bag forming filling and sealing machine- Manufacturers Factory Suppliers From China

The Mid-Autumn Festival is the second most important festival for a family reunion in China after the Spring Festival. Besides China, the Mid-Autumn Festival is also celebrated in many other Asian countries like Vietnam, Singapore, and Japan.

The Mid-Autumn Festival is also called the Moon Festival or Mooncake Festival. It would be celebrated on 21 September 2021. Gathering with families, eating moon cakes, and appreciating the fullest moon with lanterns, the Mid-Autumn Festival is a grand time for family reunions.

Besides those traditions in China, other Asian countries have their own unique customs of the Mid-Autumn Festival.

For example, the Mid-Autumn Festival is named Tết Trung Thu in Vietnamese. It is also known as a Children Festival. During the festival, parents will accompany their children and give them gifts like masks or lanterns. Most gifts are made by hand rather than buying at shops. Children would light lanterns and join in lion dance at the Mid-Autumn Festival.

Read Mid-Autumn Festival around the World to find more traditions in other countries.

The Pharmaceutical Filler and Capper is no stranger to the health care industry, after all, it has a major impact on it. Pharmaceutical Filler and Capper can specially package various products to ensure that they can be sold properly in the market. The Pharmaceutical Filler and Capper is no longer the traditional equipment that people know, but a smarter and more efficient one. So how does the new generation of Pharmaceutical Filler and Capper work? Let's take a look together.

This is the content list:

l Highlights of Pharmaceutical Filler and Capper

l Performance of the Pharmaceutical Filler and Capper

Highlights of Pharmaceutical Filler and Capper

First of all, the Pharmaceutical Filler and Capper are categorized so that they can provide the right equipment for the different needs of the pharmaceutical industry. Pharmaceutical Filler and Capper are divided into quantitative and fully automatic, both of which are very popular. Pharmaceutical Filler and Capper have an advanced control system, accurate filling quantity, reliable performance, and beautiful appearance, which is ideal for freeze-dried preparation, liquid preparation, and blood products. Pharmaceutical Filler and Capper are suitable for matching with the linkage production line. The filling volume is controlled by a computer, the filling accuracy of the peristaltic pump is high, the range of adjusting dose is large, and it is suitable for various viscosities. Pharmaceutical Filler and Capper's filling needle does not come into contact with the drug and is free of contamination. Peristaltic pump filling system is easy to clean and disinfect. No bottle is not filled, no bottle automatically stops and the bottle collapses. Pharmaceutical Filler and Capper automatically display and counts. A filling system with shrinkage function, no drip. Equipped with Mitsubishi frequency conversion mechanism. Variable frequency speed regulation. The whole machine is designed according to GMP requirements. The equipment tends to be intelligent to make the filling process easier.

Performance of Pharmaceutical Filler and Capper

Pharmaceutical Filler and Capper's performance is good on the one hand, Pharmaceutical Filler and Capper have a wide range of use, can have a certain degree of fluidity of the powder-like, granular materials for reasonable packaging. The Pharmaceutical Filler and Capper can automatically track and correct the error caused by the change of material specific gravity and material level by photoelectric switch control. Pharmaceutical Filler and Capper are simple in design, made of stainless steel, easy to clean, and more convenient for users to use.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer, the quality of our Pharmaceutical Filler and Capper and services and our integrity is widely praised at home and abroad, we have obtained ISO9001 quality management system certification, and some of our products have passed CE certification. Wenzhou Zongwan Intelligent Machinery Co., Ltd. has obtained more than 20 invention patents and utility model patents. If you are interested in Pharmaceutical Filler and Capper, you can contact us at www.cnzpack.com. We are looking forward to your visit and hope to cooperate with you.

Capping Machine is filling equipment specially designed for new oral liquid easy-pull bottles. The design is reasonable, the structure is simple, the operation is convenient, and a mechanical stop filling device is provided for lack of bottles. So what are the adjustment methods of the Capping Machine? Let's take a look together next.

