











They ordered two hand sanitizer filling lines, requiring a speed of 150 bottles per minute, from automatic bottle management - automatic filling - automatic cap management - automatic capping - automatic labeling.
The whole production line was designed, developed and produced by our company, and it took 70 days from the finalization of the contract to delivery. Because of the outbreak of New Crown epidemic in the U.S., we completed the delivery of the equipment ahead of schedule and flew it to the U.S.
We know that Labeling Machine brings great convenience to our production and life, so what are the working principles and performance characteristics of Labeling Machine? Let's go take a look next.
This is the content list:
l How the Labeling Machine works
l Performance characteristics of Labeling Machine
How the Labeling Machine works
First of all, the working principle of the Labeling Machine is to put the roll of labels in place, and then put the round bottle on the conveyor belt. The labeling head of the Labeling Machine is set at a fixed distance. The labeling wheel and the rotating shaft are used to move the label. Separate from the base film, it should be noted that the Labeling Machine label tape needs to be kept in a constant state during this operation.
Then, the Labeling Machine conveyor belt pushes the round bottle. When it is transferred to the area, the driving wheel will slow down and stop applying the label to the bottle. The Labeling Machine logo can be applied to the entire bottle or half of the bottle. The basic working principle is the same.
The above is the working principle of the Labeling Machine. At present, Labeling Machine has been widely used in the market, gradually replacing manual labeling, and the labeling speed of the prototype Labeling Machine is much higher than that of manual operation, and the accuracy is also higher. The cost of manual operation is lower than that of manual operation. Therefore, the circular Labeling Machine is more demanded by consumers.
Performance characteristics of Labeling Machine
1. The Labeling Machine is equipped with a double-labeling mechanism. Labeling Machine to ensure the accuracy of labeling, Labeling Machine double extrusion labeling can effectively eliminate air bubbles, to ensure that the label head and tail are tightly attached.
2. Labeling Machine intelligent control, automatic photoelectric tracking, Labeling Machine with no labeling, no label automatic correction and automatic detection of the label function, Labeling Machine to avoid wasting labels and missing labels.
3. Labeling Machine with elastic pressure top mechanism to ensure stable product delivery, Labeling Machine effectively eliminates the inherent error of the bottle height.
4. The Labeling Machine is equipped with an automatic bottle splitting mechanism, which automatically separates the spacing before the bottle guide, Labeling Machine to ensure the stability of the subsequent bottle guide, conveying, and labeling.
5. The Labeling Machine adopts a double-sided hard plastic synchronous guide chain to automatically ensure the neutrality of the bottle.
6. Labeling Machine has little requirement for workers to put bottles and assembly line to receive bottles, which greatly reduces the difficulty of workers' work or assembly line docking. Labeling Machines can be produced on a single machine or connected with assembly-line production.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It strictly controls the production of Labeling Machines and uses the working principle and performance characteristics of Labeling Machines to produce Labeling Machines that are more in line with consumer needs. If you are interested in Labeling Machines, you can contact us, our website is www.cnzpack.com.
In our production and life, Capping Machine is also called a Capping Machine, Capping Machine, or Capping Machine, which is used for screwing and unscrewing the caps of plastic bottles and glass bottles (molded bottles or tube bottles). equipment. Capping Machine is highly intelligent capping equipment with advanced technology, unique design, and easy operation. During the entire capping process, workers only need to place the cap on the mouth of the bottle, and then the bottle is automatically sent to the capping wheel and automatically tightened to complete the capping operation. The Capping Machine evacuates the packaging bottle and then tightens it, which prolongs the storage time of the packaging, reduces the failure rate of the Capping Machine, and improves the packaging efficiency of the Capping Machine. So what are the matters needing attention when operating Capping Machine correctly? Let's take a look together next.
This is the content list:
l Capping Machine rolling wheel adjustment
l Capping Machine lock wheel adjustment
l Capping Machine cap lock
l Capping Machine height adjustment
Capping Machine rolling wheel adjustment
Place the Capping Machine bottle on the bracket and raise the bracket to the highest point. First, loosen the lock nut to adjust the rolling wheel so that the (sprung) edge of the two Capping Machine rolling wheels is at the threading of the bottle. Click on it, then loosen the lock nut, and then adjust the adjusting screw so that the edges of the two rolling wheels are in contact with the cover, and a little pressure is appropriate, and then tighten the nut.
Capping Machine lock wheel adjustment
Adjust the two Capping Machine locking wheels, first loosen the locking nuts, adjust the locking wheels so that the edges of the two locking wheels are in contact with the lower edge of the bottle cap, a little pressure is appropriate, and then tighten the nuts (Note: Adjust Capping Machine Should be from loose to tight, adjust while pulling the lock).
