











Capping Machine is filling equipment specially designed for new oral liquid easy-pull bottles. The design is reasonable, the structure is simple, the operation is convenient, and a mechanical stop filling device is provided for lack of bottles. So what are the adjustment methods of the Capping Machine? Let's take a look together next.
This is the content list:
l Capping Machine feeding half adjustment
l Matters needing attention in discharging
l Adjustment of the locking device
l Vibrator adjustment
Capping Machine feeding half adjustment
Adjust the bottle blocking plate on the feeding half of the Capping Machine upwards to shorten the adaptation to the bottle feeding stroke. Adjust downwards to make the Capping Machine adapt to the extension of the bottle feeding stroke. Adjust the positioning bottle position left and right to align the bottle position when the movable tooth is running, so that the bottle can be fed into the positioning tooth smoothly. Adjust the bottle blocking plate of the Capping Machine so that the width of the bottle inlet is about 22 mm.
Adjust the perfusion Capping Machine component. The role of the perfusion Capping Machine component is to make the liquid medicine be delivered to each easy-pull bottle in time through the dosing device, one-way valve, and needle. Therefore, the needle must enter the bottle mouth properly and the filling time must be appropriate. Adjust the Capping Machine side cam to rotate clockwise or counterclockwise so that the needle is inserted into the bottle mouth just after the empty bottle enters the toothed position. And lift the needle before leaving the toothed position. The filling time of the Capping Machine is adjusted. Turn the cam clockwise or reverse the adjustable needle into the bottle mouth and start filling immediately, and stop filling before the needle leaves the bottle mouth.
Matters needing attention in discharging
Since the Capping Machine is an easy-pull bottle filling and locking device, the discharging has been capped and sealed. To prevent the locked bottle from overturning, it must be placed on the Capping Machine discharge hopper before the first bottle is discharged. Several empty bottles can be transported to the discharge hopper smoothly to keep the locked bottles and sent to the next process with the bottle hopper.
Adjustment of the locking device
Capping Machine capping time adjustment, adjust the cam rotation angle. When the filling liquid bottle enters the locking tooth position, the locking shaft has moved and left the bottle cap before the moving tooth approaches the bottle. The capping pressure is adjusted, and the capping pressure is adjusted. The size of the cap pressure is directly related to the quality of the lock. If the pressure is too high to break the easy-pull bottle, and the pressure is too small, it will affect the sealing performance. Therefore, the nut should be adjusted according to the actual average height of the easy-pull bottle to adjust the pressure to the best.
Capping Machine blade action time adjustment, the blade should be close to the bottleneck before the end of the capping, otherwise, the locking effect of some short bottles cannot be achieved. Loosen the nut during adjustment, and adjust the shaft and up and down to make the blade action time sooner or later. When adjusting the lock of the Capping Machine, pay attention to the locking of the nuts after the adjustment of each department. The easy-pull bottle must be used for the initial valve test. The average height must be taken. Irregular easy-pull bottles cannot enter the lock to avoid damage to the parts.
Vibrator adjustment
The Capping Machine adopts the principle of electromagnetic oscillation to drop the bottle cap to the proper position along the track according to a certain movement trajectory. The vibrator is packaged separately when it leaves the factory, and the lower rail opening must be aligned with the movement rail of the easy-pull bottle when installed. To adjust the gap between the magnets of the Capping Machine, loosen the screw, open the cover, adjust the nut, and make the vibration of the Capping Machine low and fast.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It strictly controls the production of the Capping Machine. A large number of factory tests are carried out before Capping Machine leaves the factory to ensure product quality. If you are interested in Capping Machine, you can Contact Us, our website is www.cnzpack.com.
In our production and life, Capping Machine is also called a Capping Machine, Capping Machine, or Capping Machine, which is used for screwing and unscrewing the caps of plastic bottles and glass bottles (molded bottles or tube bottles). equipment. Capping Machine is highly intelligent capping equipment with advanced technology, unique design, and easy operation. During the entire capping process, workers only need to place the cap on the mouth of the bottle, and then the bottle is automatically sent to the capping wheel and automatically tightened to complete the capping operation. The Capping Machine evacuates the packaging bottle and then tightens it, which prolongs the storage time of the packaging, reduces the failure rate of the Capping Machine, and improves the packaging efficiency of the Capping Machine. So what are the matters needing attention when operating Capping Machine correctly? Let's take a look together next.
This is the content list:
l Capping Machine rolling wheel adjustment
l Capping Machine lock wheel adjustment
l Capping Machine cap lock
l Capping Machine height adjustment
Capping Machine rolling wheel adjustment
Place the Capping Machine bottle on the bracket and raise the bracket to the highest point. First, loosen the lock nut to adjust the rolling wheel so that the (sprung) edge of the two Capping Machine rolling wheels is at the threading of the bottle. Click on it, then loosen the lock nut, and then adjust the adjusting screw so that the edges of the two rolling wheels are in contact with the cover, and a little pressure is appropriate, and then tighten the nut.
