











Capping Machine is filling equipment specially designed for new oral liquid easy-pull bottles. The design is reasonable, the structure is simple, the operation is convenient, and a mechanical stop filling device is provided for lack of bottles. So what are the adjustment methods of the Capping Machine? Let's take a look together next.
This is the content list:
l Capping Machine feeding half adjustment
l Matters needing attention in discharging
l Adjustment of the locking device
l Vibrator adjustment
Capping Machine feeding half adjustment
Adjust the bottle blocking plate on the feeding half of the Capping Machine upwards to shorten the adaptation to the bottle feeding stroke. Adjust downwards to make the Capping Machine adapt to the extension of the bottle feeding stroke. Adjust the positioning bottle position left and right to align the bottle position when the movable tooth is running, so that the bottle can be fed into the positioning tooth smoothly. Adjust the bottle blocking plate of the Capping Machine so that the width of the bottle inlet is about 22 mm.
Adjust the perfusion Capping Machine component. The role of the perfusion Capping Machine component is to make the liquid medicine be delivered to each easy-pull bottle in time through the dosing device, one-way valve, and needle. Therefore, the needle must enter the bottle mouth properly and the filling time must be appropriate. Adjust the Capping Machine side cam to rotate clockwise or counterclockwise so that the needle is inserted into the bottle mouth just after the empty bottle enters the toothed position. And lift the needle before leaving the toothed position. The filling time of the Capping Machine is adjusted. Turn the cam clockwise or reverse the adjustable needle into the bottle mouth and start filling immediately, and stop filling before the needle leaves the bottle mouth.
Matters needing attention in discharging
Since the Capping Machine is an easy-pull bottle filling and locking device, the discharging has been capped and sealed. To prevent the locked bottle from overturning, it must be placed on the Capping Machine discharge hopper before the first bottle is discharged. Several empty bottles can be transported to the discharge hopper smoothly to keep the locked bottles and sent to the next process with the bottle hopper.
Adjustment of the locking device
Capping Machine capping time adjustment, adjust the cam rotation angle. When the filling liquid bottle enters the locking tooth position, the locking shaft has moved and left the bottle cap before the moving tooth approaches the bottle. The capping pressure is adjusted, and the capping pressure is adjusted. The size of the cap pressure is directly related to the quality of the lock. If the pressure is too high to break the easy-pull bottle, and the pressure is too small, it will affect the sealing performance. Therefore, the nut should be adjusted according to the actual average height of the easy-pull bottle to adjust the pressure to the best.
Capping Machine blade action time adjustment, the blade should be close to the bottleneck before the end of the capping, otherwise, the locking effect of some short bottles cannot be achieved. Loosen the nut during adjustment, and adjust the shaft and up and down to make the blade action time sooner or later. When adjusting the lock of the Capping Machine, pay attention to the locking of the nuts after the adjustment of each department. The easy-pull bottle must be used for the initial valve test. The average height must be taken. Irregular easy-pull bottles cannot enter the lock to avoid damage to the parts.
Vibrator adjustment
The Capping Machine adopts the principle of electromagnetic oscillation to drop the bottle cap to the proper position along the track according to a certain movement trajectory. The vibrator is packaged separately when it leaves the factory, and the lower rail opening must be aligned with the movement rail of the easy-pull bottle when installed. To adjust the gap between the magnets of the Capping Machine, loosen the screw, open the cover, adjust the nut, and make the vibration of the Capping Machine low and fast.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It strictly controls the production of the Capping Machine. A large number of factory tests are carried out before Capping Machine leaves the factory to ensure product quality. If you are interested in Capping Machine, you can Contact Us, our website is www.cnzpack.com.
Pharmaceutical Filler and Capper have been used by more and more companies in the industry, and many operators have learned how to use Pharmaceutical Filler and Capper, but they do not know much about its properties and working principle, so when Pharmaceutical Filler and Capper malfunctions, there is no way to start. So what is the working principle of Pharmaceutical Filler and Capper? Let's take a look at it.
This is the content list:
l Introduction of Pharmaceutical Filler and Capper
l Pharmaceutical Filler and Capper working principle
Introduction of Pharmaceutical Filler and Capper
Pharmaceutical Filler and Capper is a machine for filling and sealing objects, which is a small product in the packaging machine and is divided into the semi-automatic filling machine and fully automatic filling line in terms of the degree of automation of Pharmaceutical Filler and Capper production. From the point of view of packaging materials can be divided into liquid filling machinery, paste filling machine, powder filling machine, granule filling machine. Recently, with the QS certification of food, many manufacturers have started to focus on the quality and packaging of Pharmaceutical Filler and Capper.
