Lotion cream filling&capping machine- Factory Manufacturers Suppliers From China

They ordered two hand sanitizer filling lines, requiring a speed of 150 bottles per minute, from automatic bottle management - automatic filling - automatic cap management - automatic capping - automatic labeling.

The whole production line was designed, developed and produced by our company, and it took 70 days from the finalization of the contract to delivery. Because of the outbreak of New Crown epidemic in the U.S., we completed the delivery of the equipment ahead of schedule and flew it to the U.S.

With the continuous development of our production life, the emergence of Pharmaceutical Filler and Capper has brought great convenience to the industry. So what are the procedures and precautions for Pharmaceutical Filler and Capper? Let's take a look at it.

This is the content list:

l The operation method of Pharmaceutical Filler and Capper

l Safety rules for the use of Pharmaceutical Filler and Capper

l Precautions for Pharmaceutical Filler and Capper

The operation method of Pharmaceutical Filler and Capper

Pharmaceutical Filler and Capper installation precautions before use check, after the machine is installed, turn on the power, test runs the three-phase motor to ensure that the correct direction of operation, ensure that the pressure and flow of compressed air, check whether the motor, bearings, etc. need to be lubricated, no oil-free operation is strictly prohibited, normal before starting Pharmaceutical Filler and Capper. Filler And Capper at the same time, observe whether the fasteners of each part are loose, and only after the operation of each part is stable, can it be used normally. Check whether the function of the safety facilities of Pharmaceutical Filler and Capper is normal, check carefully whether there is water in all water tanks, whether the chainplate is stuck, whether there is debris on the conveyor belt, whether there are caps in the storage box, whether the water, power, and gas sources are connected before starting the machine. After all, conditions are ready, then close the main power QF, power indicator light, fault indicator, emergency stop indicator light is not on, then the start conditions are available, press the start button on the control box and the start switch at the filling, after the buzzer three warning, the whole machine starts running, take external washing, rinsing, filling fully automatic work mode, stop can be at the filling and control box press the stop button after the stop should turn off the main power.

Pharmaceutical Filler and Capper safety rules of use

1. No foreign objects (such as tools, rags, etc.) in Pharmaceutical Filler and Capper equipment.

2. Pharmaceutical Filler and Capper should not be allowed to have abnormal noise, if there is, it should be stopped immediately to check the reason.

3. All protective materials should be safe and reliable, it is strictly prohibited to wear clothing that may be hung by moving parts (such as scarves, bracelets, watches, etc.).

4. Long hair, should wear a hair cover.

5. Do not use water and other liquids to clean the electrical unit.

6. Cleaning should wear work clothes, gloves, glasses, etc., to prevent strong acid, strong alkali corrosion.

7. When Pharmaceutical Filler and Capper is running, someone must monitor it and do not approach the machine with tools or other objects.

8. Don't let the staff who are not related to the operation approach the installation of Pharmaceutical Filler and Capper.

Precautions for Pharmaceutical Filler and Capper

1、After unpacking Pharmaceutical Filler and Capper, first check whether the random technical information is complete and whether the machine is damaged in transportation, to solve the problem in time.

2、Install and adjust the feeding and discharging components according to the shape illustration in this manual.

3、Lubricate each lubrication point with new lubricant.

4、Turn the Pharmaceutical Filler and Capper by shaking the handle, check whether the Pharmaceutical Filler and Capper are running in the correct direction (facing the motor spindle in the counterclockwise direction), and the installation precautions of the Pharmaceutical Filler and Capper must be protected from grounding.

If you are interested in Pharmaceutical Filler and Capper, please contact us, our website is www.cnzpack.com.

Bottle Unscrambler scientific maintenance and daily management institutionalization are very important. Scientific maintenance and the establishment of a daily management and use system have a very important role and significance for the actual use of mechanical products. It improves the standardization and performance of daily maintenance. It is more convenient for people to choose, especially it can be better suited to play the role of mechanical products in actual production. It is necessary to carry out reasonable maintenance and management of Bottle Unscrambler to improve the performance advantages of the product itself and let Bottle Unscrambler can help production in time during operation. So what are the precautions for Bottle Unscrambler? Let's take a look together next.