This is the content list:

l Capping Machine feeding half adjustment

l Matters needing attention in discharging

l Adjustment of the locking device

l Vibrator adjustment

Capping Machine feeding half adjustment

Adjust the bottle blocking plate on the feeding half of the Capping Machine upwards to shorten the adaptation to the bottle feeding stroke. Adjust downwards to make the Capping Machine adapt to the extension of the bottle feeding stroke. Adjust the positioning bottle position left and right to align the bottle position when the movable tooth is running, so that the bottle can be fed into the positioning tooth smoothly. Adjust the bottle blocking plate of the Capping Machine so that the width of the bottle inlet is about 22 mm.

Adjust the perfusion Capping Machine component. The role of the perfusion Capping Machine component is to make the liquid medicine be delivered to each easy-pull bottle in time through the dosing device, one-way valve, and needle. Therefore, the needle must enter the bottle mouth properly and the filling time must be appropriate. Adjust the Capping Machine side cam to rotate clockwise or counterclockwise so that the needle is inserted into the bottle mouth just after the empty bottle enters the toothed position. And lift the needle before leaving the toothed position. The filling time of the Capping Machine is adjusted. Turn the cam clockwise or reverse the adjustable needle into the bottle mouth and start filling immediately, and stop filling before the needle leaves the bottle mouth.

Matters needing attention in discharging

Since the Capping Machine is an easy-pull bottle filling and locking device, the discharging has been capped and sealed. To prevent the locked bottle from overturning, it must be placed on the Capping Machine discharge hopper before the first bottle is discharged. Several empty bottles can be transported to the discharge hopper smoothly to keep the locked bottles and sent to the next process with the bottle hopper.

Adjustment of the locking device

Capping Machine capping time adjustment, adjust the cam rotation angle. When the filling liquid bottle enters the locking tooth position, the locking shaft has moved and left the bottle cap before the moving tooth approaches the bottle. The capping pressure is adjusted, and the capping pressure is adjusted. The size of the cap pressure is directly related to the quality of the lock. If the pressure is too high to break the easy-pull bottle, and the pressure is too small, it will affect the sealing performance. Therefore, the nut should be adjusted according to the actual average height of the easy-pull bottle to adjust the pressure to the best.

Capping Machine blade action time adjustment, the blade should be close to the bottleneck before the end of the capping, otherwise, the locking effect of some short bottles cannot be achieved. Loosen the nut during adjustment, and adjust the shaft and up and down to make the blade action time sooner or later. When adjusting the lock of the Capping Machine, pay attention to the locking of the nuts after the adjustment of each department. The easy-pull bottle must be used for the initial valve test. The average height must be taken. Irregular easy-pull bottles cannot enter the lock to avoid damage to the parts.

Vibrator adjustment

The Capping Machine adopts the principle of electromagnetic oscillation to drop the bottle cap to the proper position along the track according to a certain movement trajectory. The vibrator is packaged separately when it leaves the factory, and the lower rail opening must be aligned with the movement rail of the easy-pull bottle when installed. To adjust the gap between the magnets of the Capping Machine, loosen the screw, open the cover, adjust the nut, and make the vibration of the Capping Machine low and fast.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It strictly controls the production of the Capping Machine. A large number of factory tests are carried out before Capping Machine leaves the factory to ensure product quality. If you are interested in Capping Machine, you can Contact Us, our website is www.cnzpack.com.

In our production and life, the Cartoning Machine is of great significance to us, but sometimes, the Cartoning Machine will fail, so what is the reason for the failure of the Cartoning Machine? Next, let us analyze it together.

This is the content list:

• Stop or stop between conveyor belts

• The carton cannot be sucked down

• The carton is not formed or ejected at the mouth of the box feeding template after being sucked

• Can't suck the instructions

• The paper rebounds during the suction process of the manual

• The manual does not fold well

• Uneven folding of the manual

• There are curls and creases after the manual is folded

• Manual stuck in the fence

Stop or stop between conveyor belts

1. Cartoning Machine shuts down at intervals to check if there is a shortage of materials and automatically starts up when supplemented.

2. Shut down the Cartoning Machine to check whether the power supply including the power supply part, the motor, or the governor is normal.