Capping Machine lock wheel adjustment
Adjust the two Capping Machine locking wheels, first loosen the locking nuts, adjust the locking wheels so that the edges of the two locking wheels are in contact with the lower edge of the bottle cap, a little pressure is appropriate, and then tighten the nuts (Note: Adjust Capping Machine Should be from loose to tight, adjust while pulling the lock).
Capping Machine cap lock
Loosen the top screw, remove the Capping Machine gland head, and then remove the entire Capping Machine lock head, install the appropriate plastic lock head on the cone sleeve, and then adjust the lifting height of the bracket to meet the working requirements.
Capping Machine height adjustment
Start the Capping Machine to lower the bracket to the lowest point, then place the bottle on the bracket, loosen the brake nut, turn the adjusting screw to raise the bracket, and then adjust the appropriate distance between the cap of the Capping Machine and the capping head (generally All are adjusted in place at the factory).
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream/ointment, fluid, and semi-fluid materials. We have obtained ISO9001 quality management system certification, and some products have passed CE certification. Our company has obtained more than 20 invention patents and utility model patents. If you are interested in Capping Machine, you can contact us, our website is www.cnzpack.com.
Tube Filling machine And Sealing machine adopt the latest module circuit, stable working performance, high efficiency, and all components adopt famous brand products. Under the careful design of our company, various advanced Tube Filling Machine And Sealing machines have been produced. Mainly used for sealing toothpaste, cosmetics, medicine, food, industrial products, and various hoses. Next, let's take a look at the cleaning and maintenance of the Tube Filling machine And Sealing machine. Here are some answers.
Here is the content list:
Tube Filling machine And Sealing machine cleaning.
Daily maintenance of Tube Filling machine And Sealing machine.
First, regularly clean the surface of the Tube Filling machine And Sealing machine, the bottom plate and the lower mold slide plate, grooves, the upper mold inner pressure plate, and the positioning rod. Second, grease should be added to the transmission parts of the lower mold slide plate, pressing rod bearing, eccentric wheel and guidepost, guide rail, and so on regularly to ensure the performance of the Tube Filling Machine And Sealing machine. Third, the method of cleaning the toothed knife: first plug the two drain holes of the lower mold with a cotton ball, pour boiling water into the groove of the lower mold, until it is full, then push the slide of the lower mold into place, and lower the upper mold. Press to the lowest point, let the toothed knife soak for a few minutes until it is clean, repeat several times.
First, check the equipment ground wire frequently to ensure reliable contact; clean the weighing platform frequently; check whether the pneumatic pipeline is leaking and whether the air pipe is broken. Second, change the lubricating oil of the reducer motor every year, check the tightness of the chain, and adjust the tension in time. Third, the sensor of the Tube Filling Machine And Sealing machine is a high-precision, high-sealing, and high-sensitivity device. Impact and overload are strictly prohibited, and no contact is allowed during the working process, and it is not allowed to be disassembled if it is not required for maintenance. Fourth, if it is not used for a long time, empty the material in the pipeline. Fifth, observe the moisture filter and oil mist device of the pneumatic combination two-piece before going to work every day. Sixth, during the production, we should always patrol and observe the mechanical parts to see if the rotation and lifting are normal if there is any abnormality, and if the screws are loose. Seventh, do a good job of cleaning and sanitation, keep the surface of the Tube Filling machine And Sealing machine clean, often remove the accumulation on the scale body, and pay attention to keeping the electric control cabinet clean.
Wenzhou Zungwan Intelligent Machine Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream, ointment, fluid, and semi-fluid materials. If you are engaged in work related to Tube Filling machine And Sealing machine or want to know more about our company, you can contact us. Our official website is https:// www.cnzpack.com/.
With the increasingly fierce competition in the manufacturing and production of plastic bottles in the food and pharmaceutical industries, Bottle Unscrambler has become more and more solid backing for the food and pharmaceutical plastic bottle markets. So how does it play a role? We will introduce the work process and personnel operation specifications of Bottle Unscrambler. Let's take a look together next.
This is the content list:
The workflow of Bottle Unscrambler
Personnel operation specification of Bottle Unscrambler
The workflow of Bottle Unscrambler is generally as follows: manually put materials into the storage bottle library, the materials in the storage bottle library will be automatically quantified and fed to the turntable at the set speed. The turntable rotates at a high speed to supply the bottles as required, the web wheel The irregular bottles are removed, and the bottle dividing part sends the bottles from the turntable to the bottle unscramble part at a certain speed. The Bottle Unscrambler part of the Bottle Unscrambler clamps the bottles to the working surface of the conveyor through the conveyor belts on both sides, and at the same time sorts the bottles through the bottle turner. The Bottle Unscrambler electronic control system performs real-time monitoring and feedback through the sensors of each part to achieve fully automated operation requirements, and save a lot of labor costs and avoid losses caused by human error factors.