This is the content list:

l Things to do when installing Bottle Unscrambler

l Precautions when using Bottle Unscrambler

l Matters needing attention when cleaning the automatic Bottle Unscrambler

Things to do when installing Bottle Unscrambler

1. Before installing the Bottle Unscrambler, we need to check the Bottle Unscrambler thoroughly to see if the materials are complete and whether it is damaged. If you find a problem, please communicate with the manufacturer in time to solve it.

2. After checking the completion of the Bottle Unscrambler, follow the installation instructions to assemble the Bottle Unscrambler and adjust accordingly. Then add lubricating oil to the place that needs lubrication to ensure the flexibility of the Bottle Unscrambler.

3. After the test run Bottle Unscrambler, if it runs normally, it means that the installation of Bottle Unscrambler is completed.

Precautions when using Bottle Unscrambler

1. According to Bottle Unscrambler production conditions, choose to use a power supply that meets Bottle Unscrambler specifications.

2. To prevent electric shock, the Bottle Unscrambler must be well-grounded. Please equip the Bottle Unscrambler with a power socket with a ground wire.

3. After turning off the Bottle Unscrambler power switch, there is still strong voltage in some circuits in the electrical control of the machine. If the control circuit needs to be repaired, the power cord must be unplugged to avoid electric shock.

Matters needing attention when cleaning the automatic Bottle Unscrambler

1. If the company needs to disassemble and wash the Bottle Unscrambler, please do not turn off the air source and power supply.

2. Avoid electric shock to Bottle Unscrambler. When disassembling the Bottle Unscrambler, do not directly rinse the body with water, because the Bottle Unscrambler is equipped with electrical control components. If the components contact the water source, there is a risk of electric shock and may damage the Bottle Unscrambler components.

3. It is strictly forbidden to show the residues of the filled items on the Bottle Unscrambler, such as oil stains, paints, etc. The existence of these things will accelerate the corrosion of the Bottle Unscrambler and affect its service life. If any residual items are found, they should be cleaned up in time.

4. Lubricate the Bottle Unscrambler regularly, clean the Bottle Unscrambler every once in a while, and make a cleaning record for later review.

We have obtained ISO9001 quality management system certification, and some products have passed CE certification. The production of Bottle Unscrambler is strictly controlled. If you are interested in Bottle Unscrambler, you can contact us. Our website is www.cnzpack.com.

In our daily life, Capping Machine plays a vital role for us, so what are the main work processes and precautions of the Capping Machine? Let's take a look together next.

This is the content list:

• The main workflow of Capping Machine

• How to carry out daily maintenance and maintenance of Capping Machine

• How to deal with common problems of Capping Machine　

The main workflow of Capping Machine

We know that after the plastic bottles are sorted by the Capping Machine, they enter the conveyor chain in a single row. In the filling station, the plunger pump injects the liquid in the container into the plastic bottle. After filling, the plastic bottle enters the index plate and stops accurately at the capping station. Manually place the cap of the Capping Machine at the entrance of the friction beltline, take out the capping claw, screw the cap claw, and squeeze the tube claw to complete the capping action. Then the plastic bottle exits the index plate and enters the conveyor chain, and enters the labeling station to complete the round bottle labeling.

How to carry out daily maintenance and maintenance of Capping Machine

1. Always keep the Capping Machine clean, especially for the electrical appliances on the switchboard, to prevent moisture and dust, and it is forbidden to change the program of the inverter and the program controller at will.　

2. The power supply voltage of the Capping Machine should be stable, not exceeding ±15%, the material temperature should be kept at 10℃-40℃, the ambient temperature should be kept at 5℃～40℃, and the temperature should be kept at 5～95%PH.　