Capping Machine cap lock
Loosen the top screw, remove the Capping Machine gland head, and then remove the entire Capping Machine lock head, install the appropriate plastic lock head on the cone sleeve, and then adjust the lifting height of the bracket to meet the working requirements.
Capping Machine height adjustment
Start the Capping Machine to lower the bracket to the lowest point, then place the bottle on the bracket, loosen the brake nut, turn the adjusting screw to raise the bracket, and then adjust the appropriate distance between the cap of the Capping Machine and the capping head (generally All are adjusted in place at the factory).
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer that continuously researches and develops various packaging machinery for liquid, powder, cream/ointment, fluid, and semi-fluid materials. We have obtained ISO9001 quality management system certification, and some products have passed CE certification. Our company has obtained more than 20 invention patents and utility model patents. If you are interested in Capping Machine, you can contact us, our website is www.cnzpack.com.
Wenzhou Zungwan Intelligent Machine Co.,Ltd. is the professional equipment manufacturer to keep researching and developing the packing machinery for every type of liquid, powder, cream/ointment, fluid and half-fluid etc. materials. We have Obtained ISO9001 quality management system authentication and parts of our products have passed CE authentication. Our company has obtained more than 20 invention patents and utility model patents. The main products range from nail polish filling machine, perfume machine,perfume filling machine, powder serial automatically volume-measuring packing machine and inline capping machine, rotary capping machine and labeling machine, bottle unscrambler , screw capping machine ,tube filling and sealing machine, cartoning machine and other Packaging equipments.
So far we have more than 100 domestic customers and more than 400 foreign customers. The quality of our machines and our service as well as our integrity is acclaimed both in China and abroad. we will carry forward the spirit of "integrated innovation, and perseverance," discipline ourselves to be the first, and provide better and more perfect service for our new and old customers with enthusiasm and a new attitude.
With its extremely high-efficiency performance, the automatic Labeling machine attracts a strong demand of users. Efficiency in the production of modern enterprises has become one of the important indicators that reflect the production capacity of enterprises. The demand for Labeling machines has promoted the progress of science and technology and has become the trend of modern product development. So what are the characteristics and advantages of the fully automatic Labeling machine? Let's take a look together next.
This is the content list:
l Automatic Labeling machine saves a lot of labor costs
l An automatic Labeling machine makes it easy to label goods
l The automatic Labeling machine is extremely efficient and meets the needs of modern enterprises
Automatic Labeling machine saves a lot of labor costs
The automatic Labeling machine saves a lot of labor costs. In the production process of labeling, most of the previous operations were done manually. Manual labeling takes up a lot of labor, the cost is high, and the recruitment and management of personnel are not so easy. The Labeling machine has solved this problem very well. It only needs to train machine operators with certain skills and invest a proper amount of automatic Labeling machines to replace manual labor to complete large-scale and heavy labeling work.
An automatic Labeling machine makes it easy to label goods
The automatic Labeling machine makes it easy to label goods. Manual labeling is difficult to guarantee the quality and effect of labeling. In the modern commodity society, people pay much attention to the appearance and packaging image of products. If the label is of poor quality and unsightly, it will be difficult to attract consumers' desire to buy. The products posted by the Labeling machine are more accurate in position, the surface is very flat, no wrinkles, and the products are more beautiful and generous.
The automatic Labeling machine is extremely efficient and meets the needs of modern enterprises
The automatic Labeling machine is extremely efficient and meets the needs of modern enterprises. With the advancement of technology, the Labeling machine has stronger vitality, higher competitiveness, and superior product labeling efficiency. It can reach thousands or even tens of thousands of labeling times per hour, which is a speed that cannot be imagined by single manpower.
A self-adhesive Labeling machine is relatively semi-automatic labeling or manual labeling. A fully automatic Labeling machine is leading the development direction of self-adhesive Labeling machines with its ultra-high efficiency performance and high-quality labeling effect! For the automatic Labeling machine, it is a big challenge. In the past, the packaging reason was very simple. To solve the quality assurance problem for the product, we did not inject more design factors. Our current packaging equipment not only extends the warranty time but also injects the artistic effect has been achieved so that people can experience the different experience that art brings us in the process of using it. It is impossible to break through the current development model without the help of external forces. We can't predict the direction of automatic Labeling machines, but by making up for the shortcomings of different industries, only the shortcomings can be achieved in a win-win situation, so that all industries can get a benign development. The use of automatic Labeling machines has also reached a new height in the protection of commodities, which just reflects the overall value of commodities. Therefore, the development of automatic Labeling machines is not limited to a small range.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. The company uses the advantages of the Labeling machine to produce a Labeling machine that is more in line with consumer needs. If you are interested in the Labeling machine, you can contact us. Our website is www.cnzpack.com.
