ZHG-50C Semi-Auto double head filling and Capping Machine factory- Factory Manufacturers Suppliers From China

Due to the particularity of the environment in which the Liquid Filling Machine equipment is used, the structure of the metal itself is prone to corrosion. The external environment such as temperature, humidity, and air will directly cause the metal to corrode. After the Liquid Filling Machine equipment is corroded, the color, appearance, and basic performance of the machine may change, which causes damage to the machine equipment and also causes a waste of energy, causing the company to suffer a greater loss. To reduce the damage of the Liquid Filling Machine caused by corrosion, we should do anti-corrosion work during design, production, and later use. So what are the anti-corrosion methods of Liquid Filling Machines? Let's take a look together next.

This is the content list:

• Selection of Liquid Filling Machine materials

• Liquid Filling Machine structure and process

• Liquid Filling Machine corrosion inhibitor

Selection of Liquid Filling Machine materials

Most of the Liquid Filling Machine equipment materials used in the manufacturing industry are carbon steel. The price of this kind of steel is relatively low, and at the same time, it is more convenient to purchase and easy to process. Such steel will not cause major corrosion when used in the ordinary working environment, and will not cause major harm to the use of Liquid Filling Machine equipment. But if it is used in an enterprise, its working environment may cause serious erosion.

Liquid Filling Machine structure and process

If the collective shape design of the Liquid Filling Machine components is too complicated or unreasonable, it may cause defects such as thermal stress, dust accumulation, Liquid Filling Machine stress, and liquid accumulation, which may lead to corrosion in the connecting and unloading parts. From the perspective of anti-corrosion, comprehensive consideration is given to the design of the Liquid Filling Machine structure.

Liquid Filling Machine corrosion inhibitor

Liquid Filling Machine corrosion inhibitor is a chemical substance that is added to the corrosion inhibitor system at a proper concentration, which can significantly reduce the corrosion rate of the metal and has a small effect on the concentration of the corrosive agent. The amount of Liquid Filling Machine corrosion inhibitor is very small. Although it cannot change the corrosion tendency of the metal in the medium, it can form a protective film on the metal surface to slow down the corrosion rate of the metal, thereby reducing the corrosion of the metal.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream/ointment, fluid, and semi-fluid materials. So far, we have more than 100 domestic customers and more than 400 foreign customers. The quality of our machines and services as well as our integrity are widely praised at home and abroad. Before the Liquid Filling Machine leaves the factory, the corrosion resistance of the Liquid Filling Machine will be enhanced. If you are interested in the Liquid Filling Machine, you can contact us. Our website is www.cnzpack.com.

With its extremely high-efficiency performance, the automatic Labeling machine attracts a strong demand of users. Efficiency in the production of modern enterprises has become one of the important indicators that reflect the production capacity of enterprises. The demand for Labeling machines has promoted the progress of science and technology and has become the trend of modern product development. So what are the characteristics and advantages of the fully automatic Labeling machine? Let's take a look together next.

This is the content list:

l Automatic Labeling machine saves a lot of labor costs

l An automatic Labeling machine makes it easy to label goods

l The automatic Labeling machine is extremely efficient and meets the needs of modern enterprises

Automatic Labeling machine saves a lot of labor costs

The automatic Labeling machine saves a lot of labor costs. In the production process of labeling, most of the previous operations were done manually. Manual labeling takes up a lot of labor, the cost is high, and the recruitment and management of personnel are not so easy. The Labeling machine has solved this problem very well. It only needs to train machine operators with certain skills and invest a proper amount of automatic Labeling machines to replace manual labor to complete large-scale and heavy labeling work.

An automatic Labeling machine makes it easy to label goods

The automatic Labeling machine makes it easy to label goods. Manual labeling is difficult to guarantee the quality and effect of labeling. In the modern commodity society, people pay much attention to the appearance and packaging image of products. If the label is of poor quality and unsightly, it will be difficult to attract consumers' desire to buy. The products posted by the Labeling machine are more accurate in position, the surface is very flat, no wrinkles, and the products are more beautiful and generous.

The automatic Labeling machine is extremely efficient and meets the needs of modern enterprises

The automatic Labeling machine is extremely efficient and meets the needs of modern enterprises. With the advancement of technology, the Labeling machine has stronger vitality, higher competitiveness, and superior product labeling efficiency. It can reach thousands or even tens of thousands of labeling times per hour, which is a speed that cannot be imagined by single manpower.