3. The flowmeter used by the Capping Machine for spray filling is a precision instrument. Therefore, the oil must be precision filtered before it can be filled.　　

4. Turn off the power supply and oil inlet valve of the Capping Machine after finishing the work.　　

5. Pay attention to the cleanliness of the infrared sensor from the Capping Machine. Frequently wipe it clean with clean cotton. It is strictly forbidden for any object to approach the sensor during the working process, and strong light should not be directly or reflected on the sensor, otherwise, it will prosper and malfunction.

6. Add cylinder lubricating oil to the pneumatic triplet regularly.　　

7. When the machine is not used for a long time, all parts should be wiped clean and covered with plastic or tarpaulin to prevent dust.

How to deal with common problems of Capping Machine

First, what should I do if the cylinder piston of the Capping Machine does not work? Confirm whether the safety emergency stop switch is safe. Confirm that the air supply switch of the Capping Machine is turned on. Check if the Capping Machine one-way signal valve is damaged.

Second, what should I do if the Capping Machine cylinder piston does not return after being pushed to the top? Confirm whether the moving target is in contact with the one-way valve.

Third, how to adjust the filling volume of the Capping Machine is inaccurate or not discharged?

Check whether the upper and lower throttle valves of the Capping Machine are closed, and increase the pumping speed of the throttle valve of the cylinder. Make sure that the Capping Machine quick-install tee is locked with a clamp. Confirm whether there are enough materials in the Capping Machine storage box. Make sure that the joints of the pipes of the Capping Machine are sealed.

Fourth, what should I do if the material of the Capping Machine flows out from the rear end of the cylinder? Check whether the sealing ring on the Capping Machine piston is worn. If it is worn, replace it and make sure that the piston and the piston rod are tight.

In addition to timely handling of problems, it is also necessary to do a good job of preventive work in advance. Doing a good job in daily maintenance can also reduce the failure rate of the Capping Machine. The daily maintenance and maintenance of the Capping Machine cannot be underestimated. This is a very important step. Daily maintenance on time can effectively extend the service life of the Capping Machine, improve the production efficiency of the enterprise, and keep Capping Machine in normal operation throughout the day, reducing manpower. The loss of material resources.

Wenzhou Zungwan Intelligent Machinery Co., Ltd.'s first-class product quality and efficient and quick after-sales service have created excellent products of "Zhonghuan". Products are in great demand in the domestic and foreign markets. Keep improving, develop to satisfy customers, and meet market demands are our eternal topic and our sincere commitment to customers. Therefore, Capping Machine is very popular among consumers. If you are interested in Capping Machine, you can contact us. Our website is www.cnzpack.com.

The Cosmetic Filling Machine and Capping machine is a professional cosmetic filling and capping equipment, which can make the cap tighter without damaging the mouth of the bottle and effectively protect the cosmetics from contact with the outside world. Next, let's take a look at the use and maintenance of the Cosmetic Filling machine and the capping machine. Here are some answers.

Here is the content list:

l Instructions for use of Cosmetic Filling machine And Capping machine.

l How is the daily maintenance of the Cosmetic Filling machine And Capping machine?

Instructions for use of Cosmetic Filling machine And Capping machine.

First, because the Cosmetic Filling Machine and Capping machine is an automated machine, the dimensions of the pop-up bottle, bottle liner, and bottle cap are required to be uniform. Second, before driving, you must first use the crank handle to turn the machine to see if there is any abnormality in the rotation, and then you can drive after it is confirmed that it is normal. Third, when adjusting the machine, the tools should be used appropriately. It is strictly forbidden to use excessive tools or excessive force to dismantle the parts to avoid damage to the machine parts or affect the performance of the machine. Fourth, the Cosmetic Filling machine and the Capping machine must be kept clean. Before the shift, all parts of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department. It should be scrubbed once a week, especially the areas that are not easily cleaned in normal use or blown with compressed air.

How is the daily maintenance of the Cosmetic Filling machine And Capping machine?