After the Labeling machine sensor sends a signal that the labeling object is ready to be labeled, the drive wheel on the Labeling machine turns up. As the rolled label is in a tight state on the equipment, when the Labeling machine backing paper is tightly attached to the peeling plate and changes direction, the Labeling machine label is forced to disengage due to the rigidity of its material and is ready to be labeled. At this time, the labeling object is located just below the label, under the action of the labeling wheel, to achieve synchronous labeling. After the Labeling machine has finished labeling, the sensor under the roll label sends a stop signal, the drive wheel comes to a standstill, and a labeling cycle end. No matter which type of Labeling machine, the labeling process is roughly the same. The difference is that the installation position of the Labeling machine is different, the labeling object is conveyed differently and positioned differently, and the form of the labeling roller of the Labeling machine is also different. So, what are the Labeling machine's requirements for labels? Let's look at it together next.
This is the content list:
l Surface material
l Release force
l At the end of the paper
l Processing quality
Surface material
Labeling machine label stiffness is the key to labeling, so the Labeling machine surface material is required to have a certain strength and hardness. Labeling machine label stiffness and the thickness of the material and the area of the label, so the Labeling machine in the use of soft film material should be appropriate to increase its thickness, generally controlled at 100μm or more. Labeling machine thin paper materials, such as 60 ~ 70g/m2 labeling paper, are generally not suitable for the production of large labels, but suitable for processing into small labels, such as price tags used on the price tag. Labeling machine label stiffness is not good, it will cause labeling out of the label, or label and backing paper reward so that the automatic labeling failure.
Peel-off force
Labeling machine peel-off force is the force at which the label is separated from the backing paper by the Labeling machine. The Labeling machine release force is related to the type and thickness of the adhesive, the silicone coating on the surface of the backing paper, and the ambient temperature at the time of labeling. If the Labeling machine release force is too small, the label will easily fall off (leave the backing paper) during the conveying process. The Labeling machine's release force is too large, the label will be difficult to detach from the backing paper, and it will not be able to produce labels. The Labeling machine should be integrated control of the technical indicators so that the release force is maintained within a reasonable range.
At the end of the paper
Is also an important indicator to control automatic labeling. The requirements of the Labeling machine base paper surface silicon-coated evenly, the Labeling machine peeling force is consistent. Uniform thickness and good tensile strength ensure that the Labeling machine will not break when labeling. Uniform thickness and good light transmission of the Labeling machine ensure that the sensor can correctly identify the location of the label.
Processing quality
Requires that both sides of the Labeling machine backing paper after slitting should be flat and free of fracture to avoid the backing paper from breaking when the tension changes. Labeling machine die-cutting, to avoid cutting through the backing paper or damage to the silicone layer. If the Labeling machine backing paper and silicone coated layer are destroyed, the Labeling machine backing paper will break easily or the glue in the label will penetrate the backing paper. In addition, the static electricity in the web label must be eliminated before Labeling machine labeling, because static electricity will lead to Labeling machine labeling failure or labeling inaccuracy.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. Before the Labeling machine leaves the factory, it will conduct a large number of tests on the Labeling machine to maintain the healthy development of the Labeling machine market. If you are interested in the Labeling machine, you can contact us, our website is www.cnzpack.com.
Nowadays, the number and types of Cosmetic Filling machines And Capping Machines on the market are very large. Customers who use the Cosmetic Filling Machine And Capping machine for the first time will inevitably be a little confused when purchasing this equipment and don't know how to buy a cost-effective Cosmetic Filling machine And Capping machine suitable for their factory. Next, let's take a look at how to choose a Cosmetic Filling machine And a Capping Machine. Here are some answers.
l Here is the content list:
l Four purchasing principles for Cosmetic Filling Machine And Capping Machine.
l Precautions for purchasing Cosmetic Filling machine And Capping machine.
Four purchasing principles for Cosmetic Filling Machine And Capping Machine.
First, high-cost performance is the first principle. At present, the quality of the domestically produced Cosmetic Filling Machine And the Capping machine has been greatly improved than before, and it keeps pace with the imported machines. Second, choose as far as possible the famous brand Cosmetic Filling machine And Capping machine company with a long history, and the quality is guaranteed. If you purchase a low-quality Cosmetic Filling Machine And Capping machine, the amount of packaging film that will be wasted over time in daily production is not a small number. Third, if there is an on-site inspection, we must pay attention to the big aspects, but also the small details. The details often determine the quality of the whole machine. Fourth, in terms of after-sales service, we must have a good reputation and prompt after-sales service. For example, in beverage companies, summer is the peak season for production. If there is a problem with the machine during the production process that cannot be solved immediately, there will be a great loss. Wenzhou Zungwan Intelligent Machine Co., Ltd.'s after-sales service is super timely.