A self-adhesive Labeling machine is relatively semi-automatic labeling or manual labeling. A fully automatic Labeling machine is leading the development direction of self-adhesive Labeling machines with its ultra-high efficiency performance and high-quality labeling effect! For the automatic Labeling machine, it is a big challenge. In the past, the packaging reason was very simple. To solve the quality assurance problem for the product, we did not inject more design factors. Our current packaging equipment not only extends the warranty time but also injects the artistic effect has been achieved so that people can experience the different experience that art brings us in the process of using it. It is impossible to break through the current development model without the help of external forces. We can't predict the direction of automatic Labeling machines, but by making up for the shortcomings of different industries, only the shortcomings can be achieved in a win-win situation, so that all industries can get a benign development. The use of automatic Labeling machines has also reached a new height in the protection of commodities, which just reflects the overall value of commodities. Therefore, the development of automatic Labeling machines is not limited to a small range.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. The company uses the advantages of the Labeling machine to produce a Labeling machine that is more in line with consumer needs. If you are interested in the Labeling machine, you can contact us. Our website is www.cnzpack.com.

The tube Filling machine And the Sealing machine are determined by multiple parameters. It is impossible to describe a Tube Filling machine And Sealing machine with any single parameter. Shaft power, blade displacement, pressure head, blade diameter, and filling speed are the five basic parameters that describe a Tube Filling Machine And Sealing machine. So, let's take a look at the principle of the Tube Filling machine And Sealing machine together. Here are some answers.

Here is the content list:

l Basic parameters.

l The shear rate of the fluid.

l Small slot and big slot.

Basic parameters.

The displacement of the blade is proportional to the flow rate of the blade itself, the first power of the blade speed, and the third power of the blade diameter. The shaft power consumed by the filling is proportional to the specific gravity of the fluid, the power standard of the blade itself, the third power of the speed, and the fifth power of the blade diameter. In the case of a certain power and blade form, the blade displacement and pressure head can be adjusted by changing the diameter of the blade and the matching of the speed. That is, the large diameter blade is equipped with a low-speed Tube Filling machine And a Sealing machine. High flow effect and low-pressure head, while the small diameter blade with high speed produces a higher pressure head and lower flow effect.

The shear rate of the fluid.

In the filling tank, the only way to make the micelles collide with each other is to provide a sufficient shear rate. According to the mechanism of the Tube Filling Machine And Sealing machine, it is because of the existence of fluid velocity difference that the fluid layers are mixed. Therefore, where the filling process always involves the fluid shear rate lhhaha620. Shear stress is a force that is the real cause of bubble dispersion and droplet breaking in filling applications. It must be pointed out that the shear rate at each point of the fluid in the entire stirred tank is not the same.

Small slot and big slot.

Experimental research shows that, as far as the blade area is concerned, no matter what type of blade, when the diameter of the blade is constant, the maximum shear rate and the average shear rate increase with the increase of the speed. However, when the rotation speed is constant, the relationship between the maximum shear rate and the average shear rate, and the diameter of the blade is related to the slurry type. When the rotation speed is constant, the maximum shear rate of the radial blade increases with the increase of the blade diameter, and the average shear rate has nothing to do with the diameter of the blade. These concepts about the shear rate of the blade area require special care in the design of the Tube Filling Machine And Sealing machine to reduce and enlarge. Because the small groove is compared with the large groove, the small groove Tube Filling Machine and Sealing machine often has the characteristics of high speed, small blade diameter, and low tip speed. The large groove Tube Filling Machine And Sealing machine often has the characteristics of low speed, large blade diameter, and high tip speed.

Our official website is https:// www.cnzpack.com/. If you are engaged in work related to the Tube Filling machine And Sealing machine, you can communicate with us on the website.

The Pharmaceutical Filler and Capper is no stranger to the health care industry, after all, it has a major impact on it. Pharmaceutical Filler and Capper can specially package various products to ensure that they can be sold properly in the market. The Pharmaceutical Filler and Capper is no longer the traditional equipment that people know, but a smarter and more efficient one. So how does the new generation of Pharmaceutical Filler and Capper work? Let's take a look together.