The carton cannot be sucked down

1. Whether the cartons of Cartons Machine are arranged neatly.

2. Whether the cartons of the Cartoning Machine are pasted together.

3. Whether the air pressure of the Cartoning Machine suction head is normal.

The carton is not formed or ejected at the mouth of the box feeding template after being sucked

1. Check if the cartons of Cartons Machine are too hard.

2. Check whether the position of the guide rod of the cartons placed by the Cartoning Machine and the box delivery template are not correct.

3. Check whether the small hook spring at the rear of the Cartoning Machine delivery template is deformed.

4. Check if the height of the suction head of the Cartoning Machine and the box delivery track is correct.

Can't suck the instructions

1. Whether the Cartoning Machine manual is deformed, causing the suction head to fail to suck.

2. Whether the suction head gas of the Cartoning Machine is parallel to the manual.

3. Whether the paper width of the Cartoning Machine manual is different, the error must be within 1mm. The stacking position of the manual should be adjusted to a difference of 0.5mm from the inner edge when the suction head rises to the high position.

4. The small paper-separating hook above the suction head of the Cartoning Machine origami moves too early. Generally, the small hook should be inserted into the gap between the paper and the paper before the suction head is about to drop. The height of the small hook is adjusted to be 0.5mm away from the suction head when it is in the high position.

The paper rebounds during the suction process of the manual

1. The foot-lifting action of the Cartoning Machine's manual was too early, and the manual was taken away by the foot support before being pulled down. The position of the feet of the Cartoning Machine is so that it does not touch the sucked manual when it is returned and it returns to the high position when the paper picking notch wheel has not pulled the paper.

2. Whether the matching speed of the Cartoning Machine suction head and paper picking wheel is the same. The suction head of the Cartoning Machine should be lowered first, and then the front part of the paper picking notch wheel should be pressed onto the paper.

The manual does not fold well

1. Check if the Cartoning Machine paper is deformed and bent, and if there are burrs.

2. Is there any foreign matter in the fence of the Cartoning Machine blocking the paper?

3. The gap between the opening of the Cartoning Machine fence and the folding stick is too large, causing the paper to come out.

4. Is the gap between Cartons Machine's folding sticks too large to hold the paper? Adjust the adjusting screws at both ends of the folding stick to reduce the gap. If the Cartoning Machine folding stick has been used for too long and worn out, the folding stick must be replaced.

Uneven folding of the manual

Check the Cartoning Machine to adjust the front and rear positions of the barriers in the fence to achieve the required folding size.

There are curls and creases after the manual is folded

1. Is the gap between the Cartoning Machine baffle and the folding stick too large? Adjust the middle position of the baffle and folding stick.

2. If the middle position of the Cartoning Machine baffle and the folding stick has been adjusted, and there is still a large gap, remove the positioning pins on the Cartoning Machine baffle and re-adjust until the gap does not feed paper.

Manual stuck in the fence

1. Whether the paper feeding gap of Cartoning Machine folding stick is too large and paper feeding is weak. The adjustment method is the same as above.

2. The installation position of the lower half of the Cartoning Machine fence is too long than the arc guide plate on it so that the paper cannot enter the folding stick below. Loosen all the fixing screws on the Cartoning Machine fence and adjust the board backward, but it should not be shorter than the upper guide plate and should be 1-3 mm longer than the guide plate. If it is shorter than the guide plate, the Cartoning Machine manual may go directly into the folding stick below without folding.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It will conduct a large number of tests before the Cartoning Machine leaves the factory to reduce the failure of the Cartoning Machine and provide warranty services. If you are interested in the Cartoning Machine, you can contact us Contact, our website is www.cnzpack.com.

Wenzhou Zungwan Intelligent Machine Co.,Ltd. is the professional equipment manufacturer to keep researching and developing the packing machinery for every type of liquid, powder, cream/ointment, fluid and half-fluid etc. materials. We have Obtained ISO9001 quality management system authentication and parts of our products have passed CE authentication. Our company has obtained more than 20 invention patents and utility model patents. The main products range from nail polish filling machine, perfume machine,perfume filling machine, powder serial automatically volume-measuring packing machine and inline capping machine, rotary capping machine and labeling machine, bottle unscrambler , screw capping machine ,tube filling and sealing machine, cartoning machine and other Packaging equipments.