First, the Cosmetic Filling Machine and the Capping machine has strict requirements for the placement environment and must ensure the indoor humidity is moderate, ventilated, and hygienic. Because the Cosmetic Filling Machine and Capping machine is a mechanical device, after all, the raw materials are some steel electromechanical, etc. It is easy to rust when placed in a humid environment, and a closed environment is not conducive to the heat dissipation of the equipment during operation. Second, you must ensure that the power supply is normal and the grounding wire is safe before use. Voltage instability can cause considerable damage to the machine. Third, the non-woven soft cloth and cleaning agent must be added to wipe off the oil or dirt and wipe dry before the Cosmetic Filling machine and capping machine are operated. After use, take out all the remaining materials to prevent the materials from corroding the equipment and scrub them clean. Periodically clean the invisible dust and garbage in the chassis. And adhere to the tightness of the mechanical parts. Fourth, clean up the machine regularly. Many companies conduct major maintenance on machinery and equipment once a year in autumn. Fifth, add lubricating oil to the mechanical components of the Cosmetic Filling machine and Capping machine regularly to reduce frictional resistance and make the machine run faster.

Our official website is https:// www.cnzpack.com/. If you are engaged in work related to Cosmetic Filling machines and Capping machines or want to learn more about our company, you can communicate with us on the website.

Bag Packing Machine consists of vacuum pump, motor, vacuum chamber, sealing strip, plexiglass plate cover, airbag, solenoid valve, etc. Bag Packing Machine is a general term for product production and outsourcing machines. It is mainly divided into two aspects, Bag Packing Machine assembly line production and packaging, used in the filling (filling), sealing machine, and coding of (bag, bottle) products in the food, medicine, chemical, and other industries. Bag Packing Machine product peripheral packaging equipment, used for spraying (printing) the production date, sealing, shrinking film, etc. after the product is produced. Then what is the principle and purpose of the Bag Packing Machine? Let's take a look together next.

This is the content list:

l Principle of Bag Packing Machine

l Bag Packing Machine is versatile

Principle of Bag Packing Machine

Bag packaging machine through the suction nozzle into the bag of the packaged goods, emptying air, from the suction nozzle discharge, and then complete sealing.

Bag Packing Machine is versatile

Bag Packing Machine is used in food, chemical, pharmaceutical and agricultural markets. Bag Packing Machine is easy to use and can complete multiple processes at once: bag pulling, bag making, filling, coding, counting, metering, sealing, product conveying, automatically, Bag Packing Machine is unmanned after setting. The Bag Packing Machine is highly efficient. In the Chinese market, the output of fully automatic packaging machines can approach 120-240 bags per minute to replace the old-time manual products, whose output is far more than several times the time. Bag Packing Machine clean, hygienic, and energy-efficient. Bag Packing Machine has the function of clean, hygienic, material saving, bag saving, money saving, and environmental protection.

Since the 1950s, my country's plastic machinery manufacturing industry has undergone rapid development for nearly half a century, especially since the reform and opening up. The Bag Packing Machine has now been built with a complete range of products, the main technical and economic indicators are close to or have reached the advanced level, and the supporting facilities are becoming more and more advanced. Production is gradually specialized, Bag Packing Machine has a large-scale and complete industrial system, and Bag Packing Machine products meet the needs of the domestic market.

We have obtained ISO9001 quality management system certification, and some products have passed CE certification. The main products are a nail polish filling machine, perfume machine, perfume filling machine, powder series automatic quantitative packaging machine and online capping machine and labeling machine, bottle unscrambler, tube filling and sealing machine, cartooning machine, and other packaging equipment. The quality of our Bag Packing Machine and service as well as our integrity are widely praised at home and abroad. We will carry forward the spirit of "comprehensive innovation and perseverance", self-discipline and strive for the first place, and provide new and old customers with better and more complete services with enthusiasm and a new attitude. If you are interested in Bag Packing Machine, you can contact us, our website is www.cnzpack.com.