Pharmaceutical Filler and Capper working principle
For Pharmaceutical Filler and Capper to achieve the linkage effect, it is driven by transmission machinery, so that all parts can work in coordination. When Pharmaceutical Filler and Capper reaches a certain number of bottles, there is a special infrared sensor on the inlet track to receive the induction, which automatically catches the bottles behind and allows the bottles in front to be filled. After the bottles are filled, then let the bottles behind enter to fill the space, to realize no bottle without filling. When the bottles enter the position under the filling head, the other working sections stop and only the filling headworks, when the bottles leave, the Pharmaceutical Filler and Capper's head stops working, the track section works and the bottle stopper is released. The clean bottles coming out of the bottle washer are fed into the inlet spiral of Pharmaceutical Filler and Capper by the bottle feeding belt and sent to the bottle-holding cylinder on the rotary table through the bottle feeding star wheel and raised, the bottle mouth is guided by the centering device and pressed against the lower part of the filling valve to form a seal. After being evacuated, the backpressure gas (CO,) in the storage cylinder is rushed into the bottle, when the gas pressure in the bottle is equal to the gas pressure in the storage cylinder, the liquid valve opens under the action of the liquid valve spring, at this time, the object is automatically filled into the glass bottle along the bottle wall through the guidance of the umbrella type reflective ring on the return tube and is replaced into the storage cylinder through the return tube, when the object rises to a certain height and closes the return tube mouth. Automatically stop down the object. Then the liquid valve and gas valve are closed to drain the pressure gas in the neck part of the bottle to prevent the gushing of the object with gas when the glass bottle is descending so that the whole filling process is completed This is the main working principle of Pharmaceutical Filler and Capper, and the users can use it according to these Users can know clearly which part of the machine has problems and repair them according to these features of Pharmaceutical Filler and Capper.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer, constantly researching and developing packaging machinery for various materials such as liquid, powder, cream/oil, fluid, and semi-fluid. Extensive tests are conducted before the Pharmaceutical Filler and Capper leave the factory to ensure the quality of products and maintain the healthy development of the Pharmaceutical Filler and Capper market. If you are interested in Pharmaceutical Filler and Capper, you can contact us at www.cnzpack.com. You are very welcome and we look forward to working with you.
Liquid Filling Machine is used in the beverage, drinking water, and liquor industries and has become a very important equipment in the liquid food industry. function. So what are the main structural designs of Liquid Filling Machine? Let's take a look at it together.
This is the content list:
l The transmission system of Liquid Filling Machine
l Liquid Filling Machine's actuator
l Liquid Filling Machine's control system
l The body part of the Liquid Filling Machine
The transmission system of Liquid Filling Machine
Liquid Filling Machine's transmission system, this part is to transmit power and motion to various actuators, control elements, and auxiliary mechanisms. Liquid Filling Machine's main transmission components include gears, sprockets, worm gears, screws, and nuts, etc.
Liquid Filling Machine's actuator
Liquid Filling Machine's actuator, this part is mainly to achieve the Liquid Filling Machine packaging process operation and auxiliary operation part, packaging process operation refers to filling, auxiliary operation part refers to packaging materials and products supply and delivery, Liquid Filling Machine packaging material output, etc., the actuator is the core of the machine, its action sequence, and movement law according to the process principle and requirements.
Liquid Filling Machine's control system
The control system of the Liquid Filling Machine is to control the relevant parts of the Liquid Filling Machine, allocate the movements to the actuators, and make them coordinate the movements according to the time and sequence, thus realizing the process functions of the Liquid Filling Machine.
The body part of the Liquid Filling Machine
The body of the Liquid Filling Machine is the skeleton of the Liquid Filling Machine, which mainly plays the role of supporting and positioning the parts. The stability of the body is the first consideration in the design, and the center of gravity of the Liquid Filling Machine should be lowered as much as possible to make the Liquid Filling Machine work smoothly.
The mainframe of Liquid Filling Machine is to fix and support all the working actuators, transmission parts, control systems, to ensure their relative position correctness and stability. The vacuum system of the Liquid Filling Machine sucks the air out of the bottle, thus generating negative pressure inside the bottle, the liquid is filled into the bottle from the liquid tank through the liquid supply system and the filling head, when the liquid reaches the required liquid level, the inlet port is closed and the suction port sucks the excess liquid and foam away.
