotary table is driven by a cam, with fast speed and high precision. Third, in the inclined-hung tube warehouse, the upper tube mechanism is equipped with a vacuum adsorption device, to ensure that the automatic upper tube accurately enters the tube seat. The photoelectric benchmarking workstation uses high-precision probes, stepping motors, etc. To control the hose pattern in the correct position. Fourth, the filling nozzle of the Tube Filling Machine And Sealing machine is equipped with a material cut-off mechanism to ensure the filling quality. No tube no filling. Fifth, the tail sealing adopts internal heating at the end of the tube, and external cooling and cooling devices; the typing workstation automatically prints the word code on the position required by the process. Sixth, fault protection alarm, no tube alarm, door open shutdown, overload shutdown; counting, and quantitative shutdown.
The main characteristics of the Tube Filling machine And Sealing machine.
First, the Tube Filling machine And Sealing machine has a compact design, easy to operate and adjust. Second, the driving part is fully enclosed. Third. The Tube Filling Machine And Sealing machine is a pneumatic tube washing and feeding machine with an intelligent temperature control cooling system. Fourth, the 316L stainless steel contacts comply with GMP standards. Fifth, the Tube Filling machine And Sealing machine provides overload protection. Sixth, the safety interlock is closed when the door is opened. Seventh, the automated workflow from tube installation to finished product output. Eighth, photoelectric induction automatic orientation.
If you want to buy Tube Filling machine And Sealing machine or want to know more about our company, you can communicate with us on the website. Our official website is http:// www.cnzpack.com/.
The Pharmaceutical Filler and Capper is no stranger to the health care industry, after all, it has a major impact on it. Pharmaceutical Filler and Capper can specially package various products to ensure that they can be sold properly in the market. The Pharmaceutical Filler and Capper is no longer the traditional equipment that people know, but a smarter and more efficient one. So how does the new generation of Pharmaceutical Filler and Capper work? Let's take a look together.
This is the content list:
l Highlights of Pharmaceutical Filler and Capper
l Performance of the Pharmaceutical Filler and Capper
Highlights of Pharmaceutical Filler and Capper
First of all, the Pharmaceutical Filler and Capper are categorized so that they can provide the right equipment for the different needs of the pharmaceutical industry. Pharmaceutical Filler and Capper are divided into quantitative and fully automatic, both of which are very popular. Pharmaceutical Filler and Capper have an advanced control system, accurate filling quantity, reliable performance, and beautiful appearance, which is ideal for freeze-dried preparation, liquid preparation, and blood products. Pharmaceutical Filler and Capper are suitable for matching with the linkage production line. The filling volume is controlled by a computer, the filling accuracy of the peristaltic pump is high, the range of adjusting dose is large, and it is suitable for various viscosities. Pharmaceutical Filler and Capper's filling needle does not come into contact with the drug and is free of contamination. Peristaltic pump filling system is easy to clean and disinfect. No bottle is not filled, no bottle automatically stops and the bottle collapses. Pharmaceutical Filler and Capper automatically display and counts. A filling system with shrinkage function, no drip. Equipped with Mitsubishi frequency conversion mechanism. Variable frequency speed regulation. The whole machine is designed according to GMP requirements. The equipment tends to be intelligent to make the filling process easier.
Performance of Pharmaceutical Filler and Capper
Pharmaceutical Filler and Capper's performance is good on the one hand, Pharmaceutical Filler and Capper have a wide range of use, can have a certain degree of fluidity of the powder-like, granular materials for reasonable packaging. The Pharmaceutical Filler and Capper can automatically track and correct the error caused by the change of material specific gravity and material level by photoelectric switch control. Pharmaceutical Filler and Capper are simple in design, made of stainless steel, easy to clean, and more convenient for users to use.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer, the quality of our Pharmaceutical Filler and Capper and services and our integrity is widely praised at home and abroad, we have obtained ISO9001 quality management system certification, and some of our products have passed CE certification. Wenzhou Zongwan Intelligent Machinery Co., Ltd. has obtained more than 20 invention patents and utility model patents. If you are interested in Pharmaceutical Filler and Capper, you can contact us at www.cnzpack.com. We are looking forward to your visit and hope to cooperate with you.