Most Bag Packing Machines track and adjust various mechanical parameters through intelligent control instruments and menu-type software on the touch screen. The electronic display shows the length of the cut bag, the packaging speed, the net content of the filling, and the packaging output, etc., which can be understood at a glance. The standard color code tracking photoelectric system of the Bag Packing Machine can ensure the correct printing patterns of the packaged products. In addition, Bag Packing Machine can perform online status monitoring and fault diagnosis analysis of the working process. Once a problem occurs, Bag Packing Machine will automatically stop and display the cause and solution of the fault. So how do we maintain the Bag Packing Machine equipment in actual production? Let's take a look together next.

This is the content list:

l Maintenance after production

l Machine parts lubrication

l Care instructions

Maintenance after production

Every day after production, employees must clean the Bag Packing Machine before leaving get off work. First, the material barrels are cleaned in the warehouse, and the remaining materials on the tray are cleaned and kept clean. The remaining materials in other parts are cleaned up to prepare for the next use of the Bag Packing Machine.

Machine parts lubrication

The box part of the Bag Packing Machine is equipped with an oil gauge. The oil should be filled once before the Bag Packing Machine is turned on. It can be added in the middle according to the temperature rise and operating conditions of each bearing. The Bag Packing Machine worm gearbox must store oil for a long time. The oil level is high enough that the worm gear invades the oil. If it is used frequently, the oil must be replaced every three months. There is an oil plug at the bottom for draining oil. When refueling the Bag Packing Machine, do not let the oil spill out of the cup, let alone flow around the Bag Packing Machine and on the ground. Because oil is easy to pollute materials and affect product quality.

Care instructions

Check the parts of the Bag Packing Machine regularly, once a month, check whether the movable parts of the Bag Packing Machine worm gear, worm, lubricating block, bearings, and other moving parts are flexible and worn. If any defects are found, they should be repaired in time and should not be used reluctantly. The Bag Packing Machine should be used in a dry and clean room, and should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body. When the Bag Packing Machine roller moves back and forth during work, please adjust the screws on the front bearing to the proper position. If the gear shaft of the Bag Packing Machine moves, please adjust the screws behind the bearing frame to the proper position, adjust the gap so that the bearing does not make a noise, turn the belt pulley by hand, and tighten properly. Too tight or too loose can make the Bag Packing Machine happen. The possibility of damage. If it is out of service for a long time, the Bag Packing Machine must be wiped and cleaned, and the smooth surface of the machine must be coated with anti-rust oil and covered with a cloth canopy.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer that produces first-class Bag Packing Machine product quality and efficient and fast after-sales service, which has created excellent products of "Zhonghuan". Products are in great demand in the domestic and foreign markets. Keep improving, develop to satisfy customers, and meet market demands are our eternal topic and our sincere commitment to customers. If you are interested in Bag Packing Machine, you can contact us, our website is www.cnzpack.com.

After the Labeling machine sensor sends a signal that the labeling object is ready to be labeled, the drive wheel on the Labeling machine turns up. As the rolled label is in a tight state on the equipment, when the Labeling machine backing paper is tightly attached to the peeling plate and changes direction, the Labeling machine label is forced to disengage due to the rigidity of its material and is ready to be labeled. At this time, the labeling object is located just below the label, under the action of the labeling wheel, to achieve synchronous labeling. After the Labeling machine has finished labeling, the sensor under the roll label sends a stop signal, the drive wheel comes to a standstill, and a labeling cycle end. No matter which type of Labeling machine, the labeling process is roughly the same. The difference is that the installation position of the Labeling machine is different, the labeling object is conveyed differently and positioned differently, and the form of the labeling roller of the Labeling machine is also different. So, what are the Labeling machine's requirements for labels? Let's look at it together next.