This is the content list:

l Highlights of Pharmaceutical Filler and Capper

l Performance of the Pharmaceutical Filler and Capper

Highlights of Pharmaceutical Filler and Capper

First of all, the Pharmaceutical Filler and Capper are categorized so that they can provide the right equipment for the different needs of the pharmaceutical industry. Pharmaceutical Filler and Capper are divided into quantitative and fully automatic, both of which are very popular. Pharmaceutical Filler and Capper have an advanced control system, accurate filling quantity, reliable performance, and beautiful appearance, which is ideal for freeze-dried preparation, liquid preparation, and blood products. Pharmaceutical Filler and Capper are suitable for matching with the linkage production line. The filling volume is controlled by a computer, the filling accuracy of the peristaltic pump is high, the range of adjusting dose is large, and it is suitable for various viscosities. Pharmaceutical Filler and Capper's filling needle does not come into contact with the drug and is free of contamination. Peristaltic pump filling system is easy to clean and disinfect. No bottle is not filled, no bottle automatically stops and the bottle collapses. Pharmaceutical Filler and Capper automatically display and counts. A filling system with shrinkage function, no drip. Equipped with Mitsubishi frequency conversion mechanism. Variable frequency speed regulation. The whole machine is designed according to GMP requirements. The equipment tends to be intelligent to make the filling process easier.

Performance of Pharmaceutical Filler and Capper

Pharmaceutical Filler and Capper's performance is good on the one hand, Pharmaceutical Filler and Capper have a wide range of use, can have a certain degree of fluidity of the powder-like, granular materials for reasonable packaging. The Pharmaceutical Filler and Capper can automatically track and correct the error caused by the change of material specific gravity and material level by photoelectric switch control. Pharmaceutical Filler and Capper are simple in design, made of stainless steel, easy to clean, and more convenient for users to use.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer, the quality of our Pharmaceutical Filler and Capper and services and our integrity is widely praised at home and abroad, we have obtained ISO9001 quality management system certification, and some of our products have passed CE certification. Wenzhou Zongwan Intelligent Machinery Co., Ltd. has obtained more than 20 invention patents and utility model patents. If you are interested in Pharmaceutical Filler and Capper, you can contact us at www.cnzpack.com. We are looking forward to your visit and hope to cooperate with you.

In our production and life, the Cartoning Machine is of great significance to us, but sometimes, the Cartoning Machine will fail, so what is the reason for the failure of the Cartoning Machine? Next, let us analyze it together.

This is the content list:

• Stop or stop between conveyor belts

• The carton cannot be sucked down

• The carton is not formed or ejected at the mouth of the box feeding template after being sucked

• Can't suck the instructions

• The paper rebounds during the suction process of the manual

• The manual does not fold well

• Uneven folding of the manual

• There are curls and creases after the manual is folded

• Manual stuck in the fence

Stop or stop between conveyor belts

1. Cartoning Machine shuts down at intervals to check if there is a shortage of materials and automatically starts up when supplemented.

2. Shut down the Cartoning Machine to check whether the power supply including the power supply part, the motor, or the governor is normal.

The carton cannot be sucked down

1. Whether the cartons of Cartons Machine are arranged neatly.

2. Whether the cartons of the Cartoning Machine are pasted together.

3. Whether the air pressure of the Cartoning Machine suction head is normal.

The carton is not formed or ejected at the mouth of the box feeding template after being sucked

1. Check if the cartons of Cartons Machine are too hard.

2. Check whether the position of the guide rod of the cartons placed by the Cartoning Machine and the box delivery template are not correct.

3. Check whether the small hook spring at the rear of the Cartoning Machine delivery template is deformed.

4. Check if the height of the suction head of the Cartoning Machine and the box delivery track is correct.

Can't suck the instructions

1. Whether the Cartoning Machine manual is deformed, causing the suction head to fail to suck.

2. Whether the suction head gas of the Cartoning Machine is parallel to the manual.

3. Whether the paper width of the Cartoning Machine manual is different, the error must be within 1mm. The stacking position of the manual should be adjusted to a difference of 0.5mm from the inner edge when the suction head rises to the high position.

4. The small paper-separating hook above the suction head of the Cartoning Machine origami moves too early. Generally, the small hook should be inserted into the gap between the paper and the paper before the suction head is about to drop. The height of the small hook is adjusted to be 0.5mm away from the suction head when it is in the high position.

The paper rebounds during the suction process of the manual

1. The foot-lifting action of the Cartoning Machine's manual was too early, and the manual was taken away by the foot support before being pulled down. The position of the feet of the Cartoning Machine is so that it does not touch the sucked manual when it is returned and it returns to the high position when the paper picking notch wheel has not pulled the paper.

