











The Tube Filling machine And Sealing machine, as its name implies, is a machine that can be filled and sealed. There are different models for different industries. The more commonly used industries are chemicals, food, etc. Next, let's take a look at the introduction of the Tube Filling machine And Sealing machine. Here are some answers.
Here is the content list:
l Basic information of Tube Filling machine And Sealing machine
l Application performance of Tube Filling machine And Sealing machine.
l The main characteristics of the Tube Filling machine And Sealing machine.
Basic information of Tube Filling machine And Sealing machine
Tube Filling machine And Sealing machine adopts closed and semi-closed filling pastes and liquids. The seal has no leakage. The filling weight and volume are consistent. Filling, sealing, and printing can be completed at one time. It is suitable for medicine, daily chemicals, and food. Chemical and other fields of product packaging. Such as: filling and sealing of materials such as piping, ointment, hair dye, toothpaste, shoe polish, adhesive, AB glue, epoxy glue, neoprene, and other materials. Tube Filling machine And Sealing machine is an ideal, practical, and economical filling equipment for pharmaceutical, daily chemical, fine chemical, and other industries.
Application performance of Tube Filling machine And Sealing machine.
First, the transmission part of the Tube Filling machine And Sealing machine is enclosed under the platform, which is safe, reliable, and pollution-free. Second, the filling and sealing part is installed in a semi-closed non-static outer frame visible cover above the platform, which is easy to observe, operate and maintain. PLC control, man-machine dialogue interface. The rotary table is driven by a cam, with fast speed and high precision. Third, in the inclined-hung tube warehouse, the upper tube mechanism is equipped with a vacuum adsorption device, to ensure that the automatic upper tube accurately enters the tube seat. The photoelectric benchmarking workstation uses high-precision probes, stepping motors, etc. To control the hose pattern in the correct position. Fourth, the filling nozzle of the Tube Filling Machine And Sealing machine is equipped with a material cut-off mechanism to ensure the filling quality. No tube no filling. Fifth, the tail sealing adopts internal heating at the end of the tube, and external cooling and cooling devices; the typing workstation automatically prints the word code on the position required by the process. Sixth, fault protection alarm, no tube alarm, door open shutdown, overload shutdown; counting, and quantitative shutdown.
The main characteristics of the Tube Filling machine And Sealing machine.
First, the Tube Filling machine And Sealing machine has a compact design, easy to operate and adjust. Second, the driving part is fully enclosed. Third. The Tube Filling Machine And Sealing machine is a pneumatic tube washing and feeding machine with an intelligent temperature control cooling system. Fourth, the 316L stainless steel contacts comply with GMP standards. Fifth, the Tube Filling machine And Sealing machine provides overload protection. Sixth, the safety interlock is closed when the door is opened. Seventh, the automated workflow from tube installation to finished product output. Eighth, photoelectric induction automatic orientation.
If you want to buy Tube Filling machine And Sealing machine or want to know more about our company, you can communicate with us on the website. Our official website is http:// www.cnzpack.com/.
With the continuous development of our production life, the emergence of Pharmaceutical Filler and Capper has brought great convenience to the industry. So what are the procedures and precautions for Pharmaceutical Filler and Capper? Let's take a look at it.
This is the content list:
l The operation method of Pharmaceutical Filler and Capper
l Safety rules for the use of Pharmaceutical Filler and Capper
l Precautions for Pharmaceutical Filler and Capper
The operation method of Pharmaceutical Filler and Capper
Pharmaceutical Filler and Capper installation precautions before use check, after the machine is installed, turn on the power, test runs the three-phase motor to ensure that the correct direction of operation, ensure that the pressure and flow of compressed air, check whether the motor, bearings, etc. need to be lubricated, no oil-free operation is strictly prohibited, normal before starting Pharmaceutical Filler and Capper. Filler And Capper at the same time, observe whether the fasteners of each part are loose, and only after the operation of each part is stable, can it be used normally. Check whether the function of the safety facilities of Pharmaceutical Filler and Capper is normal, check carefully whether there is water in all water tanks, whether the chainplate is stuck, whether there is debris on the conveyor belt, whether there are caps in the storage box, whether the water, power, and gas sources are connected before starting the machine. After all, conditions are ready, then close the main power QF, power indicator light, fault indicator, emergency stop indicator light is not on, then the start conditions are available, press the start button on the control box and the start switch at the filling, after the buzzer three warning, the whole machine starts running, take external washing, rinsing, filling fully automatic work mode, stop can be at the filling and control box press the stop button after the stop should turn off the main power.