To ensure the normal and safe operation of Bottle Unscrambler, there are special operating procedures established for it. Operators and equipment management personnel shall perform standardized operations of Bottle Unscrambler under these procedures. This safe operation specification is commonly used in Bottle Unscramblers, mixers, high-speed automatic Bottle Unscramblers, etc.
1. First check the Bottle Unscrambler's intact, clean, and expiration status identification and the equipment operation record of the shift. If the inspection finds that the Bottle Unscrambler has exceeded the cleaning validity period, it is necessary to further clean the equipment according to the equipment cleaning operation rules and fill in the equipment status identification.
2. Check the Bottle Unscrambler and the Bottle Unscrambler to confirm that there is no foreign matter, and turn the bottle plate and unscrambler to confirm that it can work normally.
3. Turn on the Bottle Unscrambler power switch, check the touch screen and three photoelectric switches. If both are energized, the lack of a bottle alarm will be displayed on the touch screen. When the electric eye is blocked by hand, the screen displays the blocking alarm, and the two photoelectric switches are in a normal state.
4. Turn on the Bottle Unscrambler compressed air, use the bottom of the bottle to shake under the electric eye of the bottle puller, compressed air will be sprayed out, and the equipment can be turned on normally.
To ensure that the various parts of the Bottle Unscrambler can work normally, the formal operation can be divided into five steps: click the host start and lift start on the touch screen respectively, and observe whether the Bottle Unscrambler has abnormal noise when it is running. After powering on the Bottle Unscrambler and confirming that there is no abnormal condition, stop the device, but the qualified infusion bottle upright in the bottle feeding bracket, and start the device again. The bottle will pass through the rotating carousel of the device and enter the conveyor belt to start the bottle unscramble operation. Run at low speed when starting up, and then adjust the lifting speed and unscramble speed according to the actual production, so that the speed of the Bottle Unscrambler equipment can match the actual production speed. To prevent such phenomena from happening. If such a phenomenon occurs, stop the machine immediately to eliminate the fault before it can continue to run. During the operation of the equipment, the bottles should be put in continuously, and observe whether there are phenomena such as pouring, jamming, broken bottles, etc. If any, stop the machine immediately and start the production after troubleshooting. After the production is over, stop the equipment, turn off the power of the Bottle Unscrambler, and clear the remaining materials out of the equipment.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. When the Liquid Filling Machine leaves the factory, it will provide customers with detailed Liquid Filling Machine operation procedures and operating specifications. If you are interested in Liquid Filling Machine, you can contact us, our website is www.cnzpack.com.
ZUNGWAN is the leading manufacturer of perfume and cosmetic filling machines and lines, providing all solutions from the smallest to the fastest machines (400 bpm) for a vast range of applications :
Perfumes (bottles, samples, miniatures), liquid Cosmetics (shampoo, conditioner, lotions, gel, serum, foam bath, liquid soap, shower gel, hair dye, nail varnish, foundation, makeup remover, suntan lotion, deodorant, roll-on, etc.) and Cosmetic creams (jars, lip-gloss, mascara).
They ordered two hand sanitizer filling lines, requiring a speed of 150 bottles per minute, from automatic bottle management - automatic filling - automatic cap management - automatic capping - automatic labeling.
The whole production line was designed, developed and produced by our company, and it took 70 days from the finalization of the contract to delivery. Because of the outbreak of New Crown epidemic in the U.S., we completed the delivery of the equipment ahead of schedule and flew it to the U.S.
Cartoning machine is the description of automatic loading of medicine bottles, trays, ointments, etc. into folded cartons and completing the capping action. Some Cartoning machines with stronger functions also have functions such as sealing labels or heat shrink packaging. So what are the considerations for the daily maintenance of the Cartoning machine? Let's take a look together next.
This is the content list:
l Comply with safe operating procedures
l Refuel or change the oil on time
l Be organized
l Clean inside and outside of equipment
Comply with safe operating procedures
Comply with the Cartoning machine's safety operating procedures and do not overload the equipment. The Cartoning machine's safety protection devices are complete and reliable, and unsafe factors are eliminated in time. For example: Do not touch the inverter within 5 minutes after the power of the Cartoning machine is cut off because it will have a relatively high residual voltage, which will be released after a few minutes. After the Cartoning machine work is finished, you should do a good job of cleaning, use a brush to remove all unclean things, and check whether the power is turned off.