So far we have more than 100 domestic customers and more than 400 foreign customers. The quality of our machines and our service as well as our integrity is acclaimed both in China and abroad. we will carry forward the spirit of "integrated innovation, and perseverance," discipline ourselves to be the first, and provide better and more perfect service for our new and old customers with enthusiasm and a new attitude.

The Cosmetic Filling Machine and Capping machine is a professional cosmetic filling and capping equipment, which can make the cap tighter without damaging the mouth of the bottle and effectively protect the cosmetics from contact with the outside world. Next, let's take a look at the use and maintenance of the Cosmetic Filling machine and the capping machine. Here are some answers.

Here is the content list:

l Instructions for use of Cosmetic Filling machine And Capping machine.

l How is the daily maintenance of the Cosmetic Filling machine And Capping machine?

Instructions for use of Cosmetic Filling machine And Capping machine.

First, because the Cosmetic Filling Machine and Capping machine is an automated machine, the dimensions of the pop-up bottle, bottle liner, and bottle cap are required to be uniform. Second, before driving, you must first use the crank handle to turn the machine to see if there is any abnormality in the rotation, and then you can drive after it is confirmed that it is normal. Third, when adjusting the machine, the tools should be used appropriately. It is strictly forbidden to use excessive tools or excessive force to dismantle the parts to avoid damage to the machine parts or affect the performance of the machine. Fourth, the Cosmetic Filling machine and the Capping machine must be kept clean. Before the shift, all parts of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department. It should be scrubbed once a week, especially the areas that are not easily cleaned in normal use or blown with compressed air.

How is the daily maintenance of the Cosmetic Filling machine And Capping machine?

First, the Cosmetic Filling Machine and the Capping machine has strict requirements for the placement environment and must ensure the indoor humidity is moderate, ventilated, and hygienic. Because the Cosmetic Filling Machine and Capping machine is a mechanical device, after all, the raw materials are some steel electromechanical, etc. It is easy to rust when placed in a humid environment, and a closed environment is not conducive to the heat dissipation of the equipment during operation. Second, you must ensure that the power supply is normal and the grounding wire is safe before use. Voltage instability can cause considerable damage to the machine. Third, the non-woven soft cloth and cleaning agent must be added to wipe off the oil or dirt and wipe dry before the Cosmetic Filling machine and capping machine are operated. After use, take out all the remaining materials to prevent the materials from corroding the equipment and scrub them clean. Periodically clean the invisible dust and garbage in the chassis. And adhere to the tightness of the mechanical parts. Fourth, clean up the machine regularly. Many companies conduct major maintenance on machinery and equipment once a year in autumn. Fifth, add lubricating oil to the mechanical components of the Cosmetic Filling machine and Capping machine regularly to reduce frictional resistance and make the machine run faster.

Our official website is https:// www.cnzpack.com/. If you are engaged in work related to Cosmetic Filling machines and Capping machines or want to learn more about our company, you can communicate with us on the website.

Celebrate the 10th anniversary of ZUNGWAN intelligent machine

——A letter from ZUNGWAN machine to you

Hello, partners, customers and friends of ZUNGWAN machine!

April 12 is the 10th anniversary of the establishment of ZUNGWAN intelligent machine. I'm 10 years old. From April 12, 2011 when I officially got my birth certificate (business license) to today, I've accompanied my close partners and colleagues through 10 spring, summer, autumn and winter, 10 special birthdays, and cooperated with more than 200 large, medium and small enterprises, companies and factories at home and abroad, It has sold more than 2000 automatic filling and sealing machines, more than 1000 automatic filling and capping machines, more than 3000 semi-automatic filling machines and more than 500 filling and packaging production lines.