This is the content list:

l Surface material

l Release force

l At the end of the paper

l Processing quality

Surface material

Labeling machine label stiffness is the key to labeling, so the Labeling machine surface material is required to have a certain strength and hardness. Labeling machine label stiffness and the thickness of the material and the area of the label, so the Labeling machine in the use of soft film material should be appropriate to increase its thickness, generally controlled at 100μm or more. Labeling machine thin paper materials, such as 60 ~ 70g/m2 labeling paper, are generally not suitable for the production of large labels, but suitable for processing into small labels, such as price tags used on the price tag. Labeling machine label stiffness is not good, it will cause labeling out of the label, or label and backing paper reward so that the automatic labeling failure.

Peel-off force

Labeling machine peel-off force is the force at which the label is separated from the backing paper by the Labeling machine. The Labeling machine release force is related to the type and thickness of the adhesive, the silicone coating on the surface of the backing paper, and the ambient temperature at the time of labeling. If the Labeling machine release force is too small, the label will easily fall off (leave the backing paper) during the conveying process. The Labeling machine's release force is too large, the label will be difficult to detach from the backing paper, and it will not be able to produce labels. The Labeling machine should be integrated control of the technical indicators so that the release force is maintained within a reasonable range.

At the end of the paper

Is also an important indicator to control automatic labeling. The requirements of the Labeling machine base paper surface silicon-coated evenly, the Labeling machine peeling force is consistent. Uniform thickness and good tensile strength ensure that the Labeling machine will not break when labeling. Uniform thickness and good light transmission of the Labeling machine ensure that the sensor can correctly identify the location of the label.

Processing quality

Requires that both sides of the Labeling machine backing paper after slitting should be flat and free of fracture to avoid the backing paper from breaking when the tension changes. Labeling machine die-cutting, to avoid cutting through the backing paper or damage to the silicone layer. If the Labeling machine backing paper and silicone coated layer are destroyed, the Labeling machine backing paper will break easily or the glue in the label will penetrate the backing paper. In addition, the static electricity in the web label must be eliminated before Labeling machine labeling, because static electricity will lead to Labeling machine labeling failure or labeling inaccuracy.

Wenzhou Zungwan Intelligent Machinery Co., Ltd. is a professional equipment manufacturer. Before the Labeling machine leaves the factory, it will conduct a large number of tests on the Labeling machine to maintain the healthy development of the Labeling machine market. If you are interested in the Labeling machine, you can contact us, our website is www.cnzpack.com.

Fertilizer packing machine is the equipment which can pack compost fertilizer, powdery fertilizer and granular fertilizer into bags with the same volume. It can greatly improve the convenience of storage and transportation of fertilizer products. As an auxiliary machine, it takes an irreplaceable part in a complete fertilizer production line.

Plastic Tube packing Machine With Filling And Sealing The model of FGF filling

automatic filling and capping machine bottle Contact - Product: lipo-hydro hot wax- - Speed: up to 2.400/h - Machines: melters 250/5000kg - Packaging: filling, capping automatic filling and capping machine bottle linear Contact Automatic granule filling and packing equipment is used for filling granule product in bottles or cans.

We are a Ahmedabad based manufacturer and supplier of 4 Head Powder Filling Machine, Capping Machine, Screw Capping Machine, ROPP Capping Machine, Automatic Capping Machine, Powder Filling Machine, with a plethora of other machines. Our collection of machines is smart in terms of function because modern technology has been infused in them.

About Us. Focusing on Development, Packaging Industry Leader Since its establishment, …

suppository filling sealing machine: Material: Stainless Steel 304/316: Function: forming-filling-sealing-cooling-cutting: After-sales Service Provided: Engineers available to service machinery overseas: Warranty: 1 year: Product name: suppository filling and …

2 oz. clear PET boston round 20-410 plastic small bottle with white fine mist nasal sprayer. 20 …

Structural improvement is performed on the bag expanding mechanism, the heat sealing mechanism and the discharging mechanism on the basis of the existing technology, packaging can be more stable and reliable, and working efficiency is higher. A full-automatic packaging machine comprises a workbench and a rotating table arranged on the workbench, wherein a …