Liquid Filling Machine of Wenzhou Zungwan Intelligent Machinery Co., Ltd. is first-class product quality and efficient and fast after-sales service, which has created the excellent products of "Zhonghuan". To meet the market demand of Liquid Filling Machine is our eternal topic and sincere commitment to our customers. If you are interested in Liquid Filling Machine, please contact us, our website is www.cnzpack.com. We will carry forward the spirit of "comprehensive innovation, perseverance", self-discipline and strive to be the first, with enthusiasm, new attitude to provide new and old customers with more perfect service. We are looking forward to cooperating with you.
With the increasingly fierce competition in the manufacturing and production of plastic bottles in the food and pharmaceutical industries, Bottle Unscrambler has become more and more solid backing for the food and pharmaceutical plastic bottle markets. So how does it play a role? We will introduce the work process and personnel operation specifications of Bottle Unscrambler. Let's take a look together next.
This is the content list:
The workflow of Bottle Unscrambler
Personnel operation specification of Bottle Unscrambler
The workflow of Bottle Unscrambler is generally as follows: manually put materials into the storage bottle library, the materials in the storage bottle library will be automatically quantified and fed to the turntable at the set speed. The turntable rotates at a high speed to supply the bottles as required, the web wheel The irregular bottles are removed, and the bottle dividing part sends the bottles from the turntable to the bottle unscramble part at a certain speed. The Bottle Unscrambler part of the Bottle Unscrambler clamps the bottles to the working surface of the conveyor through the conveyor belts on both sides, and at the same time sorts the bottles through the bottle turner. The Bottle Unscrambler electronic control system performs real-time monitoring and feedback through the sensors of each part to achieve fully automated operation requirements, and save a lot of labor costs and avoid losses caused by human error factors.
To ensure the normal and safe operation of Bottle Unscrambler, there are special operating procedures established for it. Operators and equipment management personnel shall perform standardized operations of Bottle Unscrambler under these procedures. This safe operation specification is commonly used in Bottle Unscramblers, mixers, high-speed automatic Bottle Unscramblers, etc.
1. First check the Bottle Unscrambler's intact, clean, and expiration status identification and the equipment operation record of the shift. If the inspection finds that the Bottle Unscrambler has exceeded the cleaning validity period, it is necessary to further clean the equipment according to the equipment cleaning operation rules and fill in the equipment status identification.
2. Check the Bottle Unscrambler and the Bottle Unscrambler to confirm that there is no foreign matter, and turn the bottle plate and unscrambler to confirm that it can work normally.
3. Turn on the Bottle Unscrambler power switch, check the touch screen and three photoelectric switches. If both are energized, the lack of a bottle alarm will be displayed on the touch screen. When the electric eye is blocked by hand, the screen displays the blocking alarm, and the two photoelectric switches are in a normal state.
4. Turn on the Bottle Unscrambler compressed air, use the bottom of the bottle to shake under the electric eye of the bottle puller, compressed air will be sprayed out, and the equipment can be turned on normally.
To ensure that the various parts of the Bottle Unscrambler can work normally, the formal operation can be divided into five steps: click the host start and lift start on the touch screen respectively, and observe whether the Bottle Unscrambler has abnormal noise when it is running. After powering on the Bottle Unscrambler and confirming that there is no abnormal condition, stop the device, but the qualified infusion bottle upright in the bottle feeding bracket, and start the device again. The bottle will pass through the rotating carousel of the device and enter the conveyor belt to start the bottle unscramble operation. Run at low speed when starting up, and then adjust the lifting speed and unscramble speed according to the actual production, so that the speed of the Bottle Unscrambler equipment can match the actual production speed. To prevent such phenomena from happening. If such a phenomenon occurs, stop the machine immediately to eliminate the fault before it can continue to run. During the operation of the equipment, the bottles should be put in continuously, and observe whether there are phenomena such as pouring, jamming, broken bottles, etc. If any, stop the machine immediately and start the production after troubleshooting. After the production is over, stop the equipment, turn off the power of the Bottle Unscrambler, and clear the remaining materials out of the equipment.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. When the Liquid Filling Machine leaves the factory, it will provide customers with detailed Liquid Filling Machine operation procedures and operating specifications. If you are interested in Liquid Filling Machine, you can contact us, our website is www.cnzpack.com.
Celebrate the 10th anniversary of ZUNGWAN intelligent machine
——A letter from ZUNGWAN machine to you
Hello, partners, customers and friends of ZUNGWAN machine!