Refuel or change the oil on time
Cartoning machine is well lubricated, add oil or change oil on time, keep oiling, no dry friction. The Cartoning machine should be refueled before starting up. Where there is reciprocating motion, add oil, twice a day, 5-6 drops each time. Add butter once a month to the bearings of the rotating part on both sides of the folding machine. Grease the sliding part of the tongue guide once a week.
Be organized
Cartoning machine tools, accessories, and workpieces (products) should be neatly arranged, Cartoning machine pipes and lines should be organized.
Equipment interior and exterior clean
The interior and exterior of the Cartoning machine equipment should be clean and tidy. All sliding surfaces, lead screws, rack and pinion, gearbox, oil holes, etc. are free of oil and dirt, and all parts of the Cartoning machine do not leak oil or air. The debris, debris, and dirt around the equipment should be cleaned up. For example, there should be no foreign objects in the main motor of the Cartoning machine, the casing should be kept clean, the cooling fan should be good, and it should be maintained regularly. Cartoning machine photoelectric switch and proximity switch detection surface should not have foreign matter and pollution, otherwise, it will cause malfunction. The detection distance should be properly adjusted, and the bracket should be kept tight and not loose to avoid damage when the machine is running. The electrical components inside and outside the electrical cabinet of the Cartoning machine must be kept clean and well dissipated.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It will test the Cartoning machine before leaving the factory and provide warranty service. If you are interested in Cartoning machine, you can contact us. Our website is www.cnzpack.com. I look forward to your coming and hope to cooperate with you.
Pharmaceutical Filler and Capper have been used by more and more companies in the industry, and many operators have learned how to use Pharmaceutical Filler and Capper, but they do not know much about its properties and working principle, so when Pharmaceutical Filler and Capper malfunctions, there is no way to start. So what is the working principle of Pharmaceutical Filler and Capper? Let's take a look at it.
This is the content list:
l Introduction of Pharmaceutical Filler and Capper
l Pharmaceutical Filler and Capper working principle
Introduction of Pharmaceutical Filler and Capper
Pharmaceutical Filler and Capper is a machine for filling and sealing objects, which is a small product in the packaging machine and is divided into the semi-automatic filling machine and fully automatic filling line in terms of the degree of automation of Pharmaceutical Filler and Capper production. From the point of view of packaging materials can be divided into liquid filling machinery, paste filling machine, powder filling machine, granule filling machine. Recently, with the QS certification of food, many manufacturers have started to focus on the quality and packaging of Pharmaceutical Filler and Capper.
Pharmaceutical Filler and Capper working principle
For Pharmaceutical Filler and Capper to achieve the linkage effect, it is driven by transmission machinery, so that all parts can work in coordination. When Pharmaceutical Filler and Capper reaches a certain number of bottles, there is a special infrared sensor on the inlet track to receive the induction, which automatically catches the bottles behind and allows the bottles in front to be filled. After the bottles are filled, then let the bottles behind enter to fill the space, to realize no bottle without filling. When the bottles enter the position under the filling head, the other working sections stop and only the filling headworks, when the bottles leave, the Pharmaceutical Filler and Capper's head stops working, the track section works and the bottle stopper is released. The clean bottles coming out of the bottle washer are fed into the inlet spiral of Pharmaceutical Filler and Capper by the bottle feeding belt and sent to the bottle-holding cylinder on the rotary table through the bottle feeding star wheel and raised, the bottle mouth is guided by the centering device and pressed against the lower part of the filling valve to form a seal. After being evacuated, the backpressure gas (CO,) in the storage cylinder is rushed into the bottle, when the gas pressure in the bottle is equal to the gas pressure in the storage cylinder, the liquid valve opens under the action of the liquid valve spring, at this time, the object is automatically filled into the glass bottle along the bottle wall through the guidance of the umbrella type reflective ring on the return tube and is replaced into the storage cylinder through the return tube, when the object rises to a certain height and closes the return tube mouth. Automatically stop down the object. Then the liquid valve and gas valve are closed to drain the pressure gas in the neck part of the bottle to prevent the gushing of the object with gas when the glass bottle is descending so that the whole filling process is completed This is the main working principle of Pharmaceutical Filler and Capper, and the users can use it according to these Users can know clearly which part of the machine has problems and repair them according to these features of Pharmaceutical Filler and Capper.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer, constantly researching and developing packaging machinery for various materials such as liquid, powder, cream/oil, fluid, and semi-fluid. Extensive tests are conducted before the Pharmaceutical Filler and Capper leave the factory to ensure the quality of products and maintain the healthy development of the Pharmaceutical Filler and Capper market. If you are interested in Pharmaceutical Filler and Capper, you can contact us at www.cnzpack.com. You are very welcome and we look forward to working with you.