2. Whether the matching speed of the Cartoning Machine suction head and paper picking wheel is the same. The suction head of the Cartoning Machine should be lowered first, and then the front part of the paper picking notch wheel should be pressed onto the paper.

The manual does not fold well

1. Check if the Cartoning Machine paper is deformed and bent, and if there are burrs.

2. Is there any foreign matter in the fence of the Cartoning Machine blocking the paper?

3. The gap between the opening of the Cartoning Machine fence and the folding stick is too large, causing the paper to come out.

4. Is the gap between Cartons Machine's folding sticks too large to hold the paper? Adjust the adjusting screws at both ends of the folding stick to reduce the gap. If the Cartoning Machine folding stick has been used for too long and worn out, the folding stick must be replaced.

Uneven folding of the manual

Check the Cartoning Machine to adjust the front and rear positions of the barriers in the fence to achieve the required folding size.

There are curls and creases after the manual is folded

1. Is the gap between the Cartoning Machine baffle and the folding stick too large? Adjust the middle position of the baffle and folding stick.

2. If the middle position of the Cartoning Machine baffle and the folding stick has been adjusted, and there is still a large gap, remove the positioning pins on the Cartoning Machine baffle and re-adjust until the gap does not feed paper.

Manual stuck in the fence

1. Whether the paper feeding gap of Cartoning Machine folding stick is too large and paper feeding is weak. The adjustment method is the same as above.

2. The installation position of the lower half of the Cartoning Machine fence is too long than the arc guide plate on it so that the paper cannot enter the folding stick below. Loosen all the fixing screws on the Cartoning Machine fence and adjust the board backward, but it should not be shorter than the upper guide plate and should be 1-3 mm longer than the guide plate. If it is shorter than the guide plate, the Cartoning Machine manual may go directly into the folding stick below without folding.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It will conduct a large number of tests before the Cartoning Machine leaves the factory to reduce the failure of the Cartoning Machine and provide warranty services. If you are interested in the Cartoning Machine, you can contact us Contact, our website is www.cnzpack.com.

Now Bag Packing Machine is the most popular packaging equipment in the market, and it is used in all walks of life. Now the ubiquitous refractory materials, coffee, salt, MSG, potato chips, etc. are packed in a variety of packaging, then What are the general characteristics of a Bag Packing Machine? Let's take a look together next.

This is the content list:

l Standardization and modularization of Bag Packing Machine structure design

l Bag Packing Machine packaging speed increases

l High-precision structure movement of Bag Packing Machine

l Bag Packing Machine control is intelligent and flexible

Standardization and modularization of Bag Packing Machine structure design

When using a Bag Packing Machine to complete the packaging of different materials, the modular design of the original model can be used to quickly change the specifications or convert to other packaging models in a short time. The Bag Packing Machine is not the metering system that provides enough space.

Bag Packing Machine packaging speed increases

At present, the single-line packaging speed of the small Bag Packing Machine is generally 30-120 bags/min. Compared with the manual, the packaging speed is greatly accelerated. The Bag Packing Machine is more helpful for enterprises to realize automatic packaging and save time and cost.

High-precision structure movement of Bag Packing Machine

Because Bag Packing Machine adopts various new technologies, such as high-precision mechanical control of various actions through servo motors, encoders and digital control (NC), power load control PLC, etc., the filling and metering accuracy of the Bag Packing Machine is reduced. The bag-making accuracy has been improved.

Bag Packing Machine control is intelligent and flexible

Most Bag Packing Machines track and adjust various mechanical parameters through intelligent control instruments and menu-type software on the touch screen. The Bag Packing Machine electronic display shows the length of the bag, the packing speed, the net content of the filling and the packing output, etc., which can be understood at a glance. The standard color code tracking photoelectric system can ensure the correct printing patterns of the packaged products. In addition, Bag Packing Machine can perform online status monitoring and fault diagnosis analysis of the working process. Once a problem occurs, Bag Packing Machine will automatically stop and display the cause and solution of the fault.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream/ointment, fluid, and semi-fluid materials. The quality of our machines and services as well as our integrity are widely praised at home and abroad. We will carry forward the spirit of "comprehensive innovation and perseverance", self-discipline and strive for the first place, and provide new and old customers with better and more complete services with enthusiasm and a new attitude. The production of the Bag Packing Machine is strictly controlled. The company uses the characteristics of the Bag Packing Machine to improve it to meet the needs of consumers. If you are interested in Bag Packing Machine, you can contact us. Our website is www.cnzpack.com. We look forward to your coming and very much hope to cooperate with you.