Pharmaceutical Filler and Capper safety rules of use
1. No foreign objects (such as tools, rags, etc.) in Pharmaceutical Filler and Capper equipment.
2. Pharmaceutical Filler and Capper should not be allowed to have abnormal noise, if there is, it should be stopped immediately to check the reason.
3. All protective materials should be safe and reliable, it is strictly prohibited to wear clothing that may be hung by moving parts (such as scarves, bracelets, watches, etc.).
4. Long hair, should wear a hair cover.
5. Do not use water and other liquids to clean the electrical unit.
6. Cleaning should wear work clothes, gloves, glasses, etc., to prevent strong acid, strong alkali corrosion.
7. When Pharmaceutical Filler and Capper is running, someone must monitor it and do not approach the machine with tools or other objects.
8. Don't let the staff who are not related to the operation approach the installation of Pharmaceutical Filler and Capper.
Precautions for Pharmaceutical Filler and Capper
1、After unpacking Pharmaceutical Filler and Capper, first check whether the random technical information is complete and whether the machine is damaged in transportation, to solve the problem in time.
2、Install and adjust the feeding and discharging components according to the shape illustration in this manual.
3、Lubricate each lubrication point with new lubricant.
4、Turn the Pharmaceutical Filler and Capper by shaking the handle, check whether the Pharmaceutical Filler and Capper are running in the correct direction (facing the motor spindle in the counterclockwise direction), and the installation precautions of the Pharmaceutical Filler and Capper must be protected from grounding.
If you are interested in Pharmaceutical Filler and Capper, please contact us, our website is www.cnzpack.com.
Wenzhou Zungwan Intelligent Machine Co.,Ltd. is the professional equipment manufacturer to keep researching and developing the packing machinery for every type of liquid, powder, cream/ointment, fluid and half-fluid etc. materials. We have Obtained ISO9001 quality management system authentication and parts of our products have passed CE authentication. Our company has obtained more than 20 invention patents and utility model patents. The main products range from nail polish filling machine, perfume machine,perfume filling machine, powder serial automatically volume-measuring packing machine and inline capping machine, rotary capping machine and labeling machine, bottle unscrambler , screw capping machine ,tube filling and sealing machine, cartoning machine and other Packaging equipments.
So far we have more than 100 domestic customers and more than 400 foreign customers. The quality of our machines and our service as well as our integrity is acclaimed both in China and abroad. we will carry forward the spirit of "integrated innovation, and perseverance," discipline ourselves to be the first, and provide better and more perfect service for our new and old customers with enthusiasm and a new attitude.
Tube filling machine and sealing machine is advanced equipment for sealing plastic pipes and aluminum-plastic pipes. It uses the thermal shock effect of the plastic tube produced by the ultrasonic sealing transducer and quickly melts the adhesive. The tube Filling machine And the Sealing machine does not need to add any additives, even if the surface is contaminated, it will not affect the sealing effect. Next, let's take a look at the advantages and applications of the Tube Filling machine And Sealing machine. Here are some answers.
Here is the content list:
Advantages of Tube Filling machine And Sealing machine.
Application field of Tube Filling machine And Sealing machine.
First, the servo motor controls the filling, and 8 nozzles are filled at the same time. Second, the Tube Filling Machine And the Sealing machine can achieve fast cleaning, fast adjustment, and step-less adjustment of the volume cylinder speed. The tube Filling machine And the Sealing machine is suitable for filling different specifications and different liquids. Third, the filling volume only needs to be adjusted once, each volume cylinder is fine-tuned, the filling accuracy is high and the consistency is good. The contact material part is 316L stainless steel and silicon rubber, which meets the GMP standard. Fourth, the filling piston-cylinder adopts imported geared motor step-less speed regulation, which is suitable for aqueous liquids and viscous liquids. Fifth, imported electromagnetic clutches and brakes eliminate inertia and high filling accuracy. Sixth, the man-machine interface communicates with the PLC. You can debug the device and change the type with simple settings on the screen. Seventh, bottling, positioning, filling, and discharging are all automatic. If the bottle is not in the correct position, the bottle is blocked, or the filling tube is not inserted into the bottle during filling, the equipment will automatically protect and continue to operate after troubleshooting.
Tube filling machine and sealing machine is mainly used to fill ointment or viscous fluid materials into aluminum tubes, plastic tubes, or composite tubes. Then seal the end of the tube. The Tube Filling machine And Sealing machine adopts a new type of stainless steel butterfly valve dosing pump and a screw fine adjustment device. In addition, the Tube Filling Machine And Sealing machine is widely used for filling, sealing, and batch number printing of aluminum tube packaging products in cosmetics, toothpaste, ointment, food, shoe polish, adhesives, etc. Tube Filling machines And Sealing machines can also be widely used in product packaging in medicine, daily chemical, food, chemical, and other industries. Such as ointment, adhesive, silica gel, AB glue, skin cream, hair dye, shoe polish, toothpaste, and other liquid or paste-like materials filling and sealing.