My name is Wenzhou ZUNGWAN Intelligent Machine Co., Ltd. now has more than 50 employees. I am a well-known brand enterprise specializing in the R & D, production and sales of hose filling and sealing machine, aluminum tube filling and folding machine, various material filling and capping machine, full-automatic linear filling machine, capping machine, labeling machine, water cream filling and capping machine and other related packaging machinery and equipment supporting products, It has a complete and scientific quality management system. The enterprise integrity, company strength and product quality of ZUNGWAN Intelligent Machine have won the full support, trust and recognition of customers and friends at home and abroad.

Since the establishment of the company in 2011, our main sales and production staff have worked in the packaging machinery industry for more than 5 years. They have rich experience in R & D, production, sales and after-sales of cosmetics, skin care products and drug packaging production equipment. After successfully completing hundreds of enterprise order projects, Further promote our strategic sales of machinery and improve after-sales tracking service. In the next development period of the enterprise, it will participate more in the cooperation with famous brand companies, have a close relationship with cosmetics, skin care products, drugs and food enterprises, and create new brilliance in central machinery design, innovation and breakthrough with more like-minded people.

By combining the production technical strength of both supply and demand sides and using advanced machine professional knowledge, since 2011, we have been engaged in the sales of packaging machinery industry for more than 15 years. The chief engineer of filling and sealing machine production workshop, Potter and director Wu, who has been engaged in quality control for more than 20 years, have combined their own electronic pneumatic professional knowledge and years of technical training to launch various filling and sealing machines and filling capping machines, Plastic molding filling and sealing machine filling and sealing machine, fully meet the production requirements of customers and help customers create benefits; Time and again improve the service life of products and the simplicity of operation, so that the equipment I make is favored by enterprises, companies and factories at home and abroad.

I adhere to the enterprise oriented ideology and policy of "customer-oriented and product-based", so as to realize the integration of industrial chain, provide customers with multiple production engineering schemes, and provide packaging machinery and equipment with stable performance, excellent quality and reasonable price and immediate and thoughtful after-sales service, so as to solve actual production problems for customers with the most sincere attitude, Avoid unnecessary waste of expenses caused by enterprises. Strive to meet customers' purchase intention of value for money and value for money.

ZUNGWAN is the leading manufacturer of perfume and cosmetic filling machines and lines, providing all solutions from the smallest to the fastest machines (400 bpm) for a vast range of applications :

Perfumes (bottles, samples, miniatures), liquid Cosmetics (shampoo, conditioner, lotions, gel, serum, foam bath, liquid soap, shower gel, hair dye, nail varnish, foundation, makeup remover, suntan lotion, deodorant, roll-on, etc.) and Cosmetic creams (jars, lip-gloss, mascara).

Small Bag Machines. Block bottom bag machines, flat and satchel bag machines by our …

It is specially designed for 1~15ml test tube. 2. Working process: 2.1. Automatic bottle unscrambler. Put the bottles into the bottle storage and elevating system, and bottles will be transferred into vibrator disk (bottle unscrambler) and finally comes to the inlet of filling machine automati

ZHBL-1916H Intellectual High-viscosity Filler ZHFX-1936B Fully Automatic Capping Machine DTNX-200 High Speed Hand Sanitizer Filling and Capping Machine ZHJ-200 Automatic …

Automatic Electronic Counting Machine on sale manufacturers, find details about Automatic …

? Automatic machine firstly developed in CHINA by us. Features include automatic syringe nest-tub in-feeding, automatic paper-cover opening/throwing, automatic vacuum filling, automatic …

Face Cream Filling And Capping Machine Lotion Gel Filler Capper Machine Production Line, US

GEA's Bulk Powder fillers are designed to pack a wide variety of powdered products into flexible intermediate bulk containers (FIBC), bulk bags, big bags, jumbo bags, and super sacks, as well as rigid containers such as bins, boxes and totes. We offer three types of big bag fillers: the BF-300, BBS-S and BBS-D.

Automatic Perfume Filling Machine Get Best Quote Approx. Price: Rs 1.3 Lakh / Unit (s) Get Latest Price Product Details: To meet the diversified requirements of our prestigious clients, we are engaged in offering Automatic Perfume Filling Machine. Perfect for filling perfumes on bottles, these machines are widely used in cosmetic industries.