As people are enjoying life more and more now, most of the manual labor has been replaced. It is machine consumption. Mechanized operations not only restrict our hands, but more importantly, machine consumption is more efficient than our manual work. It is not only a little bit higher but also more hygiene, which has many benefits. Cartoning Machine is one such automated equipment. So, what are the feed inlets and characteristics of the Cartoning Machine? Let's go take a look next.
This is the content list:
l The feed inlet of the Cartoning Machine
l Features of Cartoning Machine
The feed inlet of the Cartoning Machine
Cartoning Machine feed is generally divided into three entrances: manual entrance, medicine bottle entrance, and machine package box entrance. The entire process of the Cartoning Machine from the machine package box feeding to the final packaging molding can be roughly divided into four stages: the carton is fixed by a guide rail and a push plate is used to open the carton. At the same time, there will be two cards that can move forward. The position is raised from below, jamming the sides of the carton from front to back, so that the box opens at a right angle and moves forward to the loading area.
After filling in the Cartoning Machine loading area, the mechanism of the machine folds the ears into the left and right guide rails and then performs the lid closing action. The front mechanism of the Cartoning Machine will first bend the tongue of the carton, and then a push plate pushes the lid to bend so that the tongue is inserted into the box and the lock is fastened. The closing action of the Cartoning Machine is critical, and the quality of the completion has a lot to do with the structure of the carton and the accuracy of the machine adjustment.
Features of the cartooning machine
1. Cartoning Machine has a low cost. Cartoning Machines can continue to work 24 hours a day. As long as the regular maintenance work is done, it can continue to produce as much as possible, and the production line only needs one or two people to take care of it, which effectively saves labor costs. Moreover, since the work of the Cartoning Machine is mass production, the products produced are more up to the standard with small differences. In addition to the high labor costs and individual differences in products, manual packaging is also affected by the emotions of workers.
2. Cartoning Machine has high production efficiency. The Cartoning Machine takes a fixed amount of time to complete a piece of cartooning work. In a fixed period, the total amount of products that can be completed is also fixed, and it will not be fluctuating. For enterprises, it is easier to calculate and control the cost. In addition, the Cartoning Machine has a fixed time to complete a piece of boxing work, and its efficiency is relatively improved. It can reduce the pressure on the staff in related positions, better manage, make the work orderly, and create more profits for the enterprise. many.
3. The Cartoning Machine has a high safety factor. Manual cartooning is unavoidable for negligence and fatigue, and accidents are prone to work accidents. The Cartoning Machine is used throughout the machine, with high accuracy of repeated operations, good stability, and strong safety. It can effectively prevent injuries to workers. Contribute to the safe and civilized production of enterprises.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It has a lot of experience in the production of cartooning machines. A large number of tests have been carried out before the Cartoning Machine leaves the factory to ensure the quality of the Cartoning Machine. If you are interested, you can contact us, our website is www.cnzpack.com.
The Cosmetic Filling Machine and Capping machine is a professional cosmetic filling and capping equipment, which can make the cap tighter without damaging the mouth of the bottle and effectively protect the cosmetics from contact with the outside world. Next, let's take a look at the use and maintenance of the Cosmetic Filling machine and the capping machine. Here are some answers.
Here is the content list:
l Instructions for use of Cosmetic Filling machine And Capping machine.
l How is the daily maintenance of the Cosmetic Filling machine And Capping machine?
Instructions for use of Cosmetic Filling machine And Capping machine.
First, because the Cosmetic Filling Machine and Capping machine is an automated machine, the dimensions of the pop-up bottle, bottle liner, and bottle cap are required to be uniform. Second, before driving, you must first use the crank handle to turn the machine to see if there is any abnormality in the rotation, and then you can drive after it is confirmed that it is normal. Third, when adjusting the machine, the tools should be used appropriately. It is strictly forbidden to use excessive tools or excessive force to dismantle the parts to avoid damage to the machine parts or affect the performance of the machine. Fourth, the Cosmetic Filling machine and the Capping machine must be kept clean. Before the shift, all parts of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department. It should be scrubbed once a week, especially the areas that are not easily cleaned in normal use or blown with compressed air.
How is the daily maintenance of the Cosmetic Filling machine And Capping machine?