Our official website is https:// www.cnzpack.com/. If you are engaged in work related to Tube Filling machine And Sealing machine or want to know more about our company, you can communicate with us on the website. Our company adheres to the corporate culture of "quality-oriented, customer first", and has always made unremitting efforts to become a professional Tube Filling machine And Sealing machine supplier in the industry.
In our production and life, the Cartoning Machine is of great significance to us, but sometimes, the Cartoning Machine will fail, so what is the reason for the failure of the Cartoning Machine? Next, let us analyze it together.
This is the content list:
Stop or stop between conveyor belts
The carton cannot be sucked down
The carton is not formed or ejected at the mouth of the box feeding template after being sucked
Can't suck the instructions
The paper rebounds during the suction process of the manual
The manual does not fold well
Uneven folding of the manual
There are curls and creases after the manual is folded
Manual stuck in the fence
1. Cartoning Machine shuts down at intervals to check if there is a shortage of materials and automatically starts up when supplemented.
2. Shut down the Cartoning Machine to check whether the power supply including the power supply part, the motor, or the governor is normal.
1. Whether the cartons of Cartons Machine are arranged neatly.
2. Whether the cartons of the Cartoning Machine are pasted together.
3. Whether the air pressure of the Cartoning Machine suction head is normal.
1. Check if the cartons of Cartons Machine are too hard.
2. Check whether the position of the guide rod of the cartons placed by the Cartoning Machine and the box delivery template are not correct.
3. Check whether the small hook spring at the rear of the Cartoning Machine delivery template is deformed.
4. Check if the height of the suction head of the Cartoning Machine and the box delivery track is correct.
1. Whether the Cartoning Machine manual is deformed, causing the suction head to fail to suck.
2. Whether the suction head gas of the Cartoning Machine is parallel to the manual.
3. Whether the paper width of the Cartoning Machine manual is different, the error must be within 1mm. The stacking position of the manual should be adjusted to a difference of 0.5mm from the inner edge when the suction head rises to the high position.
4. The small paper-separating hook above the suction head of the Cartoning Machine origami moves too early. Generally, the small hook should be inserted into the gap between the paper and the paper before the suction head is about to drop. The height of the small hook is adjusted to be 0.5mm away from the suction head when it is in the high position.
1. The foot-lifting action of the Cartoning Machine's manual was too early, and the manual was taken away by the foot support before being pulled down. The position of the feet of the Cartoning Machine is so that it does not touch the sucked manual when it is returned and it returns to the high position when the paper picking notch wheel has not pulled the paper.
2. Whether the matching speed of the Cartoning Machine suction head and paper picking wheel is the same. The suction head of the Cartoning Machine should be lowered first, and then the front part of the paper picking notch wheel should be pressed onto the paper.
1. Check if the Cartoning Machine paper is deformed and bent, and if there are burrs.
2. Is there any foreign matter in the fence of the Cartoning Machine blocking the paper?
3. The gap between the opening of the Cartoning Machine fence and the folding stick is too large, causing the paper to come out.
4. Is the gap between Cartons Machine's folding sticks too large to hold the paper? Adjust the adjusting screws at both ends of the folding stick to reduce the gap. If the Cartoning Machine folding stick has been used for too long and worn out, the folding stick must be replaced.
Check the Cartoning Machine to adjust the front and rear positions of the barriers in the fence to achieve the required folding size.
1. Is the gap between the Cartoning Machine baffle and the folding stick too large? Adjust the middle position of the baffle and folding stick.
2. If the middle position of the Cartoning Machine baffle and the folding stick has been adjusted, and there is still a large gap, remove the positioning pins on the Cartoning Machine baffle and re-adjust until the gap does not feed paper.
1. Whether the paper feeding gap of Cartoning Machine folding stick is too large and paper feeding is weak. The adjustment method is the same as above.
2. The installation position of the lower half of the Cartoning Machine fence is too long than the arc guide plate on it so that the paper cannot enter the folding stick below. Loosen all the fixing screws on the Cartoning Machine fence and adjust the board backward, but it should not be shorter than the upper guide plate and should be 1-3 mm longer than the guide plate. If it is shorter than the guide plate, the Cartoning Machine manual may go directly into the folding stick below without folding.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It will conduct a large number of tests before the Cartoning Machine leaves the factory to reduce the failure of the Cartoning Machine and provide warranty services. If you are interested in the Cartoning Machine, you can contact us Contact, our website is www.cnzpack.com.