April 12 is the 10th anniversary of the establishment of ZUNGWAN intelligent machine. I'm 10 years old. From April 12, 2011 when I officially got my birth certificate (business license) to today, I've accompanied my close partners and colleagues through 10 spring, summer, autumn and winter, 10 special birthdays, and cooperated with more than 200 large, medium and small enterprises, companies and factories at home and abroad, It has sold more than 2000 automatic filling and sealing machines, more than 1000 automatic filling and capping machines, more than 3000 semi-automatic filling machines and more than 500 filling and packaging production lines.
My name is Wenzhou ZUNGWAN Intelligent Machine Co., Ltd. now has more than 50 employees. I am a well-known brand enterprise specializing in the R & D, production and sales of hose filling and sealing machine, aluminum tube filling and folding machine, various material filling and capping machine, full-automatic linear filling machine, capping machine, labeling machine, water cream filling and capping machine and other related packaging machinery and equipment supporting products, It has a complete and scientific quality management system. The enterprise integrity, company strength and product quality of ZUNGWAN Intelligent Machine have won the full support, trust and recognition of customers and friends at home and abroad.
Since the establishment of the company in 2011, our main sales and production staff have worked in the packaging machinery industry for more than 5 years. They have rich experience in R & D, production, sales and after-sales of cosmetics, skin care products and drug packaging production equipment. After successfully completing hundreds of enterprise order projects, Further promote our strategic sales of machinery and improve after-sales tracking service. In the next development period of the enterprise, it will participate more in the cooperation with famous brand companies, have a close relationship with cosmetics, skin care products, drugs and food enterprises, and create new brilliance in central machinery design, innovation and breakthrough with more like-minded people.
By combining the production technical strength of both supply and demand sides and using advanced machine professional knowledge, since 2011, we have been engaged in the sales of packaging machinery industry for more than 15 years. The chief engineer of filling and sealing machine production workshop, Potter and director Wu, who has been engaged in quality control for more than 20 years, have combined their own electronic pneumatic professional knowledge and years of technical training to launch various filling and sealing machines and filling capping machines, Plastic molding filling and sealing machine filling and sealing machine, fully meet the production requirements of customers and help customers create benefits; Time and again improve the service life of products and the simplicity of operation, so that the equipment I make is favored by enterprises, companies and factories at home and abroad.
I adhere to the enterprise oriented ideology and policy of "customer-oriented and product-based", so as to realize the integration of industrial chain, provide customers with multiple production engineering schemes, and provide packaging machinery and equipment with stable performance, excellent quality and reasonable price and immediate and thoughtful after-sales service, so as to solve actual production problems for customers with the most sincere attitude, Avoid unnecessary waste of expenses caused by enterprises. Strive to meet customers' purchase intention of value for money and value for money.
Tube Filling machine And Sealing machine adopt the latest module circuit, stable working performance, high efficiency, and all components adopt famous brand products. Under the careful design of our company, various advanced Tube Filling Machine And Sealing machines have been produced. Mainly used for sealing toothpaste, cosmetics, medicine, food, industrial products, and various hoses. Next, let's take a look at the cleaning and maintenance of the Tube Filling machine And Sealing machine. Here are some answers.
Here is the content list:
Tube Filling machine And Sealing machine cleaning.
Daily maintenance of Tube Filling machine And Sealing machine.
First, regularly clean the surface of the Tube Filling machine And Sealing machine, the bottom plate and the lower mold slide plate, grooves, the upper mold inner pressure plate, and the positioning rod. Second, grease should be added to the transmission parts of the lower mold slide plate, pressing rod bearing, eccentric wheel and guidepost, guide rail, and so on regularly to ensure the performance of the Tube Filling Machine And Sealing machine. Third, the method of cleaning the toothed knife: first plug the two drain holes of the lower mold with a cotton ball, pour boiling water into the groove of the lower mold, until it is full, then push the slide of the lower mold into place, and lower the upper mold. Press to the lowest point, let the toothed knife soak for a few minutes until it is clean, repeat several times.
First, check the equipment ground wire frequently to ensure reliable contact; clean the weighing platform frequently; check whether the pneumatic pipeline is leaking and whether the air pipe is broken. Second, change the lubricating oil of the reducer motor every year, check the tightness of the chain, and adjust the tension in time. Third, the sensor of the Tube Filling Machine And Sealing machine is a high-precision, high-sealing, and high-sensitivity device. Impact and overload are strictly prohibited, and no contact is allowed during the working process, and it is not allowed to be disassembled if it is not required for maintenance. Fourth, if it is not used for a long time, empty the material in the pipeline. Fifth, observe the moisture filter and oil mist device of the pneumatic combination two-piece before going to work every day. Sixth, during the production, we should always patrol and observe the mechanical parts to see if the rotation and lifting are normal if there is any abnormality, and if the screws are loose. Seventh, do a good job of cleaning and sanitation, keep the surface of the Tube Filling machine And Sealing machine clean, often remove the accumulation on the scale body, and pay attention to keeping the electric control cabinet clean.