In our daily life, Capping Machine plays a vital role for us, so what are the main work processes and precautions of the Capping Machine? Let's take a look together next.

This is the content list:

• The main workflow of Capping Machine

• How to carry out daily maintenance and maintenance of Capping Machine

• How to deal with common problems of Capping Machine　

The main workflow of Capping Machine

We know that after the plastic bottles are sorted by the Capping Machine, they enter the conveyor chain in a single row. In the filling station, the plunger pump injects the liquid in the container into the plastic bottle. After filling, the plastic bottle enters the index plate and stops accurately at the capping station. Manually place the cap of the Capping Machine at the entrance of the friction beltline, take out the capping claw, screw the cap claw, and squeeze the tube claw to complete the capping action. Then the plastic bottle exits the index plate and enters the conveyor chain, and enters the labeling station to complete the round bottle labeling.

How to carry out daily maintenance and maintenance of Capping Machine

1. Always keep the Capping Machine clean, especially for the electrical appliances on the switchboard, to prevent moisture and dust, and it is forbidden to change the program of the inverter and the program controller at will.　

2. The power supply voltage of the Capping Machine should be stable, not exceeding ±15%, the material temperature should be kept at 10℃-40℃, the ambient temperature should be kept at 5℃～40℃, and the temperature should be kept at 5～95%PH.　

3. The flowmeter used by the Capping Machine for spray filling is a precision instrument. Therefore, the oil must be precision filtered before it can be filled.　　

4. Turn off the power supply and oil inlet valve of the Capping Machine after finishing the work.　　

5. Pay attention to the cleanliness of the infrared sensor from the Capping Machine. Frequently wipe it clean with clean cotton. It is strictly forbidden for any object to approach the sensor during the working process, and strong light should not be directly or reflected on the sensor, otherwise, it will prosper and malfunction.

6. Add cylinder lubricating oil to the pneumatic triplet regularly.　　

7. When the machine is not used for a long time, all parts should be wiped clean and covered with plastic or tarpaulin to prevent dust.

How to deal with common problems of Capping Machine

First, what should I do if the cylinder piston of the Capping Machine does not work? Confirm whether the safety emergency stop switch is safe. Confirm that the air supply switch of the Capping Machine is turned on. Check if the Capping Machine one-way signal valve is damaged.

Second, what should I do if the Capping Machine cylinder piston does not return after being pushed to the top? Confirm whether the moving target is in contact with the one-way valve.

Third, how to adjust the filling volume of the Capping Machine is inaccurate or not discharged?

Check whether the upper and lower throttle valves of the Capping Machine are closed, and increase the pumping speed of the throttle valve of the cylinder. Make sure that the Capping Machine quick-install tee is locked with a clamp. Confirm whether there are enough materials in the Capping Machine storage box. Make sure that the joints of the pipes of the Capping Machine are sealed.

Fourth, what should I do if the material of the Capping Machine flows out from the rear end of the cylinder? Check whether the sealing ring on the Capping Machine piston is worn. If it is worn, replace it and make sure that the piston and the piston rod are tight.

In addition to timely handling of problems, it is also necessary to do a good job of preventive work in advance. Doing a good job in daily maintenance can also reduce the failure rate of the Capping Machine. The daily maintenance and maintenance of the Capping Machine cannot be underestimated. This is a very important step. Daily maintenance on time can effectively extend the service life of the Capping Machine, improve the production efficiency of the enterprise, and keep Capping Machine in normal operation throughout the day, reducing manpower. The loss of material resources.

Wenzhou Zungwan Intelligent Machinery Co., Ltd.'s first-class product quality and efficient and quick after-sales service have created excellent products of "Zhonghuan". Products are in great demand in the domestic and foreign markets. Keep improving, develop to satisfy customers, and meet market demands are our eternal topic and our sincere commitment to customers. Therefore, Capping Machine is very popular among consumers. If you are interested in Capping Machine, you can contact us. Our website is www.cnzpack.com.