Precautions for purchasing Cosmetic Filling machine And Capping machine.
See whether the Cosmetic Filling machine And the Capping machine can meet a variety of bottle types. Many companies will choose to produce products with different packaging specifications and materials. In this case, bottle compatibility is very important. Because the investment in purchasing multiple types of equipment is too large, purchasing a Cosmetic Filling machine And a Capping Machine that can be used in one machine can effectively reduce the investment cost of the equipment.
Purchasing Cosmetic Filling Machine And Capping Machine is a one-time expense, while after-sales service is a daily expense. Many companies care about how much they spend on equipment when purchasing, and they rarely discuss and estimate the cost of after-sales service. This is a common omission in equipment procurement by many companies. When purchasing Cosmetic Filling Machine And a Capping Machine, it is necessary to compare the level of operating cost and comprehensively weigh the purchasing cost. The operating cost of the machine includes energy consumption, the number and quality of operators, the price and replacement frequency of spare parts and wearing parts, the cost of after-sales service engineers, the service life and depreciation of the equipment Rate, etc.
For more questions about Cosmetic Filling machines And Capping Machines, please consult Wenzhou Zungwan Intelligent Machine Co., Ltd. Our official website is https:// www.cnzpack.com/. Years of accumulated experience in the R&D and production industry will provide you with more product services and technical support!
With the continuous development of our production life, the emergence of Pharmaceutical Filler and Capper has brought great convenience to the industry. So what are the procedures and precautions for Pharmaceutical Filler and Capper? Let's take a look at it.
This is the content list:
l The operation method of Pharmaceutical Filler and Capper
l Safety rules for the use of Pharmaceutical Filler and Capper
l Precautions for Pharmaceutical Filler and Capper
The operation method of Pharmaceutical Filler and Capper
Pharmaceutical Filler and Capper installation precautions before use check, after the machine is installed, turn on the power, test runs the three-phase motor to ensure that the correct direction of operation, ensure that the pressure and flow of compressed air, check whether the motor, bearings, etc. need to be lubricated, no oil-free operation is strictly prohibited, normal before starting Pharmaceutical Filler and Capper. Filler And Capper at the same time, observe whether the fasteners of each part are loose, and only after the operation of each part is stable, can it be used normally. Check whether the function of the safety facilities of Pharmaceutical Filler and Capper is normal, check carefully whether there is water in all water tanks, whether the chainplate is stuck, whether there is debris on the conveyor belt, whether there are caps in the storage box, whether the water, power, and gas sources are connected before starting the machine. After all, conditions are ready, then close the main power QF, power indicator light, fault indicator, emergency stop indicator light is not on, then the start conditions are available, press the start button on the control box and the start switch at the filling, after the buzzer three warning, the whole machine starts running, take external washing, rinsing, filling fully automatic work mode, stop can be at the filling and control box press the stop button after the stop should turn off the main power.
Pharmaceutical Filler and Capper safety rules of use
1. No foreign objects (such as tools, rags, etc.) in Pharmaceutical Filler and Capper equipment.
2. Pharmaceutical Filler and Capper should not be allowed to have abnormal noise, if there is, it should be stopped immediately to check the reason.
3. All protective materials should be safe and reliable, it is strictly prohibited to wear clothing that may be hung by moving parts (such as scarves, bracelets, watches, etc.).
4. Long hair, should wear a hair cover.
5. Do not use water and other liquids to clean the electrical unit.
6. Cleaning should wear work clothes, gloves, glasses, etc., to prevent strong acid, strong alkali corrosion.
7. When Pharmaceutical Filler and Capper is running, someone must monitor it and do not approach the machine with tools or other objects.
8. Don't let the staff who are not related to the operation approach the installation of Pharmaceutical Filler and Capper.
Precautions for Pharmaceutical Filler and Capper
1、After unpacking Pharmaceutical Filler and Capper, first check whether the random technical information is complete and whether the machine is damaged in transportation, to solve the problem in time.
2、Install and adjust the feeding and discharging components according to the shape illustration in this manual.
3、Lubricate each lubrication point with new lubricant.
4、Turn the Pharmaceutical Filler and Capper by shaking the handle, check whether the Pharmaceutical Filler and Capper are running in the correct direction (facing the motor spindle in the counterclockwise direction), and the installation precautions of the Pharmaceutical Filler and Capper must be protected from grounding.
If you are interested in Pharmaceutical Filler and Capper, please contact us, our website is www.cnzpack.com.