Wenzhou Zungwan Intelligent Machine Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream, ointment, fluid, and semi-fluid materials. If you are engaged in work related to Tube Filling machine And Sealing machine or want to know more about our company, you can contact us. Our official website is https:// www.cnzpack.com/.
Bottle Unscrambler scientific maintenance and daily management institutionalization are very important. Scientific maintenance and the establishment of a daily management and use system have a very important role and significance for the actual use of mechanical products. It improves the standardization and performance of daily maintenance. It is more convenient for people to choose, especially it can be better suited to play the role of mechanical products in actual production. It is necessary to carry out reasonable maintenance and management of Bottle Unscrambler to improve the performance advantages of the product itself and let Bottle Unscrambler can help production in time during operation. So what are the precautions for Bottle Unscrambler? Let's take a look together next.
This is the content list:
l Things to do when installing Bottle Unscrambler
l Precautions when using Bottle Unscrambler
l Matters needing attention when cleaning the automatic Bottle Unscrambler
Things to do when installing Bottle Unscrambler
1. Before installing the Bottle Unscrambler, we need to check the Bottle Unscrambler thoroughly to see if the materials are complete and whether it is damaged. If you find a problem, please communicate with the manufacturer in time to solve it.
2. After checking the completion of the Bottle Unscrambler, follow the installation instructions to assemble the Bottle Unscrambler and adjust accordingly. Then add lubricating oil to the place that needs lubrication to ensure the flexibility of the Bottle Unscrambler.
3. After the test run Bottle Unscrambler, if it runs normally, it means that the installation of Bottle Unscrambler is completed.
Precautions when using Bottle Unscrambler
1. According to Bottle Unscrambler production conditions, choose to use a power supply that meets Bottle Unscrambler specifications.
2. To prevent electric shock, the Bottle Unscrambler must be well-grounded. Please equip the Bottle Unscrambler with a power socket with a ground wire.
3. After turning off the Bottle Unscrambler power switch, there is still strong voltage in some circuits in the electrical control of the machine. If the control circuit needs to be repaired, the power cord must be unplugged to avoid electric shock.
Matters needing attention when cleaning the automatic Bottle Unscrambler
1. If the company needs to disassemble and wash the Bottle Unscrambler, please do not turn off the air source and power supply.
2. Avoid electric shock to Bottle Unscrambler. When disassembling the Bottle Unscrambler, do not directly rinse the body with water, because the Bottle Unscrambler is equipped with electrical control components. If the components contact the water source, there is a risk of electric shock and may damage the Bottle Unscrambler components.
3. It is strictly forbidden to show the residues of the filled items on the Bottle Unscrambler, such as oil stains, paints, etc. The existence of these things will accelerate the corrosion of the Bottle Unscrambler and affect its service life. If any residual items are found, they should be cleaned up in time.
4. Lubricate the Bottle Unscrambler regularly, clean the Bottle Unscrambler every once in a while, and make a cleaning record for later review.
We have obtained ISO9001 quality management system certification, and some products have passed CE certification. The production of Bottle Unscrambler is strictly controlled. If you are interested in Bottle Unscrambler, you can contact us. Our website is www.cnzpack.com.
The Mid-Autumn Festival is the second most important festival for a family reunion in China after the Spring Festival. Besides China, the Mid-Autumn Festival is also celebrated in many other Asian countries like Vietnam, Singapore, and Japan.
The Mid-Autumn Festival is also called the Moon Festival or Mooncake Festival. It would be celebrated on 21 September 2021. Gathering with families, eating moon cakes, and appreciating the fullest moon with lanterns, the Mid-Autumn Festival is a grand time for family reunions.
Besides those traditions in China, other Asian countries have their own unique customs of the Mid-Autumn Festival.
For example, the Mid-Autumn Festival is named Tết Trung Thu in Vietnamese. It is also known as a Children Festival. During the festival, parents will accompany their children and give them gifts like masks or lanterns. Most gifts are made by hand rather than buying at shops. Children would light lanterns and join in lion dance at the Mid-Autumn Festival.
Read Mid-Autumn Festival around the World to find more traditions in other countries.