Capping Machine is filling equipment specially designed for new oral liquid easy-pull bottles. The design is reasonable, the structure is simple, the operation is convenient, and a mechanical stop filling device is provided for lack of bottles. So what are the adjustment methods of the Capping Machine? Let's take a look together next.
This is the content list:
l Capping Machine feeding half adjustment
l Matters needing attention in discharging
l Adjustment of the locking device
l Vibrator adjustment
Capping Machine feeding half adjustment
Adjust the bottle blocking plate on the feeding half of the Capping Machine upwards to shorten the adaptation to the bottle feeding stroke. Adjust downwards to make the Capping Machine adapt to the extension of the bottle feeding stroke. Adjust the positioning bottle position left and right to align the bottle position when the movable tooth is running, so that the bottle can be fed into the positioning tooth smoothly. Adjust the bottle blocking plate of the Capping Machine so that the width of the bottle inlet is about 22 mm.
Adjust the perfusion Capping Machine component. The role of the perfusion Capping Machine component is to make the liquid medicine be delivered to each easy-pull bottle in time through the dosing device, one-way valve, and needle. Therefore, the needle must enter the bottle mouth properly and the filling time must be appropriate. Adjust the Capping Machine side cam to rotate clockwise or counterclockwise so that the needle is inserted into the bottle mouth just after the empty bottle enters the toothed position. And lift the needle before leaving the toothed position. The filling time of the Capping Machine is adjusted. Turn the cam clockwise or reverse the adjustable needle into the bottle mouth and start filling immediately, and stop filling before the needle leaves the bottle mouth.
Matters needing attention in discharging
Since the Capping Machine is an easy-pull bottle filling and locking device, the discharging has been capped and sealed. To prevent the locked bottle from overturning, it must be placed on the Capping Machine discharge hopper before the first bottle is discharged. Several empty bottles can be transported to the discharge hopper smoothly to keep the locked bottles and sent to the next process with the bottle hopper.
Adjustment of the locking device
Capping Machine capping time adjustment, adjust the cam rotation angle. When the filling liquid bottle enters the locking tooth position, the locking shaft has moved and left the bottle cap before the moving tooth approaches the bottle. The capping pressure is adjusted, and the capping pressure is adjusted. The size of the cap pressure is directly related to the quality of the lock. If the pressure is too high to break the easy-pull bottle, and the pressure is too small, it will affect the sealing performance. Therefore, the nut should be adjusted according to the actual average height of the easy-pull bottle to adjust the pressure to the best.
Capping Machine blade action time adjustment, the blade should be close to the bottleneck before the end of the capping, otherwise, the locking effect of some short bottles cannot be achieved. Loosen the nut during adjustment, and adjust the shaft and up and down to make the blade action time sooner or later. When adjusting the lock of the Capping Machine, pay attention to the locking of the nuts after the adjustment of each department. The easy-pull bottle must be used for the initial valve test. The average height must be taken. Irregular easy-pull bottles cannot enter the lock to avoid damage to the parts.
Vibrator adjustment
The Capping Machine adopts the principle of electromagnetic oscillation to drop the bottle cap to the proper position along the track according to a certain movement trajectory. The vibrator is packaged separately when it leaves the factory, and the lower rail opening must be aligned with the movement rail of the easy-pull bottle when installed. To adjust the gap between the magnets of the Capping Machine, loosen the screw, open the cover, adjust the nut, and make the vibration of the Capping Machine low and fast.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. It strictly controls the production of the Capping Machine. A large number of factory tests are carried out before Capping Machine leaves the factory to ensure product quality. If you are interested in Capping Machine, you can Contact Us, our website is www.cnzpack.com.
There is already a lot of knowledge about the Labeling Machine in the market, but the Labeling Machine will appear crooked in the process of using it. How should this be solved? Let's take a look together next.
This is the content list:
Reasons for Labeling Machine crooked during use
Labeling Machine appears to "post crooked" solution
Why does Labeling Machine post crookedly during use? There are two factors: one is running in an environment that is not suitable for Labeling Machine work, and the other is the lack of maintenance of Labeling Machine equipment. The round Labeling Machine adopts self-adhesive roll labeling paper, and the labeling adopts the rolling method to complete the labeling process. The self-adhesive Labeling Machine is clean and hygienic, non-mold, beautiful, and firm after labeling, and will not fall off by itself, and production efficiency Higher merits. If you can do both of these things, you can eliminate the problem of inaccurate labeling.