First, the Cosmetic Filling Machine and the Capping machine has strict requirements for the placement environment and must ensure the indoor humidity is moderate, ventilated, and hygienic. Because the Cosmetic Filling Machine and Capping machine is a mechanical device, after all, the raw materials are some steel electromechanical, etc. It is easy to rust when placed in a humid environment, and a closed environment is not conducive to the heat dissipation of the equipment during operation. Second, you must ensure that the power supply is normal and the grounding wire is safe before use. Voltage instability can cause considerable damage to the machine. Third, the non-woven soft cloth and cleaning agent must be added to wipe off the oil or dirt and wipe dry before the Cosmetic Filling machine and capping machine are operated. After use, take out all the remaining materials to prevent the materials from corroding the equipment and scrub them clean. Periodically clean the invisible dust and garbage in the chassis. And adhere to the tightness of the mechanical parts. Fourth, clean up the machine regularly. Many companies conduct major maintenance on machinery and equipment once a year in autumn. Fifth, add lubricating oil to the mechanical components of the Cosmetic Filling machine and Capping machine regularly to reduce frictional resistance and make the machine run faster.
Our official website is https:// www.cnzpack.com/. If you are engaged in work related to Cosmetic Filling machines and Capping machines or want to learn more about our company, you can communicate with us on the website.
In our production and life, the Cartoning Machine is of great significance to us, but sometimes, the Cartoning Machine will fail, so what is the reason for the failure of the Cartoning Machine? Next, let us analyze it together.
This is the content list:
Stop or stop between conveyor belts
The carton cannot be sucked down
The carton is not formed or ejected at the mouth of the box feeding template after being sucked
Can't suck the instructions
The paper rebounds during the suction process of the manual
The manual does not fold well
Uneven folding of the manual
There are curls and creases after the manual is folded
Manual stuck in the fence
1. Cartoning Machine shuts down at intervals to check if there is a shortage of materials and automatically starts up when supplemented.
2. Shut down the Cartoning Machine to check whether the power supply including the power supply part, the motor, or the governor is normal.
1. Whether the cartons of Cartons Machine are arranged neatly.
2. Whether the cartons of the Cartoning Machine are pasted together.
3. Whether the air pressure of the Cartoning Machine suction head is normal.
1. Check if the cartons of Cartons Machine are too hard.
2. Check whether the position of the guide rod of the cartons placed by the Cartoning Machine and the box delivery template are not correct.
3. Check whether the small hook spring at the rear of the Cartoning Machine delivery template is deformed.
4. Check if the height of the suction head of the Cartoning Machine and the box delivery track is correct.
1. Whether the Cartoning Machine manual is deformed, causing the suction head to fail to suck.
2. Whether the suction head gas of the Cartoning Machine is parallel to the manual.
3. Whether the paper width of the Cartoning Machine manual is different, the error must be within 1mm. The stacking position of the manual should be adjusted to a difference of 0.5mm from the inner edge when the suction head rises to the high position.
4. The small paper-separating hook above the suction head of the Cartoning Machine origami moves too early. Generally, the small hook should be inserted into the gap between the paper and the paper before the suction head is about to drop. The height of the small hook is adjusted to be 0.5mm away from the suction head when it is in the high position.
1. The foot-lifting action of the Cartoning Machine's manual was too early, and the manual was taken away by the foot support before being pulled down. The position of the feet of the Cartoning Machine is so that it does not touch the sucked manual when it is returned and it returns to the high position when the paper picking notch wheel has not pulled the paper.
2. Whether the matching speed of the Cartoning Machine suction head and paper picking wheel is the same. The suction head of the Cartoning Machine should be lowered first, and then the front part of the paper picking notch wheel should be pressed onto the paper.
1. Check if the Cartoning Machine paper is deformed and bent, and if there are burrs.
2. Is there any foreign matter in the fence of the Cartoning Machine blocking the paper?
3. The gap between the opening of the Cartoning Machine fence and the folding stick is too large, causing the paper to come out.
4. Is the gap between Cartons Machine's folding sticks too large to hold the paper? Adjust the adjusting screws at both ends of the folding stick to reduce the gap. If the Cartoning Machine folding stick has been used for too long and worn out, the folding stick must be replaced.
Check the Cartoning Machine to adjust the front and rear positions of the barriers in the fence to achieve the required folding size.