Bottle Unscrambler scientific maintenance and daily management institutionalization are very important. Scientific maintenance and the establishment of a daily management and use system have a very important role and significance for the actual use of mechanical products. It improves the standardization and performance of daily maintenance. It is more convenient for people to choose, especially it can be better suited to play the role of mechanical products in actual production. It is necessary to carry out reasonable maintenance and management of Bottle Unscrambler to improve the performance advantages of the product itself and let Bottle Unscrambler can help production in time during operation. So what are the precautions for Bottle Unscrambler? Let's take a look together next.

This is the content list:

l Things to do when installing Bottle Unscrambler

l Precautions when using Bottle Unscrambler

l Matters needing attention when cleaning the automatic Bottle Unscrambler

Things to do when installing Bottle Unscrambler

1. Before installing the Bottle Unscrambler, we need to check the Bottle Unscrambler thoroughly to see if the materials are complete and whether it is damaged. If you find a problem, please communicate with the manufacturer in time to solve it.

2. After checking the completion of the Bottle Unscrambler, follow the installation instructions to assemble the Bottle Unscrambler and adjust accordingly. Then add lubricating oil to the place that needs lubrication to ensure the flexibility of the Bottle Unscrambler.

3. After the test run Bottle Unscrambler, if it runs normally, it means that the installation of Bottle Unscrambler is completed.

Precautions when using Bottle Unscrambler

1. According to Bottle Unscrambler production conditions, choose to use a power supply that meets Bottle Unscrambler specifications.

2. To prevent electric shock, the Bottle Unscrambler must be well-grounded. Please equip the Bottle Unscrambler with a power socket with a ground wire.

3. After turning off the Bottle Unscrambler power switch, there is still strong voltage in some circuits in the electrical control of the machine. If the control circuit needs to be repaired, the power cord must be unplugged to avoid electric shock.

Matters needing attention when cleaning the automatic Bottle Unscrambler

1. If the company needs to disassemble and wash the Bottle Unscrambler, please do not turn off the air source and power supply.

2. Avoid electric shock to Bottle Unscrambler. When disassembling the Bottle Unscrambler, do not directly rinse the body with water, because the Bottle Unscrambler is equipped with electrical control components. If the components contact the water source, there is a risk of electric shock and may damage the Bottle Unscrambler components.

3. It is strictly forbidden to show the residues of the filled items on the Bottle Unscrambler, such as oil stains, paints, etc. The existence of these things will accelerate the corrosion of the Bottle Unscrambler and affect its service life. If any residual items are found, they should be cleaned up in time.

4. Lubricate the Bottle Unscrambler regularly, clean the Bottle Unscrambler every once in a while, and make a cleaning record for later review.

We have obtained ISO9001 quality management system certification, and some products have passed CE certification. The production of Bottle Unscrambler is strictly controlled. If you are interested in Bottle Unscrambler, you can contact us. Our website is www.cnzpack.com.

Lipstick Machines. S.S. 316 material is used in manufacturing of this vessel. Inner and outer mirror polish. Air tight clamp is provided for the lid. For the stirrer shaft entry a lid with ¾ opening hinge and slot window is provided. Filling Die Mould. Ask Price. Lipstick Flaming With Conveyor

1 Set (MOQ) AH-ZF1000 automatic liquid packing machine can be widely used for packing various kinds of air-free liquid, especially for bag packing of soy sauce, vinegar, fruit juice and other ...

1500-2000BPH Automatic single head small glass plastic bottle paste cream liquid filling filler machine.

Technical Specifications: Inserting-Speed in accordance with Length of Labelpaper Container Dimension: Φ30-120mm Labelpaper Length: 40-240mm Thickness: 0.035-0.08mm Material: PVC,PET,OPS Power Supply: Inserting Machine: 1Φ ,220V or 380V, 3KW Shrinking Tunnel: 1Φ ,220V or 380V, 50KW Dimension: Inserting Machine: L:2800mm,W:1200mm,H:2150mm

Lipstick Making Machine Lip Balm Lip Gloss Heating Filling Machine US

Automatic-cartoner companies ☆ Find Automatic-cartoner manufacturers, suppliers, exporters, factories and trading agents. Search Keywords. ... Proven capabilities in design, development

Nasal Spray Contract Manufacture. Our manufacturing suite boasts the following features: DEA …

Manual Tube Filling And Sealing Machine , Find Complete Details about Manual Tube Filling And Sealing Machine,Manual Tube Filling And Sealing Machine,Tube Filling And Sealing Machine,Manual Tube Filling And Sealing Machine from Filling Machines Supplier or Manufacturer-Guangzhou Western Packing Co., Limited