First, stop the Labeling Machine, and then inspect whether the labeling heads on both sides of the Labeling Machine are loose. Use the tools configured by the manufacturer to stabilize the Labeling Machine. Check whether the Labeling Machine wraps the label's trays for looseness or uneven rotation speed. Add engine oil to lubricate. Round bottle Labeling Machine realizes labeling or filming on the circumferential surface of cylindrical and conical products, such as glass bottles, plastic bottles, etc. It can realize circumferential, semicircular, circumferential double-sided, circumferential positioning labeling and other functions, mainly vertical There are two ways of labeling and horizontal labeling. Then inspect the parameters of the Labeling Machine operating system to avoid labeling different products under the same parameters of the Labeling Machine. Finally, adjust the labeling head and place the labeling product separately. When the conveyor belt is conveyed, whether the Labeling Machine shakes or shakes the first two These steps must be performed after the Labeling Machine stops. If the above two cannot solve the labeling problem of the Labeling Machine, please do not disassemble and replace the internal parts of the device privately. You need to transfer the professional to repair the Labeling Machine.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. So far, we have more than 100 domestic customers and more than 400 foreign customers. The quality of our Labeling Machine and service as well as our integrity are widely praised at home and abroad. We will carry forward the spirit of "comprehensive innovation and perseverance", self-discipline and strive for the first place, and provide new and old customers with better and more complete services with enthusiasm and a new attitude. It can be seen that we have developed well in the quality of Labeling Machine products. Labeling Machine's first-class product quality and efficient and fast after-sales service have created excellent products of "Zhonghuan". If you are interested in Labeling Machine, you can contact us, our website is www.cnzpack.com. I look forward to your coming and hope to cooperate with you.
Pharmaceutical Filler and Capper, whether semi-automatic or fully automatic, will encounter more or less in the process of using different places of failure, in the face of Pharmaceutical Filler and Capper's special parts of the failure, how do we find the problem as soon as possible and solve it? Let's take a look at it.
This is the content list:
l Pharmaceutical Filler and Capper's PLC failure
l Pharmaceutical Filler and Capper's Magnetic Switch Failure
l Pharmaceutical Filler and Capper solenoid valve failure
Pharmaceutical Filler and Capper PLC Failure
If the point controls Pharmaceutical Filler and Capper, the fault phenomenon is that the motor runs after the signal start Pharmaceutical Filler and Capper, but the motor does not stop running after the stop signal is issued. And Capper only stops running when the PLC is powered down. If the point controls the solenoid valve. The fault phenomenon is that the solenoid valve coil is not energized, and the cylinder is not reset. If the PLC of Pharmaceutical Filler and Capper is hit with external force to make the sticking point separate, it can assist to determine the fault of Pharmaceutical Filler and Capper.
Pharmaceutical Filler and Capper's magnetic switch failure
Pharmaceutical Filler and Capper's magnetic switch is used to detecting the position of the cylinder and control the cylinder travel. The four cylinders of laminating, pushing, pressing, and fusing knife are interrelated, and the magnetic switch is used to detect and control their positions. Pharmaceutical Filler and Capper failure is mainly manifested as the subsequent cylinders do not move, because the cylinder speed of Pharmaceutical Filler and Capper is faster, which causes the magnetic switch cannot detect the signal. Such as pushing the package cylinder speed is too fast, after pushing the package reset, the pressure package and fusion knife cylinder do not move.
Solenoid valve failure of Pharmaceutical Filler and Capper
Pharmaceutical Filler and Capper solenoid valve failure is mainly manifested as the cylinder does not move or does not reset, the reason is that Pharmaceutical Filler and Capper cylinder solenoid valve cannot change direction or tampering air. If the solenoid valve falters, the air pressure of Pharmaceutical Filler and Capper can't reach the working pressure because the inlet and outlet air paths are connected, and the knife beam doesn't rise to the place. the proximity switch of Pharmaceutical Filler and Capper knife beam protection doesn't work, and the precondition of full machine operation is not established. Pharmaceutical Filler and Capper does not operate, which is easily confused with an electrical fault. Solenoid valve air leakage sound, listen carefully to the source of sound and hand search for air leakage points, generally can easily identify the air leakage solenoid valve.
Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer, with first-class product quality and efficient and fast after-sales service, forging the excellent products of "Central". Pharmaceutical Filler and Capper will undergo a lot of product testing before leaving the factory to reduce the probability of failure of Pharmaceutical Filler and Capper, and also provide customers with high-quality Pharmaceutical Filler and Capper warranty service. If you are interested in Pharmaceutical Filler and Capper, you can contact us, our website is www.cnzpack.com.