1. Is the gap between the Cartoning Machine baffle and the folding stick too large? Adjust the middle position of the baffle and folding stick.
2. If the middle position of the Cartoning Machine baffle and the folding stick has been adjusted, and there is still a large gap, remove the positioning pins on the Cartoning Machine baffle and re-adjust until the gap does not feed paper.
1. Whether the paper feeding gap of Cartoning Machine folding stick is too large and paper feeding is weak. The adjustment method is the same as above.
2. The installation position of the lower half of the Cartoning Machine fence is too long than the arc guide plate on it so that the paper cannot enter the folding stick below. Loosen all the fixing screws on the Cartoning Machine fence and adjust the board backward, but it should not be shorter than the upper guide plate and should be 1-3 mm longer than the guide plate. If it is shorter than the guide plate, the Cartoning Machine manual may go directly into the folding stick below without folding.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It will conduct a large number of tests before the Cartoning Machine leaves the factory to reduce the failure of the Cartoning Machine and provide warranty services. If you are interested in the Cartoning Machine, you can contact us Contact, our website is www.cnzpack.com.
With the continuous development of our production life, the emergence of Pharmaceutical Filler and Capper has brought great convenience to the industry. So what are the procedures and precautions for Pharmaceutical Filler and Capper? Let's take a look at it.
This is the content list:
l The operation method of Pharmaceutical Filler and Capper
l Safety rules for the use of Pharmaceutical Filler and Capper
l Precautions for Pharmaceutical Filler and Capper
The operation method of Pharmaceutical Filler and Capper
Pharmaceutical Filler and Capper installation precautions before use check, after the machine is installed, turn on the power, test runs the three-phase motor to ensure that the correct direction of operation, ensure that the pressure and flow of compressed air, check whether the motor, bearings, etc. need to be lubricated, no oil-free operation is strictly prohibited, normal before starting Pharmaceutical Filler and Capper. Filler And Capper at the same time, observe whether the fasteners of each part are loose, and only after the operation of each part is stable, can it be used normally. Check whether the function of the safety facilities of Pharmaceutical Filler and Capper is normal, check carefully whether there is water in all water tanks, whether the chainplate is stuck, whether there is debris on the conveyor belt, whether there are caps in the storage box, whether the water, power, and gas sources are connected before starting the machine. After all, conditions are ready, then close the main power QF, power indicator light, fault indicator, emergency stop indicator light is not on, then the start conditions are available, press the start button on the control box and the start switch at the filling, after the buzzer three warning, the whole machine starts running, take external washing, rinsing, filling fully automatic work mode, stop can be at the filling and control box press the stop button after the stop should turn off the main power.
Pharmaceutical Filler and Capper safety rules of use
1. No foreign objects (such as tools, rags, etc.) in Pharmaceutical Filler and Capper equipment.
2. Pharmaceutical Filler and Capper should not be allowed to have abnormal noise, if there is, it should be stopped immediately to check the reason.
3. All protective materials should be safe and reliable, it is strictly prohibited to wear clothing that may be hung by moving parts (such as scarves, bracelets, watches, etc.).
4. Long hair, should wear a hair cover.
5. Do not use water and other liquids to clean the electrical unit.
6. Cleaning should wear work clothes, gloves, glasses, etc., to prevent strong acid, strong alkali corrosion.
7. When Pharmaceutical Filler and Capper is running, someone must monitor it and do not approach the machine with tools or other objects.
8. Don't let the staff who are not related to the operation approach the installation of Pharmaceutical Filler and Capper.
Precautions for Pharmaceutical Filler and Capper
1、After unpacking Pharmaceutical Filler and Capper, first check whether the random technical information is complete and whether the machine is damaged in transportation, to solve the problem in time.
2、Install and adjust the feeding and discharging components according to the shape illustration in this manual.
3、Lubricate each lubrication point with new lubricant.
4、Turn the Pharmaceutical Filler and Capper by shaking the handle, check whether the Pharmaceutical Filler and Capper are running in the correct direction (facing the motor spindle in the counterclockwise direction), and the installation precautions of the Pharmaceutical Filler and Capper must be protected from grounding.
If you are interested in Pharmaceutical Filler and Capper, please contact us, our website is www.cnzpack.com.